Pitcher assembly & use

1. Place the motor base on a clean, dry, level surface such as a counter or table
2. Twist the easy-twist extractor blade onto the base of the pitcher, making sure the components are properly aligned and securely fastened. 
3. Place the pitcher onto the motor base and gently twist clockwise so it locks in place. When you hear the click, it's locked and ready to blend 
4. Add the ingredients to the pitcher, making sure they do not exceed the MAX line
5. Place the pitcher lid with the vented lid cap attached on the pitcher, making sure it's aligned to the handle
6. Plug the power cord into an electrical outlet and press POWER to turn on the blender
7. To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn off automatically. Buttons illuminate while in use.
8. If the ingredients stick to the side of the pitcher, press POWER to stop the appliance and wait for the blade to stop turning. Then remove the pitcher lid and use the tamper to dislodge the ingredients. When finished, replace the lid and continue blending. if the ingredients continue to stick, consider adding more liquid
9. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. 
10. Press POWER to turn off the unit completely
11. Twist pitcher counterclockwise and lift off the motor base.
12. Pour and enjoy! 

Cup assembly & use

1. Place the motor base on a clean, dry, level surface such as a counter or table
2. Add ingredients into the NutriBullet cup
3. Twist the easy-twist extractor blade onto the cup until tightly sealed
4. Plug the power cord into an electrical outlet and press POWER to turn on the blender 
5. Turn the cup upside down and place it onto the motor base, gently turning the cup clockwise to lock into the motor base. This will activate the extraction cycle
6. To start blending, select a speed or the EXTRACT program on the blending control panel. This program will turn off automatically. Buttons will illuminate while in use. 
7. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. 
8. Press POWER to turn off the unit completely. 
9. Unlock the assembly by gently twisting the cup counterclockwise. You will hear a click. 
10. ENJOY!