Use the Rapid Extractor Blade and genuine accessories designed for the model named above. Match its full product code before ordering.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

Use the Rapid Extractor Blade and genuine accessories designed for the model named above. Match its full product code before ordering.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

Match both the cup and the 2.0 Easy-Twist Extractor Blade to the model named above before putting them on the base.

The 900 mL pitcher ANBP32CDB is supplied without a blade. Fit the Easy-Twist Extractor Blade to the bottom of the pitcher, keeping it aligned and tightening it securely. Buy a replacement NutriBullet 900ml Pitcher (Australia) or NutriBullet 900ml Pitcher (New Zealand).

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

• Also inspect the pitcher and its twisting threads for cracking, crazing or breakage; replace a damaged pitcher rather than continuing with its blade assembly.

1. Rinse and brush food from the pitcher before dishwasher cleaning, or hand-wash it with soap and water; keep fingers away from its blades and never use the sanitise cycle.

1. Store the pitcher upright with its lid fitted and nothing resting on the lid; keep the other parts in a safe place.

1. Do not use a pitcher that does not align properly with its blade; correct the assembly before use and replace damaged parts. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

1. For food stuck in an undamaged pitcher, fill it to MAX with water at 21°C or cooler and one or two drops of dish soap, attach its lid and blend for 20–30 seconds; stop and unplug before scrubbing.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

• Inspect the blade before every use; when adding crushed ice, keep it to no more than one-quarter of the cup volume and include liquid up to the MAX line.

Match both the cup and the 2.0 Easy-Twist Extractor Blade to the model named above before putting them on the base.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet 1000 Series. Keep the original part code with your enquiry.

Order genuine parts specifically designed for the Turbo and give the full model when ordering. Do not substitute an aftermarket blade or cup.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

• Inspect the blades before each use; do not repeatedly crush ice or other hard ingredients without liquid because this can dull or damage them.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet 1200 Series / 12 Piece. Keep the original part code with your enquiry.

For N12-1007, match the extractor blade, 900 mL cup, 900 mL handled cup, flip-top lids, lip rings and vessel grip; the pack also includes the motor base.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet 1200 Series / 10 Piece. Keep the original part code with your enquiry.

Match both the cup and the 2.0 Easy-Twist Extractor Blade to the model named above before putting them on the base.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

Use the full McLaren product code when requesting a cup or extractor blade. Choose a cup or extractor blade only when its listing names product code N10-0807GO-MC, or have the exact fit checked before ordering.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet 1000 Essentials McLaren. Keep the original part code with your enquiry.

Use cups and extractor blades intended for the exact 700 Series model. Give the model when ordering; a similar shape or stated capacity is not enough to choose a compatible part.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

1. Inspect the extractor blade for free rotation and a present, undamaged gasket; stop using it and replace it if the blade cannot rotate freely or the gasket is missing.

• Do not use the extractor blade to grind dry grain, cereal or coffee, and remove utensils before blending.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

• Inspect the pitcher and its twisting threads for cracks, crazing or breakage; replace a damaged pitcher and never use it if it fails to align with its blade.

1. Rinse and scrub the pitcher before dishwasher washing, or hand-wash with soap and water; avoid the sanitise cycle and keep fingers away from its sharp blade.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet Pro+ Matte Black. Keep the original part code with your enquiry.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

Use the Rapid Extractor Blade and genuine accessories designed for the model named above. Match its full product code before ordering.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

Use the Rapid Extractor Blade and genuine accessories designed for the model named above. Match its full product code before ordering.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

Use the extractor blade with a single-serve cup. The pitcher has an integrated blade; the processor bowl uses its blade adaptor with the chopping blade, dough blade or reversible slice/shred disc.

1. Switch off, unplug and wait until the motor stops; detach the cup, pitcher or Work Bowl before changing or cleaning attachments.

Match both the cup and the 2.0 Easy-Twist Extractor Blade to the model named above before putting them on the base.

The pitcher blade is integrated into the pitcher. Keep that assembly together and use the detachable extractor blade only with the cups named for the model.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

• Also inspect the pitcher and its twisting threads for cracking, crazing or breakage; replace a damaged pitcher rather than continuing with its blade assembly. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. Rinse and brush food from the pitcher before dishwasher cleaning, or hand-wash it with soap and water; keep fingers away from its blades and never use the sanitise cycle.

1. Store the pitcher upright with its lid fitted and nothing resting on the lid; keep the other parts in a safe place.

1. Do not use a pitcher that does not align properly with its blade; correct the assembly before use and replace damaged parts. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. For food stuck in an undamaged pitcher, fill it to MAX with water at 21°C or cooler and one or two drops of dish soap, attach its lid and blend for 20–30 seconds; stop and unplug before scrubbing.

For NutriBullet SmartSense Blender NBF07600, match the part you need to these listed replacement codes.

Check the current listing for the pieces included and availability.

