Yes, make almond or cashew milk with the NutriBullet Triple Prep System’s Blending Pitcher and Nutmilk program; the guide says these recipes do not need straining.
For recipe ideas, browse the official NutriBullet recipe libraries for Australia and New Zealand. Choose recipes for your exact machine and attachment, and follow your user guide’s hot-ingredient and ice limits.
NutriBullet Triple Prep System
Yes, the Nutmilk program in the Blending Pitcher makes almond or cashew milk using the matching recipe.
How can I prepare nut milk and care for the pitcher?
-
Prepare and run the Nutmilk program.
- Before first use, wash the Blending Pitcher and Pitcher Lid with soap and water, or in the dishwasher without a heat or sanitise cycle. Avoid the sharp integrated blades; wipe the unplugged Motor Base with a damp soapy cloth, then dry it.
- Use the almond or cashew Nutmilk recipe supplied with your Triple Prep System for ingredient amounts and preparation. Do not substitute a food-processor or single-serve Cup program.
- Put the Motor Base on a clean, dry, level surface and add the recipe ingredients to the Blending Pitcher without exceeding MAX.
- Press the Pitcher Lid down securely with the pour spout closed. Press the Vented Lid Cap firmly into its opening and twist it to lock.
- Place the Pitcher on the unplugged Motor Base and twist clockwise until it clicks into place.
- Plug in the base and use Power if needed to illuminate the control panel. Choose Nutmilk from the pitcher menu; the timer counts down during the preset cycle.
- If ingredients need help moving, use only the supplied Tamper through the Vented Lid Cap opening. Never open the Pitcher Lid or pour spout during blending, and replace the cap when finished adding ingredients.
- When blending finishes, switch off, unplug and wait for the blades to stop. Twist the Pitcher counter-clockwise until it clicks unlocked, then lift it off.
Next steps
- Open the latch above the pour spout to serve. To remove the whole lid, push up with your thumb on the tab above the handle.
- If the display has dimmed after the program or after 60 seconds idle, tap a program or speed to wake it. Press Power in Sleep Mode to turn it off.
-
Clean and store the pitcher afterwards.
- To loosen stuck nut residue, fill the Pitcher halfway with water and add one or two drops of dish soap. With the lid secured, blend for 20–30 seconds, then switch off, unplug and scrub away the loosened residue with soap and water.
- Wash the Pitcher and Lid by hand or in the dishwasher without heat or sanitising. Wash the Tamper by hand with soap and water.
- NEVER submerge the motor base in water. Keep the Motor Base's ventilation openings clear. Do not sanitise parts in boiling water, an oven, an air fryer, a microwave or a stovetop pot.
- Check the Pitcher for cracks, cloudiness, warping or other damage; stop using a damaged Pitcher and replace it with a genuine Triple Prep part. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
- Store the Triple Prep System upright with nothing on top and put its accessories in a safe place.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: Read the NutriBullet Triple Prep System user guide (PDF)