• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Leave a warm sealed cup where it is, stop blending and wait at least 30 minutes; do not put it in a fridge or freezer to cool it.
• Wait longer if the cup is still warm; only once completely cool, disengage it from the base and use a towel to slowly untwist the blade with the opening pointed away from your face and body.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Leave a warm sealed cup where it is, stop blending and wait at least 30 minutes; do not put it in a fridge or freezer to cool it.
• Wait longer if the cup is still warm; only once completely cool, disengage it from the base and use a towel to slowly untwist the blade with the opening pointed away from your face and body.

• Keep the pitcher, motor base, blade, lids and all other accessories out of the microwave; heating them this way can damage the appliance.

• Transfer the food to a separate container labelled freezer-safe.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Let a warm cup cool completely, then carefully open it pointed away from your body to release pressure before leaving the mixture to stand; do not leave blended food sealed for long periods, because fruit and vegetable sugars can ferment and build pressure.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Keep the motor base, blade, lids and all other accessories out of the microwave as well; heating them this way can damage the appliance.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

• Never blend hot ingredients in the cup. Start with room-temperature or refrigerated ingredients and liquids, 21°C or cooler.

• Do not use the extractor blade as a storage lid. To store a blend in the cup, seal it with plastic wrap or foil.
• Do not leave blended mixtures sealed for long periods. Sugars in fruit and vegetables can ferment and build up pressure.

• Blend ingredients at 21°C or cooler, then transfer the mixture to a separate unsealed microwave-safe container or a stovetop pot for heating.
• Check the internal temperature of cooked ingredients with a thermometer before blending; food can feel cool outside while remaining hot inside.
• Keep every blender part out of the microwave, oven, stovetop pot and boiling water.

• Remove the extractor blade after blending; cover the Cup with a vented lid or plastic wrap, or transfer the contents to a vented container, and refrigerate.

• Keep the pitcher, motor base, blade, lids and all other accessories out of the microwave; heating them this way can damage the appliance.

• Transfer the food to a separate container labelled freezer-safe.

• Wait for the blade to stop before removing it; do not leave the extractor blade attached as a storage lid.
• For storage in the cup, cover it with plastic wrap or foil instead of the blade; point the opening away from your body when unsealing because stored food can release gas.

NutriBullet Pro+ Matte Black: freezer guidance — no for plastic cups under NutriBullet’s cup-care advice, with lid instructions unavailable.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

NutriBullet 600 Essentials Kit: freezer guidance — no for plastic cups under NutriBullet’s cup-care advice, with lid instructions unavailable.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Leave a warm sealed cup where it is, stop blending and wait at least 30 minutes; do not put it in a fridge or freezer to cool it.
• Wait longer if the cup is still warm; only once completely cool, disengage it from the base and use a towel to slowly untwist the blade with the opening pointed away from your face and body.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Leave a warm sealed cup where it is, stop blending and wait at least 30 minutes; do not put it in a fridge or freezer to cool it.
• Wait longer if the cup is still warm; only once completely cool, disengage it from the base and use a towel to slowly untwist the blade with the opening pointed away from your face and body.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

• Keep the processor Work Bowl and other attachments out of the freezer; they must not be used as freezer storage containers.
• Do not use the Coffee & Dry Spice Grinder Attachment as a food-storage container or put it in either a refrigerator or freezer.

NutriBullet 600 Mega Pack: freezer guidance — no for plastic cups under NutriBullet’s cup-care advice, with lid instructions unavailable.

• Transfer the food to a separate container labelled microwave-safe for heating or freezer-safe for freezing.

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.

For Australian Turbo Ultimate packs NBT07400-1009AK, NBT07400-1009SG and NBT07400-1009SB, use the Storage Lid for blended sauces, dips and dressings in the fridge. The official product page says it twists onto the 32oz Cup and both supplied lids fit both cups.

For a New Zealand pack, follow the storage instructions supplied with that pack.

Turbo Ultimate Pack — official Australian product page (Australia; New Zealand)

• Keep the To-Go Lid, blade, motor base and every attachment out of the microwave, conventional oven, air fryer and stovetop pot; do not immerse them in boiling water to clean or sanitise them.
• Do not use a dishwasher heat or sanitise cycle; excessive heat can warp the parts.

• When the contents are cool and the blade has stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the blend to a vented container; never keep the blade fitted as a storage lid.