The pitcher blade is integrated into the pitcher. Keep that assembly together and use the detachable extractor blade only with the cups named for the model.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

• Also inspect the pitcher and its twisting threads for cracking, crazing or breakage; replace a damaged pitcher rather than continuing with its blade assembly. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. Rinse and brush food from the pitcher before dishwasher cleaning, or hand-wash it with soap and water; keep fingers away from its blades and never use the sanitise cycle.

1. Store the pitcher upright with its lid fitted and nothing resting on the lid; keep the other parts in a safe place.

1. Turn off, unplug and wait until all moving parts stop, then remove the pitcher from the motor base before inspecting or washing it.

The pitcher blade is integrated into the pitcher. Keep that assembly together and use the detachable extractor blade only with the cups named for the model.

1. Switch off, unplug and wait for all movement to stop; detach the cup and easy-twist extractor blade from the motor base before unscrewing the blade from the cup.

1. Screw the blade securely onto the cup before fitting it to the base; keep the ingredients below MAX and wait until the motor has stopped before removing the assembly.

• Also inspect the pitcher and its twisting threads for cracking, crazing or breakage; replace a damaged pitcher rather than continuing with its blade assembly. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. Rinse and brush food from the pitcher before dishwasher cleaning, or hand-wash it with soap and water; keep fingers away from its blades and never use the sanitise cycle.

1. Store the pitcher upright with its lid fitted and nothing resting on the lid; keep the other parts in a safe place.

1. Do not use a pitcher that does not align properly with its blade; correct the assembly before use and replace damaged parts. Buy a replacement pitcher (Australia) or pitcher (New Zealand).

1. For food stuck in an undamaged pitcher, fill it to MAX with water at 21°C or cooler and one or two drops of dish soap, attach its lid and blend for 20–30 seconds; stop and unplug before scrubbing.

The pitcher blade is integrated into the pitcher. Keep that assembly together and use the detachable extractor blade only with the cups named for the model.

• Inspect the pitcher blades regularly; stop using the pitcher if the blades are damaged or no longer turn smoothly or freely.
• Check the pitcher for cracks, cloudiness or other damage and replace it if damaged; never use a pitcher that does not fit the motor base correctly.

1. Turn off, unplug and wait until all moving parts stop, then remove the pitcher from the motor base before inspecting or washing it.

1. Rinse and scrub the pitcher with a dish brush before dishwasher cleaning, or hand-wash with soap and water; use a brush or sponge for stuck food without touching the sharp edges.
2. Avoid the sanitise cycle because high heat can warp the pitcher.

• Also inspect the removable cup blade; if its blades are damaged or cannot rotate freely, discontinue use and arrange a matching replacement.

• Do not grind dry grain, cereal or coffee; keep accessories off the bottom dishwasher rack and do not use a heat or sanitise cycle.

• For residue in an undamaged cup or pitcher, fill to the liquid MAX line with 21°C water and one or two drops of dish soap; fit the cup blade or pitcher lid and vented cap, blend on LOW for 20–30 seconds, then stop and unplug before scrubbing.

Use a clear photo of the appliance label and the original part, including its tabs, threads or connector, so the replacement can be matched to NutriBullet Power Core Plus. Keep the original part code with your enquiry.

Use genuine attachments and replacement parts specifically designed for the model named above. Match the full product code before buying.

Match the cup and to-go lid to the Portable Blender. The blade assembly is part of the motor base; do not take the motor base apart to change the blades.

1. During the warranty period, speak to our team before removing the blade so you receive the correct safety and replacement instructions.
2. Turn the blender off and unplug its charger before handling or cleaning the blade; wait until the blades stop before removing the cup or lid, and keep your fingers away from the edges.

1. If a blockage stops an otherwise undamaged blade, add liquid and try again; shake or invert the blender to move the blockage, or turn it off before using a utensil to clear it.

Use genuine attachments and replacement parts specifically designed for the model named above. Match the full product code before buying.

The motor base, blade and lid form one assembly. Keep them together; use the stainless steel blending cup and the separate to-go lid for their intended roles.

1. Unplug the charger and leave the blender undisturbed for 90 seconds until it shuts down before cleaning or handling the blade; do not place fingers near its sharp edges when attaching the cup.

Use genuine attachments and replacement parts specifically designed for the model named above. Match the full product code before buying.

The motor base, blade and lid form one assembly. Keep them together; use the Tritan blending cup and the separate to-go lid for their intended roles.

1. Unplug the charger and leave the blender undisturbed for 90 seconds until it shuts down before cleaning or handling the blade; do not place fingers near its sharp edges when attaching the cup.

Use genuine attachments and replacement parts specifically designed for the model named above. Match the full product code before buying.

If the Sip Lid with Carry Loop gasket moves during cleaning or drying, remove excess moisture from the gasket area and gently guide it back into place.

