• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
• Touch the solid circle to run the automatic 30-second blending program.
• Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
• After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.

• Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• Replace the Rapid Extractor Blade at least every five years, or at the first sign of wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

If the blender malfunctions, has been dropped or is damaged, stop using it.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it.

If the blender malfunctions, has been dropped or is damaged, stop using it.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
• Touch the solid circle to run the automatic 30-second blending program.
• Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
• After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.

• Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• Replace the Rapid Extractor Blade at least every five years, or at the first sign of wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.

• Choose LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruit. Choose HIGH for thick mixtures and frozen fruit or vegetables.
• Press EXTRACT for a smoothie from whole fruit, vegetables and ice with liquid; the program stops automatically at the end.
• For controlled chopping, press and release PULSE; hold it to keep the blades running and release it to stop. Do not use PULSE with hot ingredients.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the easy-twist extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Press POWER and wait until the blade stops before removing the lid. Move the ingredients with the supplied tamper, replace the lid and resume; if sticking continues, add liquid without exceeding the lower liquid MAX line. Do not use spoons or other utensils that can reach the blade.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Push and twist the sealed cup onto the base to start the 60-second automatic blend; the blue light turns off at the end.
• For chunky salsa or coarse chopped onions, press PULSE within five seconds after starting the blend. The motor stops and the PULSE button flashes blue.
• Hold PULSE to turn the blades; release it to stop. Let the blades stop fully between pulses and repeat only until the desired texture is reached.
• Pulse mode times out after one minute. Twist the cup anticlockwise to the OFF position before restarting normal operation.

• Limit each run to one minute. After three one-minute intervals, let the motor base cool for 2–3 minutes before continuing; let a warm cup cool before opening it. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Lock the sealed cup clockwise onto the base to start the one-minute automatic extraction cycle; no separate start button is required.
• Twist the cup anticlockwise to stop early; wait until the blade has stopped before removing it.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the easy-twist extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• For a smoother drink, add a little more liquid between blends, keeping within the marked fill limit for your cup.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
• To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
• For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.

• Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• Replace the Rapid Extractor Blade every 12–18 months depending on use, or earlier if damaged or no longer rotating freely.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Limit each blend to one minute. Before another cycle, wait 2–3 minutes, check that the cup is no longer warm, carefully open it to release pressure, then retighten the blade. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage.

• Use the supplied milling blade for dry or low-moisture nuts, seeds and grains; do not add liquid or use moist vegetables, soft cheese, coffee or spices. Do not make nut butter, which can jam the blade.
• For chopped nuts, use short pulses. For a finer grind, work in smaller batches, never more than one minute per cycle; check the result and allow the contents to return to room temperature before another cycle.

• For a smoother drink, add a little more liquid between blends, keeping within the marked fill limit for your cup.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it.

• For a smoother drink, add a little more liquid between blends, keeping within the marked fill limit for your cup.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Lock the sealed cup clockwise onto the base to start the one-minute automatic extraction cycle; no separate start button is required.
• Twist the cup anticlockwise to stop early; wait until the blade has stopped before removing it.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the easy-twist extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

Use liquid with the extractor blade and keep ingredients and liquid at or below MAX. Frozen fruit with chilled liquid is the guide’s suggested way to make a cold smoothie; do not use the blender as an ice crusher or process hard ingredients without liquid.

Limit each continuous blend to one minute. Before another one-minute cycle, let the contents settle for 2–3 minutes and check the cup is no longer warm. Carefully open it away from your body to release pressure, then securely refit the blade. Do not use a longer run to overcome a jam or damaged blade.

Check that the blade is not loose or damaged and that its gasket is fully seated. If there is damage, a burning smell, smoke, liquid inside the electrical base or another malfunction, leave the appliance off and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase); do not restart it after cooling. Only if the motor has stopped without any of those warning signs, unplug the base and let it cool for at least 15 minutes to reset the thermal breaker. This motor-cooling period is not a warm-cup opening time; let the cup cool before opening it.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the extractor blade. Never overload the cup with ice; use enough liquid to keep the mixture moving.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Use no more than 45 seconds per interval and never exceed three consecutive 45-second intervals. Between cycles, stop completely, let a warm cup cool, carefully open it to release pressure and wait at least one minute. If the motor stops working, unplug and cool it for one hour.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.

