• For cups marked ANBCTR24CDB, ANBCTR32CDB or ANBHCTR24CDB, the material is Tritan Renew; match the code on the cup or packaging before ordering. Buy a replacement 700 mL cup (Australia) or 700 mL cup (New Zealand). Buy a replacement 700 mL cup (Australia) or 700 mL cup (New Zealand). Buy a replacement 900 mL cup (Australia) or 900 mL cup (New Zealand).

1. Rinse or scrub the cups and To-Go Lids, then use the dishwasher top rack without a heat or sanitise cycle. Keep those pieces off the bottom rack to prevent warping.
2. Rinse the Rapid Extractor Blade with warm soapy water and remove residue using a small brush or sponge. Do not put parts in boiling water, a microwave, oven, air fryer or stovetop pot to sanitise them.
3. Replace a cup with cracks, cloudiness, warping or other damage. Store the blender upright with nothing on top and the accessories protected; never leave an exposed blade on the base.

• Identify the cup and blade separately when requesting a replacement. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

1. Hand-wash the extractor blade with soap and water, rinse it and dry it completely on its side so both faces dry. Wash cups and To-Go Lids on the top rack without the sanitise cycle, or wash the non-electrical accessories by hand.

• Check the product code before applying that description to a different pack.

1. Hand-wash the extractor blade with soap and water, rinse it and dry it completely on its side so both faces dry. Wash cups and To-Go Lids on the top rack without the sanitise cycle, or wash the non-electrical accessories by hand.

• For cups marked ANBCTR24CDB, ANBCTR32CDB or ANBHCTR24CDB, the material is Tritan Renew; match the code on the cup or packaging before ordering. Buy a replacement 700 mL cup (Australia) or 700 mL cup (New Zealand). Buy a replacement 700 mL cup (Australia) or 700 mL cup (New Zealand). Buy a replacement 900 mL cup (Australia) or 900 mL cup (New Zealand).

1. Rinse or scrub the cups and To-Go Lids, then use the dishwasher top rack without a heat or sanitise cycle. Keep those pieces off the bottom rack to prevent warping.
2. Rinse the Rapid Extractor Blade with warm soapy water and remove residue using a small brush or sponge. Do not put parts in boiling water, a microwave, oven, air fryer or stovetop pot to sanitise them.
3. Replace a cup with cracks, cloudiness, warping or other damage. Store the blender upright with nothing on top and the accessories protected; never leave an exposed blade on the base.

• Check whether the part you need is the sealed cup or the vented pitcher before choosing how to use it.

1. Rinse the cups and To-Go Lids before placing them on the dishwasher top rack; wash the pitcher separately. Avoid the sanitise cycle because high heat can warp the plastic.
2. Inspect the pitcher and its twisting threads for cracking, crazing or breakage; replace a damaged pitcher. Hand-wash the easy-twist extractor blade and keep the cup, base and accessories out of the microwave.

• Match your cup to the product code, and treat the blade assembly as a separate component.

1. For NB07100-1008DG, rinse cups and lids before top-rack washing, without a sanitise cycle. Hand-wash the easy-twist extractor blade, remove residue with a small brush, and dry the blade completely.
2. Keep cups and accessories out of the microwave. Check the bottom of the blade for cracks or breakage and replace the assembly immediately if damaged; leave its components and gasket assembled during cleaning. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Identify the 900 mL cup, 700 mL handled cup or 590 mL travel cup before requesting a material or replacement check.

1. For NB07100-1208DG, rinse or briefly scrub cups and To-Go Lids before top-rack washing, without a sanitise cycle. Hand-wash the blade with soap and water and keep all accessories out of the microwave.

• Check the part itself: a pack containing cups does not automatically include a pitcher.

1. For NB07200-1007DG, rinse cups and To-Go Lids before top-rack washing, without a sanitise cycle. Clean the blade promptly with soap and water, dislodge residue with a small brush and dry it fully.

• Match the vessel to its own cleaning instructions.
• The metal blades are stainless steel; the dough blade is BPA-free EPS plastic. Choose the dough blade for kneading rather than treating every attachment as a metal chopping blade.

1. Cover sharp blades and discs, and store processor components inside the Work Bowl with its lid fitted. Do not freeze parts, microwave them or boil them to clean them.

• Keep the detachable cup blade separate from the pitcher with its integrated blade when cleaning.

1. For NBF07500-1210DG, rinse cups and lids before top-rack washing, and wash the pitcher without a sanitise cycle. Hand-wash the cup blade; keep accessories out of the microwave and replace a pitcher with damaged threads, cracks or crazing. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

• The power extractor blade and integrated pitcher blade are stainless steel; distinguish these two blade assemblies before cleaning or replacing a part.