1. During the warranty period, speak to our team before removing the blade for safety instructions and replacement.
2. Turn off the blender and wait for the blade to stop; detach the Blade Block with a clockwise twist, holding it away from the cutting edges.

1. If the blade is obstructed, stop blending and add more liquid, or detach and gently shake or invert the Cup to shift the ingredients. For a persistent blockage, turn off and unplug the charger, twist off the Motor Base, place the vessel upside down on its closed Sip Lid, and carefully detach the Blade Block before clearing the obstruction. Never insert a hand or utensil inside the Cup to clear a blockage.

1. Turn off the blender after use before cleaning; handle the blade assembly carefully without touching its sharp edges.

• For NBJ07100, replace the sieve every 12 months under high use, or as needed for best performance. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).
• Stop using the juicer if the sieve is damaged or its filter mesh is torn, crinkled or deformed; replace the damaged sieve. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).
• If the juicer becomes louder or develops unusual noise or vibration over time, stop and inspect the sieve and cleaning brush for wear; these consumable parts may need replacement. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).

1. Switch off, unplug and wait until the sieve and motor stop completely before opening the juicer.
2. Release the Locking Handle from the Basin Cover and lower it; lift the Pulp Basin, Basin Cover and Sieve together off the motor base and take them to the sink. Lift out the Food Pusher and Basin Cover, then gently lift the Sieve straight up from the centre of the Pulp Basin.

1. If juice extraction drops, first remove residue from the Juicing Screen; blocked holes can reduce output even when the screen does not need replacing.

1. Turn off, unplug, allow the juicer to cool and wait until all moving parts stop; close the juice spout, remove the juice and pulp containers, and twist the Juice Bowl Lid anticlockwise to lift it off.
2. Lift out the Auger, remove the Juice Bowl, then lift the Juicing Screen and Rotating Bowl Brush out together; slide the bowl brush downward off the screen.

1. If parts are difficult to separate, finish processing the remaining food for about 30 seconds without adding more produce, then stop and unplug before disassembly; adding water through the chute after juicing can help release residue.

• For high use, replace the sieve every 12 months or as needed for best performance. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).
• Stop using the juicer if the sieve is damaged or its filter mesh is torn, crinkled or deformed; replace the damaged sieve. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).
• If the juicer becomes louder or develops unusual noise or vibration over time, stop and inspect the sieve and cleaning brush for wear; these consumable parts may need replacement. Buy a replacement sieve/screen (Australia) or sieve/screen (New Zealand).

1. Switch off, unplug and wait until the sieve and motor stop completely before opening the juicer.
2. Release the locking handle, lift out the Food Pusher and Basin Cover, then gently lift the Sieve straight up from the centre of the Pulp Basin.

1. Turn the Dial to OFF, unplug and wait for the Auger and motor to stop; open the Lid, turn the Hopper anticlockwise until the arrows separate, then lift it off.
2. Pull the Auger straight up out of the Juicing Bowl, then lift the bowl off the motor base to inspect and clean the parts.

1. Refit the Juicing Bowl with its spouts aligned to the motor-base notches; push the Auger firmly into the centre until it reaches the bottom and locks.

Match both the cooking basket and the 3-in-1 reversible grill, pizza and crisping plate to the named air fryer capacity. Order genuine parts for that model, and let hot components cool before handling them.

1. Turn the air fryer off, unplug it and let it cool completely before removing the Cooking Basket and 3-in-1 Tray; clean removable parts after every use so oil and food residue do not build up.
2. Wash the Cooking Basket and 3-in-1 Tray on the dishwasher top rack or with warm, soapy water; never use the sanitise cycle because the high heat can warp parts.
3. Use no abrasive or metal cleaning tools or oven cleaner on the Cooking Basket and 3-in-1 Tray; they can damage the ceramic non-stick coating.
4. Wipe residue from the inner wall of the Air Fryer Base with a warm cotton cloth, then dry it with a dry cloth; wipe the exterior with a damp cloth. NEVER submerge the main unit in water.
5. With the appliance unplugged and fully cool, remove food particles from the heating element using a soft-to-medium-bristle brush if needed.
6. Dry all parts thoroughly and reassemble before storing the air fryer in a safe, dry place.

Identify the XXL cooking basket and crisping tray separately. Use only attachments recommended or sold for the appliance, and let the basket and tray cool before removing them.

1. Turn the air fryer off, unplug it and let it cool completely before removing the Cooking Basket and Crisping Tray; clean removable parts after every use so oil and food residue do not build up.
2. Wash the Cooking Basket and Crisping Tray on the dishwasher top rack or with warm, soapy water; never use the sanitise cycle because the high heat can warp parts.
3. Use no abrasive or metal cleaning tools on the Cooking Basket and Crisping Tray; they can damage the non-stick coating.
4. Wipe residue from the inner wall of the Air Fryer Base with a warm cotton cloth, then dry it with a dry cloth; wipe the exterior with a damp cloth. NEVER submerge the main unit in water.
5. Dry all parts thoroughly and reassemble before storing the air fryer in a safe, dry place.

