Replacement cooking baskets or drawers and their matching trays fit the appliance they are listed for; some models also have a separate grill plate, wire rack or rear spacer. The part names and fitting checks below help you choose the right replacement and prepare it for use.
How do I choose and prepare a replacement?
- Match the appliance label to the model below, then choose parts sold or recommended for that appliance.
- Switch OFF, unplug and let the air fryer cool fully before removing or fitting parts. If cooking is underway, pause or stop it and wait for the cooking action to stop before pulling out the basket or drawer.
- Use the handles and insulated oven gloves for hot parts; keep your hands and face away from escaping steam and remove drawers slowly to avoid splashes.
- Inspect the replacement and the parts it joins before use. Stop using a damaged detachable part and replace it; do not run the air fryer with damaged parts.
- Remove packaging and promotional labels, then wash the removable cooking parts in hot soapy water before their first use. Place the base on a clean, dry, level, heat-resistant surface with room for ventilation.
How do I keep the replacement parts in good condition?
- After each use, remove the cooking baskets or drawers and their trays; wash them in warm soapy water or on the dishwasher top rack. Never use a sanitise cycle, which can deform parts.
- Clean coated cooking surfaces gently. Avoid abrasive pads and metal cleaning tools, which can damage the non-stick surface.
- Wipe the base interior and exterior with a damp cloth; use a warm cotton cloth for residue on the inner wall and a dry cloth afterwards. Keep the base out of the dishwasher.
- Dry every cleaned part thoroughly before refitting it, then store the air fryer fully assembled in a safe, dry place.
- After fitting the tray and basket, keep food at least 50 mm below the top. Keep food away from the heating element and do not use the basket for deep frying with oil.
NutriBullet CrispLite Air Fryer 6L
Use the cooking basket and its 3-in-1 reversible grill, pizza and crisping plate specifically listed for the CrispLite Air Fryer 6L.
Which parts should I match?
- Match the NutriBullet CrispLite Air Fryer 6L cooking basket to the full appliance name and label; its listed capacity is 6 L.
- Identify the NutriBullet CrispLite Air Fryer 6L 3-in-1 reversible grill, pizza and crisping plate as the separate insert inside the basket, and request that part if only the insert is damaged.
- Order the NutriBullet CrispLite Air Fryer 6L replacement by its full appliance name and the part name above through NutriBullet Australia or NutriBullet New Zealand. If a listing does not name your appliance, ask for a fit check using your appliance-label code before buying.
How do I check that the parts are fitted correctly?
- Set the 3-in-1 reversible grill, pizza and crisping plate securely and level in the bottom of the NutriBullet CrispLite Air Fryer 6L cooking basket. A tilted or loose tray needs to be removed and reseated before cooking.
- Hold the cooking basket by its handle and slide it fully into the NutriBullet CrispLite Air Fryer 6L base. The basket must be fully seated for operation; if it does not seat, remove it and recheck the tray position before trying again.
What care does the ceramic coating need?
- Do not use oven cleaner on the NutriBullet CrispLite Air Fryer 6L cooking basket or 3-in-1 tray. After the base is unplugged and cold, a soft-to-medium bristle brush may be used on the heating element if food particles remain. NEVER submerge the main unit in water.
NutriBullet XXL Digital Air Fryer 7L
Use the cooking basket and crisping tray for the XXL Digital Air Fryer 7L; basket BDM-VE054CDB needs an exact appliance-revision check before ordering.
Which parts should I match?
- Match the NutriBullet XXL Digital Air Fryer 7L cooking basket to the full appliance name and label; its listed capacity is 7 L.
- Identify the NutriBullet XXL Digital Air Fryer 7L crisping tray as the separate insert inside the basket, and request that part if only the insert is damaged.
- Order the NutriBullet XXL Digital Air Fryer 7L replacement by its full appliance name and the part name above through NutriBullet Australia or NutriBullet New Zealand. If a listing does not name your appliance, ask for a fit check using your appliance-label code before buying.
- For the NutriBullet XXL Digital Air Fryer 7L, ask about cooking basket BDM-VE054CDB and provide the appliance-label code so the exact revision can be checked before ordering.
How do I check that the parts are fitted correctly?
- Set the crisping tray securely and level in the bottom of the NutriBullet XXL Digital Air Fryer 7L cooking basket. A tilted or loose tray needs to be removed and reseated before cooking.
- Hold the cooking basket by its handle and slide it fully into the NutriBullet XXL Digital Air Fryer 7L base. The basket must be fully seated for operation; if it does not seat, remove it and recheck the tray position before trying again. NEVER submerge the main unit in water.