1. Wash cups, To-Go Lids and the pitcher on the top rack without a sanitise cycle. Keep cups out of the microwave and freezer; freezing can make them brittle.

• Identify the complete pitcher separately from its metal cutting edges when requesting a replacement. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. Wash the pitcher, lid and lid cap in the dishwasher as directed in the guide. Handle the integrated blade carefully and do not try to remove it from the pitcher.

• Keep the detachable cup blade separate from the pitcher with its integrated blade when cleaning.

1. For NBF07500-1008DG, rinse cups and lids before top-rack washing and rinse the pitcher before cleaning it without a sanitise cycle. Hand-wash the tamper and cup blade; replace a pitcher with cracks, crazing or damaged threads. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

• Check the detachable cup separately from the motor base and integrated blade assembly.

1. Wash the cup and lid on the top rack without a heat or sanitise cycle. After switching off, hand-wash those pieces in warm soapy water if preferred; gently clean the fixed blade assembly. Do not run the motor base under water.
2. Store the Portable Blender upright with its cup attached so the fixed blade is covered, and do not stack objects on top.

• Identify the cup separately from the motor base, blade and lid assembly.

1. Wash only the Blending Cup and To-Go Lid on the dishwasher top rack. Keep the motor base, blade and lid assembly out of the dishwasher. NEVER submerge the entire Motor Base, Blade, and Lid in water. wipe it gently with a damp cloth, keeping fingers clear of the blade.

• Identify the cup separately from the motor base, blade and lid assembly.

1. Wash only the Blending Cup and To-Go Lid on the dishwasher top rack. Keep the motor base, blade and lid assembly out of the dishwasher. NEVER submerge the entire Motor Base, Blade, and Lid in water. wipe it gently with a damp cloth, keeping fingers clear of the blade.

Match the complete code on your blender. These material details apply only to the named part and listed codes.

• The Flex Portable guide identifies a silicone charge-port cover. Keep that cover closed when cleaning the detachable cup, blade block and sip lid; wipe the motor base.

1. Hand-wash the Cup, Blade Block and Sip Lid with warm soapy water. The Cup and Sip Lid may also go on the dishwasher top rack without a sanitise cycle; dry the Blade Block completely before reattaching it and store the blender upright with the Blade Block secured to the Cup.
2. If the Sip Lid gasket shifts during washing or drying, remove excess moisture from its channel and gently guide the gasket back into position before using the lid.

The supplied cups for NB07300, NB07300B, NB07300MA, NB07300L, NB07300S, NB07300TQ and NB07300W are BPA-free. The supplied cup for GO Black NB07300 is Tritan plastic.

The separately sold GO replacement cup BDM-VE032CDB is BPA-free plastic. These statements describe the cups only.

• Check the NBJ07100 product code before using these container-material descriptions.

1. After use, switch off, unplug and wait for the sieve to stop. Brush the sieve under running water using the cleaning brush, keeping fingers clear of the cutting teeth; inspect the clean mesh before refitting it.

• Identify the juice bowl and the rest of the auger separately when asking about their materials.

1. Before cleaning, switch off, unplug, let the juicer cool and wait for all parts to stop. Wash the detachable parts in warm soapy water and wipe the base with a damp cloth.

• The two storage bottles supplied with NBJ07200 are glass; keep their cleaning and storage needs separate from those of the pitcher.

1. After use, switch off, unplug and wait for the sieve to stop. Brush the sieve under running water using the cleaning brush, keeping fingers clear of the cutting teeth; inspect the clean mesh before refitting it.

• After cleaning underneath the bowl, press that cover fully back into place so it sits flush.

1. Clean beneath the juicing bowl, including the cover, spouts and spout cover. Wash detachable parts in warm soapy water or in the dishwasher; avoid metal sponges and abrasive tools, and wipe the motor base separately.
2. Do not use a dishwasher sterilise cycle, and do not put parts in a microwave or boiling water to clean them. Dry detachable pieces before reassembly.

• Use a soft cloth or non-abrasive sponge rather than a metal tool or oven cleaner. NEVER submerge the main unit in water.

1. Switch off, unplug and allow the air fryer to cool, then remove the basket and tray. Wash them in warm soapy water or on the dishwasher top rack without a sanitise cycle; dry all parts and store the appliance assembled in a dry place.

• Protect those surfaces by avoiding abrasive or metal cleaning tools.