Match a cooking drawer and its crisping tray to the Twin Drawer Air Fryer. Let both drawers cool before handling or cleaning, and avoid abrasive cleaners that damage the non-stick surfaces.

1. Turn the air fryer off, unplug it and let it cool completely before removing the Cooking Drawers and Crisping Trays; clean removable parts after every use so oil and food residue do not build up.
2. Wash the Cooking Drawers and Crisping Trays on the dishwasher top rack or with warm, soapy water; never use the sanitise cycle because the high heat can warp parts.
3. Use no abrasive or metal cleaning tools on the Cooking Drawers and Crisping Trays; they can damage the non-stick coating.
4. Wipe residue from the inner wall of the Air Fryer Base with a warm cotton cloth, then dry it with a dry cloth; wipe the exterior with a damp cloth. NEVER submerge the main unit in water.
5. Dry all parts thoroughly and reassemble before storing the air fryer in a safe, dry place.

Match both the cooking basket and the 3-in-1 reversible grill, pizza and crisping plate to the named air fryer capacity. Order genuine parts for that model, and let hot components cool before handling them.

1. Turn the air fryer off, unplug it and let it cool completely before removing the Cooking Basket and 3-in-1 Tray; clean removable parts after every use so oil and food residue do not build up.
2. Wash the Cooking Basket and 3-in-1 Tray on the dishwasher top rack or with warm, soapy water; never use the sanitise cycle because the high heat can warp parts.
3. Use no abrasive or metal cleaning tools or oven cleaner on the Cooking Basket and 3-in-1 Tray; they can damage the ceramic non-stick coating.
4. Wipe residue from the inner wall of the Air Fryer Base with a warm cotton cloth, then dry it with a dry cloth; wipe the exterior with a damp cloth. NEVER submerge the main unit in water.
5. With the appliance unplugged and fully cool, remove food particles from the heating element using a soft-to-medium-bristle brush if needed.
6. Dry all parts thoroughly and reassemble before storing the air fryer in a safe, dry place.

Identify whether you need a 4.5 L cooking basket, crisping tray or wire rack. Use genuine attachments designed for the Dual Stack 9L; do not substitute another air fryer’s tray or rack.

1. Turn the air fryer off, unplug it and let it cool completely before removing the Cooking Baskets, Crisping Trays and Wire Racks; clean removable parts after every use so oil and food residue do not build up.
2. Wash the Cooking Baskets, Crisping Trays and Wire Racks on the dishwasher top rack or with warm, soapy water; never use the sanitise cycle because the high heat can warp parts.
3. Use no abrasive or metal cleaning tools on the Cooking Baskets, Crisping Trays and Wire Racks; they can damage the ceramic non-stick coating.
4. Wipe residue from the inner wall of the Air Fryer Base with a warm cotton cloth, then dry it with a dry cloth; wipe the exterior with a damp cloth. NEVER submerge the main unit in water.
5. With the appliance unplugged and fully cool, remove food particles from the heating element using a soft-to-medium-bristle brush if needed.
6. Dry all parts thoroughly and reassemble before storing the air fryer in a safe, dry place.

1. For the NutriBullet Immersion Blender 800W NBI07110, match the 20 cm Blending Arm, Whisk and Whisk Holder, 600 ml Chopping Bowl and lid, S-blade, and 900 ml Cup and lid to the original attachment you need.
2. Use the exact Immersion Blender model when ordering; the attachments are model-specific, so do not choose a part solely because its socket looks similar.
3. For a replacement chopper, match the bowl, lid and S-blade together: the S-blade locks onto the centre pin and the lid connects to the Motor Body.
4. For a replacement whisk, check that you have the Whisk Holder as well as the wire whisk; the holder locks onto the Motor Body.
5. Keep the Blending Arm as a single part rather than trying to remove its internal blade.
6. Unplug and wait for all movement to stop before changing attachments; push the Motor Body into the Blending Arm or Whisk Holder and turn clockwise until it locks, then check it does not separate.

Next steps

1. For the chopper, press the S-blade onto the centre pin, load the bowl, turn its lid clockwise to lock, then push and turn the Motor Body clockwise into the lid.
2. Inspect the vessel for cracking, crazing, cloudiness or other damage and check that the blade or whisk rotates freely; stop using and replace a damaged detachable part. Buy a replacement whisk (Australia) or whisk (New Zealand).
3. Wash the Chopping Bowl, S-blade, Whisk and Blending Cup with warm soapy water or in the dishwasher.
4. Hand-clean the Blending Arm and Whisk Holder without soaking; wipe the Chopping Bowl Lid with a damp soapy cloth and keep these gear-containing parts out of the dishwasher.
5. Clean after use, avoid metal sponges, dry every part thoroughly and store safely in a dry place; wipe the Motor Body only. NEVER submerge the main unit in water.

