Your Magic Bullet Mini Juicer user guide is the PDF linked at the bottom of this page. It covers safety, assembly, juicing, taking the juicer apart, juicing tips, troubleshooting, cleaning and storage.
What should I do before using my Mini Juicer for the first time?
- Read all the instructions in the guide before you use the juicer.
- Remove and safely throw away any packaging and promotional labels.
- Check the Sieve before each use. Never use a cracked, bent or damaged Sieve.
How do I put the Mini Juicer together?
- Unplug the juicer and place the Motor Base on a clean, dry, level surface.
- Place the Juice Bowl on the Motor Base. It only fits one way, so turn it until it sits in place.
- Line up the Sieve with the drive coupling and push down until it clicks. Hold it by the top edges and do not touch the sharp teeth on its base.
- Fit the Juice Bowl Cover with the Feed Chute over the Sieve and the Pulp Chute at the back.
- Raise both Locking Arms and snap them down until they lock. The juicer will not turn on if the arms are not locked.
- Slide the Pulp Bin onto the back until it snaps into place, put the Food Pusher in the Feed Chute, turn the Spout Cap so it faces down, and set the Juice Cup under the spout.
How do I juice safely?
- Wash and cut your fruit and vegetables. Remove the rind from citrus fruit and the stones from stone fruit.
- Turn the juicer on before you put any food in the Feed Chute.
- Only use the Food Pusher to push food down. Never use your hands, fingers or utensils, and do not push too hard.
- Do not juice frozen fruit or vegetables, or foods with no juice to extract, such as bananas or avocados.
- Empty the Pulp Bin when it is full and the Juice Cup when it reaches the MAX line.
- When you finish, switch the Power Button to OFF. Wait for the Sieve to stop spinning before you remove the Juice Cup or take the juicer apart.
- Never unlock the Locking Arms while the Sieve is still turning.
How do I clean my Mini Juicer?
- Unplug the Motor Base before you clean it.
- All parts except the Motor Base are dishwasher safe. Do not use the heat sanitation cycle.
- Scrub the Sieve with the Cleaning Brush under running water straight after juicing. If pulp has dried on it, soak the Sieve in hot water for 30 minutes.
- Wipe the Motor Base with a clean, damp cloth. Never put the Motor Base in water or any other liquid.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: Read the Magic Bullet Mini Juicer user guide (PDF)