• Choose LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruit. Choose HIGH for thick mixtures and frozen fruit or vegetables.
• Press EXTRACT for a smoothie from whole fruit, vegetables and ice with liquid; the program stops automatically at the end.
• For controlled chopping, press and release PULSE; hold it to keep the blades running and release it to stop. Do not use PULSE with hot ingredients.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the easy-twist extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• For a smoother drink, add a little more liquid between blends, keeping within the marked fill limit for your cup.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• With the base unplugged and the blades stopped, inspect the blade for wear or damage before the next blend.
• Stop using a worn or damaged blade and replace the complete blade assembly; do not keep blending to compensate for it.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
• Touch the solid circle to run the automatic 30-second blending program.
• Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
• After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.

• Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• Replace the Rapid Extractor Blade at least every five years, or at the first sign of wear or damage.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
• Touch the solid circle to run the automatic 30-second blending program.
• Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
• After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.

• Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (New Zealand).
• Replace the Rapid Extractor Blade at least every five years, or at the first sign of wear or damage. Buy a replacement extractor blade (New Zealand).

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
• Touch the solid circle to run the automatic 30-second blending program.
• Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
• After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.

• Keep continuous blending within one minute and do not exceed six consecutive 30-second cycles. Between cycles, open only a cool cup carefully to release pressure; after repeated cycles let contents settle for 10–15 minutes. A continuously flashing panel after repeated cup blends requires unplugging and at least 15 minutes of cooling.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• For residue stuck to the cup or blade, fill the cup with room-temperature water to MAX, add 1–2 drops of dish soap, attach the blade and blend for 20–30 seconds; unplug, detach and scrub away the loosened residue.

• Switch off and unplug, then check that the processor base, blade adapter and chopping blade are fitted securely. Cut ingredients into 2.5–5 cm pieces, remove inedible seeds and stems, and keep the bowl below MAX; use foods suitable for chopping rather than dry-grinding grains or coffee.
• Use the solid-circle 30-second processor cycle; never use the pulse control with the processor bowl.

• Fit the desired disc side upward, align its hash marks with the blade adapter and seat it nearly flush with the work bowl rim. Start processing before adding food, feed gradually and let it move down naturally; do not force the pusher or overfill the chute.
• Use foods that suit slicing or shredding.
• Check that the blade assembly and disc are properly attached.

• If the processor blade or disc stops unexpectedly during processing, switch off and unplug, wait for all moving parts to stop, then clear food from the feed chute. Refit and lock the parts before resuming; do not force more food onto a seized blade or disc.
• For stubborn residue on the processor blade or disc, soak the removed part in room-temperature water with 1–2 drops of dish soap for 20–30 seconds, then scrub away the loosened residue, keeping fingers away from the sharp edges.

• Use the Coffee & Dry Spice Grinder only for dry or dehydrated ingredients below MAX, with no liquid or ice. Hold the dashed-circle pulse control in short 1–2 second bursts until the required grind is reached; release to stop and wait for all movement before removing it.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• For a cold smoothie, use frozen fruit with chilled liquid. Alternatively, add crushed ice up to 25% of the total cup volume and water or another liquid up to the MAX line, never above it.

• Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
• To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.

• Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

• Unplug and remove the cup only after the blades stop. Wash residue off the extractor blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• For best performance, replace the extractor blade about every six months, depending on use, or sooner if it shows wear or damage.

• Stop blending, unplug the base and wait for the blades to stop. Let a warm cup cool before opening it carefully.
• Cut oversized ingredients into smaller, suitable pieces before adding them. Keep the food and liquid within MAX, then refit the blade securely before blending again.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
• To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
• For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.

• Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• Replace the Rapid Extractor Blade every 12–18 months depending on use, or earlier if damaged or no longer rotating freely.

• Keep the combined food and liquid below MAX so the ingredients can circulate. If the blade stalls or the mixture is not moving, stop and unplug; wait until everything is still and the cup is cool before reducing the load or adding liquid, then reseal and refit it.

• Use the extractor blade with liquid for smoothies; do not run it on ice alone. Remove apple seeds and the pits from cherries, plums, peaches and apricots before blending.
• Do not grind dry grains, cereal or coffee with the Rapid Extractor Blade. Use enough liquid with ice or frozen ingredients, and reduce an overloaded ice portion.

• Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
• To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
• For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.

• Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

• Unplug and remove the cup only after the blades stop. Wash residue off the Rapid Extractor Blade with soap, water and a small brush or sponge, without removing the gasket; dry it completely before refitting.
• Inspect the cup and blade before the next blend. Stop using a cracked cup, loose or damaged blade, or blade with a missing or damaged gasket; replace the affected cup or complete blade assembly.
• Replace the Rapid Extractor Blade every 12–18 months depending on use, or earlier if damaged or no longer rotating freely.