1. Match a replacement Cooking Pot to the NutriBullet EveryGrain Cooker; the original pot is sized for 5 rice cups of raw grains or 10 rice cups cooked.
2. Use the EveryGrain Steaming Basket, Rice Spatula and Rice/Grain Measuring Scoop; the supplied scoop measures 180 ml, equivalent to 150 g of uncooked rice.
3. Identify the Sealing Panel, removable Steam Vent plug and Condensation Collector separately when describing a missing or damaged piece.
4. For an accessory or replacement part, use the EveryGrain Cooker name and the part name shown here when checking the official parts listing.
5. Turn off, unplug, detach the power cord and let the cooker cool before removing or fitting parts; use oven mitts for a hot Cooking Pot or Steaming Basket.
6. Cook only in the removable Cooking Pot or Steaming Basket, and never pour cooking liquid straight into the Cooker Base.
7. After assembly, close the Cooker Lid fully until it clicks; do not operate with the lid open.

Next steps

1. Hand-wash the Cooking Pot with warm soapy water to preserve its nonstick coating; do not use steel wool on the pot, Sealing Panel or other cooker parts.
2. Wash the Steaming Basket, Rice Spatula and Measuring Scoop in warm soapy water or the dishwasher.
3. For stuck food, soak the pot in warm soapy water; for stubborn residue, apply dishwashing liquid for a few minutes before soaking instead of scraping the coating.
4. Clean the Sealing Panel and Condensation Collector with a damp warm-soapy cloth after use; remove and rinse the Steam Vent plug and wipe inside the vent.
5. Once completely cool and unplugged, wipe the heating plate and Cooker Base with a damp cloth. NEVER submerge the main unit in water.
6. Store the cooker upright in a cool, dry place with the accessories and power cord together.

1. Match parts to the NutriBullet Food Processor NBP07100: the 1.7 L Work Bowl, Work Bowl Lid with Feed Chute, Dual-Size Food Pusher and Blade Adaptor form its processing assembly.
2. For the required cutting tool, identify the Chopping Blade, Dough Blade, Reversible Thin Slice/Shred Disc, Reversible Thick Slice/Shred Disc or Spiralizer Disc.
3. Use only the bowl and blade attachments intended for the NutriBullet Food Processor NBP07100.
4. Check each replacement for cracks or damage before fitting, and replace any damaged bowl or attachment rather than continuing to use it.
5. With power off and the base unplugged, lower the Blade Adaptor onto the Work Bowl centre shaft and push it firmly into place.
6. For a chopping or dough blade, hold the plastic centre and slide it down the adaptor to the bowl bottom; operate with only one blade fitted.
7. For a slice/shred disc, align its marks with the adaptor so it sits in the high working position; the lower position is for storage.

Next steps

1. For the Spiralizer Disc, align its notches with the tabs inside the Work Bowl and turn FRONT towards the front of the base, placing the spiralizer beneath the Feed Chute.
2. Turn the Work Bowl Lid clockwise until the arrows on the lid and handle align; insert the pusher and turn the complete bowl clockwise onto the base until it clicks.
3. Clean the removable adaptor, blades, discs, bowl, lid and pusher after use with warm soapy water or on the dishwasher top rack; avoid sanitise cycles, steel wool and hard scouring tools.
4. Wipe the unplugged Motor Base with a damp soapy cloth and brush the actuator area if needed. Do not dismantle the base.
5. For storage, put the Blade Adaptor, Chopping Blade and Dough Blade in the bowl, then lower the discs into the storage position with their marks unaligned.
6. Choose either both Slice/Shred Discs, or one Slice/Shred Disc and the Spiralizer Disc last; the full set will not store together.
7. Lock on the lid, put the pusher in the chute and tuck the cord under the base; never leave cutting edges exposed.

1. Use the NutriBullet Chill Pint Cup and Storage Lid, with the Chill Blade, Blade Shaft and Blade Block; use the Blade Cover when storing the exposed blade assembly.
2. For chilling, use the Pint Cup with the Chill Blade, Blade Shaft and Blade Block.
3. For that pre-freezing blend, use only cool or room-temperature, non-carbonated ingredients and blend for no longer than 30 seconds; stay below the Pint Cup MAX line.
4. For churning in the Chill, fit the Chill blade assembly and use a properly frozen recipe between MIN FILL and MAX FILL; do not run an empty cup or add loose ice, frozen fruit or dry hard ingredients.
5. Inspect the Pint Cup for cracks and the Blade Block for damage before each use; stop using and replace damaged detachable parts.
6. Fully retract the Blade Shaft so the Blade touches the top of the Blade Block; adjust it by the shaft, keeping fingers away from the cutting edges.