NutriBullet Twin Drawer Air Fryer
Use a cooking drawer or crisping tray listed for the Twin Drawer Air Fryer, matching the affected drawer and full appliance-label code.
Which parts should I match?
- For the NutriBullet Twin Drawer Air Fryer, identify which of the two cooking drawers needs replacing and match it to the appliance-label code.
- Choose a NutriBullet Twin Drawer Air Fryer crisping tray for the bottom of the cooking drawer; there are two trays in the assembly, one for each drawer.
- Order the NutriBullet Twin Drawer Air Fryer replacement by its full appliance name and the part name above through NutriBullet Australia or NutriBullet New Zealand. If a listing does not name your appliance, ask for a fit check using your appliance-label code before buying.
How do I check that the parts are fitted correctly?
- Remove the packing inserts underneath both cooking drawers before first use. Set each crisping tray into the bottom of its drawer so it is secure and level.
- Hold each drawer by its handle and slide it fully into the base. The NutriBullet Twin Drawer Air Fryer will not operate unless the drawers are installed correctly; if one does not seat, remove it and recheck the tray position before trying again. NEVER submerge the main unit in water.
NutriBullet CrispLite Vision Air Fryer 8L
Use the cooking basket and 3-in-1 reversible grill, pizza and crisping plate listed for the CrispLite Vision Air Fryer 8L.
Which parts should I match?
- Match the NutriBullet CrispLite Vision Air Fryer 8L cooking basket to the full appliance name and label; its listed capacity is 8 L.
- Identify the NutriBullet CrispLite Vision Air Fryer 8L 3-in-1 reversible grill, pizza and crisping plate as the separate insert inside the basket, and request that part if only the insert is damaged.
- Order the NutriBullet CrispLite Vision Air Fryer 8L replacement by its full appliance name and the part name above through NutriBullet Australia or NutriBullet New Zealand. If a listing does not name your appliance, ask for a fit check using your appliance-label code before buying.
How do I check that the parts are fitted correctly?
- Set the 3-in-1 reversible grill, pizza and crisping plate securely and level in the bottom of the NutriBullet CrispLite Vision Air Fryer 8L cooking basket. A tilted or loose tray needs to be removed and reseated before cooking.
- Hold the cooking basket by its handle and slide it fully into the NutriBullet CrispLite Vision Air Fryer 8L base. The basket must be fully seated for operation; if it does not seat, remove it and recheck the tray position before trying again.
What care does the ceramic coating need?
- Do not use oven cleaner on the NutriBullet CrispLite Vision Air Fryer 8L cooking basket or 3-in-1 tray. After the base is unplugged and cold, a soft-to-medium bristle brush may be used on the heating element if food particles remain. NEVER submerge the main unit in water.
NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L
Use the Dual Stack / Stacked Air Fryer 9L cooking baskets, crisping trays, wire racks or rear cord wrap/wall spacer listed for this appliance.
Which parts should I match?
- Match a replacement NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L cooking basket to the appliance: the assembly uses two 4.5 L baskets.
- Choose the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L crisping tray that sits in the bottom of its cooking basket; the pack has two trays.
- For an extra cooking layer, identify the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L wire rack; fit one above the tray with its handles upwards.
- Keep the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L cord wrap/wall spacer fitted to the rear receiver; identify this part separately when requesting a replacement.
- Order the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L replacement by its full appliance name and the part name above through NutriBullet Australia or NutriBullet New Zealand. If a listing does not name your appliance, ask for a fit check using your appliance-label code before buying.
How do I check that the parts are fitted correctly?
- Snap the cord wrap/wall spacer into its receiver on the back of the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L base before use; leave at least 200 mm of ventilation space as directed by the guide. NEVER submerge the main unit in water.
- Seat each crisping tray securely and level in the bottom of its cooking basket. For multi-layer cooking, put the wire rack above the tray with the rack handles facing up.
- Hold the cooking basket by its handle and slide it fully into the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L base. The basket must be fully seated for operation; if it does not seat, remove it and recheck the tray position before trying again.
How do I clean the extra wire racks?
- Remove the wire racks as well as the crisping trays before washing the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L baskets. The racks can also go on the top dishwasher rack or be washed in warm soapy water; protect their coated surfaces from abrasive or metal tools.
- With the NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L switched off, unplugged and fully cold, use a soft-to-medium bristle brush to clear food from the heating element if needed.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet CrispLite Air Fryer 6L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet XXL Digital Air Fryer 7L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Twin Drawer Air Fryer user guide (PDF)
The full steps for this model are in its user guide: NutriBullet CrispLite Vision Air Fryer 8L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L user guide (PDF)