1. Switch off, unplug and cool the air fryer before removing the basket and tray. Both detachable cooking parts are top-rack dishwasher-safe; use a normal wash without the sanitise cycle. NEVER submerge the main unit in water.

• Use non-abrasive cleaning tools, and avoid metal tools that could scratch those surfaces. NEVER submerge the main unit in water.

1. Switch off, unplug and cool the air fryer before removing its drawers and trays. Wash them in warm soapy water or on the top dishwasher rack without a sanitise cycle; dry every part and store the appliance fully assembled in a safe, dry place.

• The Australian product description calls the ceramic-coated non-stick components PFAS-free; apply that description to the coated components only. NEVER submerge the main unit in water.

1. After switching off, unplugging and cooling, wash the basket and tray without abrasive tools or oven cleaner. Use warm soapy water or the top dishwasher rack without a sanitise cycle, then dry the parts before storage.

• Avoid abrasive or metal cleaning tools so those surfaces are not damaged. NEVER submerge the main unit in water.

1. After switching off, unplugging and cooling, wash the baskets, trays and racks on the dishwasher top rack without a sanitise cycle, or by hand. Dry them thoroughly before reassembly and storage.

• For the Deluxe NBI07110 set, the cup and chopping bowl are BPA-free Tritan; identify the vessel separately from its lid and drive attachment. NEVER submerge the main unit in water.

1. Wash the chopping bowl, whisk, blending cup and chopping blade in warm soapy water or the dishwasher. Hand-wash the blending arm, whisk holder and chopping-bowl lid without soaking; these geared parts are not dishwasher-safe. Avoid metal sponges, dry all parts thoroughly and store in a dry place.

• Use the supplied spatula, or wooden or plastic utensils, to protect the pot coating.

1. Hand-wash the Cooking Pot with warm soapy water; soak stuck food inside the pot until it loosens instead of scraping the coating. The steaming basket, spatula and measuring scoop may go in the dishwasher; do not use steel wool on the pot or sealing panel.
2. After each use, clean the cooled heating plate, sealing panel and condensation collector with a damp cloth. Remove the steam-vent plug, rinse it with warm water and wipe inside the vent. NEVER submerge the main unit in water.

• Keep the batchbowl, short cup, lids and storage accessories identified separately when following their care instructions.

1. Do not sterilise the Baby plastic accessories with hot water or steam, or expose them to sudden temperature changes. Hand-wash the blade and leave its seal fitted; use the correct storage containers rather than the Batchbowl for storage.
2. Wash the cups and Batchbowl on the top dishwasher rack or by hand in warm soapy water. Keep the hand-washed blade out of the dishwasher and do not boil or steam the plastic accessories.

• Check the product code before applying this description to another Value Pack component.

1. Before cleaning, switch off, unplug and wait for every moving part to stop, then detach the cup and cross blade from the motor base. Leave the blade seal in place when cleaning.
2. Hand-wash the Cross Blade rather than putting it in the dishwasher, then dry it on its side. Cups, lids and lip rings may go on the top rack without a sanitise cycle.

• Check the product code before applying this description to another Value Pack component.

1. Before cleaning, switch off, unplug and wait for every moving part to stop, then detach the cup and cross blade from the motor base. Leave the blade seal in place when cleaning.
2. Hand-wash the Cross Blade rather than putting it in the dishwasher, then dry it on its side. Cups, lids and lip rings may go on the top rack without a sanitise cycle.

• Identify the single-serve cup separately from the pitcher when choosing a lid, blade assembly or cleaning method.

1. Switch off, unplug and wait for the blade to stop; separate the vessel from the base and remove leftover ingredients before twisting off the blade. Hand-wash the cup, pitcher and accessories, or use the top rack without heat/sanitise cycles.

• Handle it by the rim and clean the mesh with the supplied brush without touching the sharp cutting teeth.

1. Brush the sieve immediately after juicing and rinse the attachments. Use the dishwasher top rack without the heat sanitation cycle for detachable parts, and wipe the motor base separately.

• Identify it separately from the chopping blade and reversible slice/shred disc before cleaning or choosing an attachment.

1. Wash the removable bowl, cups, lids, pusher, blades and disc on the dishwasher top rack or by hand. Avoid the sanitise cycle and store all pieces together in a safe place where they will not be damaged or cause harm.

1. Rinse the Rapid Extractor Blade in warm soapy water and remove residue with a small brush or sponge promptly after use. Rinse or scrub cups and To-Go Lids before top-rack washing; never put parts in boiling water.