Next steps

1. Turn the Blade, Blade Block and Shaft assembly clockwise onto the Pint Cup until secure.
2. Keep the shaft dry inside and out, lower the inverted cup assembly shaft-first onto the Motor Base, align the cup tabs and base notches, then press down and turn clockwise to lock.
3. If CHECK BLADE appears, remove the cup assembly and reset the shaft until the Blade rests against the Blade Block before refitting it gently.
4. After the program ends and the blade stops, hold the release button while turning the cup counter-clockwise; lift it off and turn the Blade Block counter-clockwise to remove it.
5. Carry the assembly with both hands around the Pint Cup and Blade Block, never by the shaft; use the plastic grip after operation and cool a warm shaft under cool water before handling it.
6. After unplugging and waiting for all motion to stop, separate the Blade from the Blade Block before dishwashing.

Next steps

1. Hand-wash the Pint Cup, lid, Blade, Blade Block and Shaft in warm soapy water or place them on the dishwasher top rack; use no heat/sanitise cycle, steel wool or abrasive cleaner.
2. When hand-washing, clean the circular Blade Block opening and around the shaft with a sponge and dish soap after every use.
3. Wipe the base with a damp mild-soapy cloth and brush around the cup mounting area if needed; keep liquid away from the drive shaft and centre opening. Do not dishwash the base.
4. Dry all parts, store unplugged and fit the Blade Cover or attach the blade assembly to the Pint Cup.
5. If storing the covered Blade Block in the base, turn it counter-clockwise to disengage it before lifting it out; never leave an uncovered blade on the base.

1. Match the 1.3 L Work Bowl, Work Bowl Lid with Feed Chute, Food Pusher and Blade Adaptor to the NutriBullet Limitless Food Processor.
2. Choose the Limitless Chopping Blade or Reversible Slice/Shred Disc for the Work Bowl; use its Endless Chute and Slinger Disc for direct serving.
3. Use only genuine attachments specifically for the NutriBullet Limitless Food Processor NBP07300.
4. Inspect each part before use and stop using and replace any damaged detachable bowl, blade or disc.
5. With the base unplugged, hold the Chopping Blade by its plastic top and press it down the Blade Adaptor to the bowl bottom; alternatively fit the reversible disc by its centre grip with the required side up.
6. Turn the Work Bowl Lid clockwise until its markings line up with the handle, then turn the bowl clockwise onto the base until it clicks; use only one cutting tool during operation.

Next steps

1. For the Endless Chute, turn it clockwise onto the base, press the Slinger Disc into its bottom opening and fit the Slice/Shred Disc to the slinger stem before locking the lid.
2. Clean the removable bowl, lid, pusher, adaptor, blade, disc, chute and slinger after use with warm soapy water or on the dishwasher top rack up to 82°C.
3. Do not use heat/sanitise cycles, steel wool or hard scouring materials; never microwave an attachment.
4. Wipe the unplugged Motor Base with a damp soapy cloth and clean the actuator area with a small brush if needed.NEVER submerge the motor base in water. Do not dismantle the base.
5. Store the Chopping Blade on the adaptor with the disc above it, lock the lid and insert the pusher; store the Endless Chute and Slinger Disc separately with cutting edges covered.

1. Match the NutriBullet Baby Extractor Blade to its Short Cup or three-piece Batchbowl; keep the Batchbowl lid and vented lid cap together.
2. For the original Baby Short Cup, observe the 180 ml MAX blending line even though total capacity is 295 ml; use cooled food and liquid only.
3. For the original Baby Batchbowl, stay below its 475 ml MAX blending line even though total capacity is 945 ml; for warm ingredients, secure both the lid and vented lid cap.
4. Use the Stay-Fresh Resealable Lid, Date-Dial Storage Cups and Tip-Proof Tray for storage, and the Easy-Pop Freezer Tray with its lid for freezing.
5. Do not substitute attachments from another model; use the NutriBullet Baby model and original part name when selecting a replacement.
6. Inspect the Extractor Blade before every use and check its gasket is fully seated; do not remove or replace the gasket separately.

Next steps

1. Replace the complete Extractor Blade if the gasket is loose, damaged or removed, or if the blade is loose or damaged; the guide recommends blade replacement every six months. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
2. With the base unplugged, hand-tighten the Extractor Blade securely onto the Short Cup or Batchbowl before fitting the vessel to the base.
3. Stop using and replace a warped or damaged plastic accessory; do not expose Baby parts to boiling water, steam sterilisation or rapid extreme temperature changes.
4. Hand-wash the blade and leave its gasket fitted; keep the blade out of the dishwasher because hot water can damage the seal.
5. Wash cups and the Batchbowl on the dishwasher top rack or by hand in warm soapy water, then rinse.
6. For dried food in a cup, fill halfway with soapy water, attach the blade and blend for 10–20 seconds; stop, remove the cup safely, empty it and lightly scrub and rinse.

Next steps

1. Wipe the unplugged Motor Base inside and out with a damp cloth.
2. Use cold-water sterilisation tablets if sterilising accessories; do not microwave any Baby component or use hot-water or steam sterilisation.
3. For refrigerated food, remove the blade and fit a storage lid; fill Date-Dial Cups no more than two-thirds full and use the dial to record the preparation date.
4. Keep Date-Dial Cups out of the freezer; use the Easy-Pop Freezer Tray and lid for frozen portions, and do not use the Batchbowl for storage.
5. Use refrigerated food within two days and frozen purées within three months; never store an exposed blade on the Motor Base.

1. Match parts to the NutriBullet Baby Steam + Blend: the Work Bowl with handle, two-piece Work Bowl Lid, Blending Blade, Blade Holder, Sealing Ring and Water Reservoir Cap are distinct components.
2. Choose only attachments intended for the Baby Steam + Blend; do not fit a damaged Blending Blade or use the Work Bowl as a serving cup.
3. Keep the Blending Blade and Blade Holder together when identifying a replacement; the blade lifts vertically off its holder, while the holder is removed by rotating its bottom.
4. For steaming alone, the Blending Blade is optional; its drainage holes help keep excess water separate from steamed ingredients.
5. Unplug and let the appliance cool for at least ten minutes, with all moving parts stopped, before disassembly or changing attachments.
6. Lower the Blending Blade vertically onto the Blade Holder in the centre of the Work Bowl until secure.
7. Twist the Work Bowl Lid clockwise to close; align the black bowl arrow with the base Unlock icon, hold the base and turn the bowl counter-clockwise to lock.

Next steps

1. Turn the Water Reservoir Cap clockwise to seal it, filling the reservoir only when the appliance is cool and off.
2. Keep food below MAX and the pour-spout vents clear; do not put food or liquid inside the Work Bowl Lid assembly, and avoid sudden hot-to-cold temperature changes that can crack the bowl.
3. If assembly produces six warning beeps, unplug, remove and refit the Work Bowl and lid so both are correctly locked before retrying.
4. After cooling, turn the Work Bowl clockwise off the base, open the lid and lift the Blending Blade vertically using a mitt; do not touch its sharp edges.
5. To separate the lid for cleaning, turn the circular bottom grip counter-clockwise; remove trapped food or water and dry both pieces completely.
6. Wash the Work Bowl and lid before and after use with warm soapy water or on the dishwasher top shelf, then dry thoroughly.
7. Hand-wash the Blending Blade and Blade Holder with warm soapy water, clean inside the blade stem and dry fully; keep both out of the dishwasher.

Next steps

1. Clean cooled parts promptly with a cloth or soft brush; soak stubborn dried food on detachable parts in hot water for 30 minutes before cleaning.
2. Empty remaining water from the reservoir after use and wipe the Motor Base with a damp cloth.
3. For limescale, let the appliance cool and empty the reservoir; add 240 ml white vinegar, leave for at least 30 minutes and up to 24 hours, then discard and rinse with cool water.
4. After descaling, run and discard fresh-water cycles several times and finish with the initial cleaning cycle; repeat if residue remains, and descale about every four weeks or sooner when buildup appears.
5. To run the initial cleaning cycle, fill the reservoir to the 25-minute line, secure its cap, run a Steam cycle, then unplug, cool fully and discard remaining water.
6. Keep the assembled appliance and its parts together in a cool, dry, safe place when unplugged; store leftover food upright in a separate tightly covered container and use within 48 hours.

1. Unplug and wait for all movement to stop before removing the cup and blade from the motor base; hold the blade housing rather than its sharp edges.

1. Unplug and wait for all movement to stop before removing the cup and blade from the motor base; hold the blade housing rather than its sharp edges.

Use the included Tall Cup or an accessory cup specifically listed for Magic Bullet Blender Combo MBF07200AK.

1. Return the Power Control Knob to HOME, unplug and wait for the blade to stop.
2. For the Cup: twist it counter-clockwise to unlock it from the Motor Base, then turn it upright with the Cross Blade on top. Unscrew the Cross Blade before pouring out the contents.
3. For the Pitcher: twist it counter-clockwise and lift it off the Motor Base. Lift the lid tab to remove the lid, empty the contents, then unscrew the bottom Cross Blade in the direction shown on the Pitcher.
4. Keep your hands out of the Pitcher and away from the sharp edges when handling the Cross Blade.

• Inspect the sieve before every use and replace it if it is cracked, bent or damaged; do not keep using a damaged sieve or a visibly cracked protective cover.

1. Switch off, unplug and wait for the sieve and motor to stop; release both locking arms and remove the cover before gently lifting the sieve out of the juice bowl.

Use the chopping blade or reversible slice/shred disc with the 830 mL work bowl. Use the cross blade with a tall blending cup; these tools have different jobs and fittings.

1. Turn the control knob to OFF, unplug and wait until all moving parts stop.
2. For the Work Bowl: turn it counter-clockwise to unlock it from the Motor Base and place it on a clean, dry, flat surface. Turn the lid counter-clockwise to remove it.
3. Carefully lift the Chopping Blade off the bowl shaft, keeping your fingers away from the sharp edges. If using the slicing/shredding disc, lift it by its two large finger holes. Remove the cutting attachment before pouring food out of the Work Bowl.
4. For the Cup: turn the sealed Cup counter-clockwise to unlock it from the Motor Base, then turn it upright with the Cross Blade on top. Unscrew the Cross Blade before pouring out the contents.

Use attachments recommended or sold by the manufacturer for the Magic Bullet Air Fryer. Order the Fry Pot or Crisping Tray by its component name and exact model.

1. Turn the air fryer off, unplug it, set the timer to 0 and check that the orange indicator is dark; wait until the heating element has cooled completely.
2. Remove the Fry Pot from the Base, empty food scraps, then lift the Crisping Tray out by its centre handle; handle its sharp edges carefully.
3. Rinse the Fry Pot and Crisping Tray with hot, soapy water after each use to prevent food from drying onto the surfaces.
4. Wipe the outside of the Base with a clean, damp cloth. NEVER submerge the main unit in water or other liquid.
5. Store the air fryer parts together in a safe place where they cannot be damaged or cause harm.

Identify the attachment first: the cup uses the Rapid Extractor Blade, the processor uses its processor base and blade adapter with the chopping blade or reversible slice/shred disc, and the grinder uses its own blade and grinding cup.

• Periodically inspect the blades and stop using the Rapid Extractor Blade if they are damaged or cannot rotate freely.
• Check the gasket is present and undamaged; stop using the Rapid Extractor Blade if the gasket is missing or damaged and arrange a replacement. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Rinse the Rapid Extractor Blade with warm soapy water and use a small brush or sponge to remove residue; clean it immediately after use so food does not dry on it.
2. For stubborn food on an undamaged cup or blade, fill the cup to MAX with room-temperature water and one or two drops of dish soap, attach the blade and blend for 20–30 seconds; stop and unplug before scrubbing away the loosened food.
3. Keep the blade off the bottom dishwasher rack and never use a heat or sanitise cycle; do not boil the blade or put it in an oven, microwave, air fryer or stovetop pot.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

1. Inspect the processor Chopping Blade, Slice/Shred Disc and grinder blade for damage or wear as well as the Rapid Extractor Blade; do not operate with damaged attachments.

1. For the processor, wait for the blade or disc to stop, unplug, turn the Work Bowl Lid anticlockwise and lift it off, then remove the Work Bowl and Processor Base; lift the blade or disc by its central plastic knob, never by tipping it into your hand.

1. Wash processor blades and discs by hand with soap and water or on the top dishwasher rack; hand-wash the Processor Base and Blade Adapter and never use the heat or sanitise cycle.
2. Soak stubborn food on processor blades or discs in room-temperature water with one or two drops of dish soap for 20–30 seconds, then scrub away the loosened residue.

1. Store the Chopping Blade and Slice/Shred Disc inside the Work Bowl; put the disc in its lower storage position without aligning its marks with the Blade Adapter, then attach the lid.

1. Separate the grinder blade from the Grinding Cup after unplugging; wash both by hand or on the top dishwasher rack without the heat or sanitise cycle, then keep the grinder in a clean, cool, dry place.

1. Never use the grinder attachment as a storage container or leave an exposed grinder blade on the base.

Cup capacity alone does not identify its fit.

The listed 600 Mega Pack product codes include an extractor blade and an additional milling blade for dry ingredients, with 500 mL and 700 mL blending cups. Identify which blade and cup you need before requesting an exact-pack replacement.

1. Unplug the motor base, wait until every moving part has stopped, then remove the cup and extractor blade assembly from the base before separating the parts.

1. Securely screw the blade base onto the cup before placing the assembly on the motor base; the blade should sit securely without leaking.

Order genuine parts specifically designed for the Turbo and give the full model when ordering. Do not substitute an aftermarket blade or cup.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

Order genuine parts specifically designed for the Turbo and give the full model when ordering. Do not substitute an aftermarket blade or cup.

1. Switch off and unplug the motor base, wait for the blades to stop, then remove the cup and blade assembly; never pull the cup away while the blade is moving.

1. Securely tighten the Rapid Extractor Blade onto the cup before use; if leaking starts, stop blending and wait for the motor to stop before removing the assembly.

Each NutriBullet model has its own blade and cup, designed specifically for that model. Using the wrong parts and accessories can lead to increased wear and tear.

• For NBJ07150, stop using the juicer if extreme vibration occurs and arrange service through our team; leave maintenance beyond cleaning to an authorised electrician.

For Juicer 800W 2.0 NBJ07150, turn the No-Drip Spout upwards before removing the juice pitcher, then remove the spout for washing and rinse it with water; keep the removable spout out of the dishwasher.