Skip to main content

How can we help?

How do I clean a spill in the base of my personal blender?

  • Updated

Wipe accessible spills from the unplugged Motor Base by hand with a damp cloth.

Is liquid getting into, or coming from inside, the base?

If liquid has entered the motor base or electrical housing, or dark or oily-looking liquid is coming from inside it, stop using it, unplug it only if it is safe to do so, and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase). Keep a rechargeable appliance disconnected from its charger; do not open the housing or run another cycle to test it.

If a leak continues after the checks, or the source is unclear, leave the appliance off and use the same help link. Include the full model name and where the liquid appeared.

If a step above directs you to our team, or you need help with an unresolved issue in this article, see our warranty article.

NutriBullet Ultra 1200

Clean accessible spills from the unplugged NutriBullet Ultra 1200 Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Ultra 1200, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Ultra 1200 Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Ultra 1200 Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Ultra 1200 cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

NutriBullet 900 Series

Clean accessible spills from the unplugged NutriBullet 900 Series Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 900 Series, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 900 Series Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 900 Series extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 900 Series cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 900 Essentials Set (AU and NZ)

Clean accessible spills from the unplugged NutriBullet 900 Essentials Set NB9-0807DG (AU and NZ) Motor Base by hand with a cloth dampened with warm soapy water.

  1. Unplug the motor base and wait until every moving part has stopped before handling or cleaning it.
  2. Wipe the accessible motor base with a cloth dampened with warm soapy water. NEVER submerge the motor base in water.
  3. Use a small brush if needed to clean sticky debris around the white actuator tabs inside the unplugged base.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

What if the cup still will not engage?
  1. Check all three tabs on the cup. Stop using the cup and replace it if a tab is broken, damaged or missing.

If the blender malfunctions, has been dropped or is damaged, stop using it.

NutriBullet 900 Mega Pack (AU and NZ)

Clean accessible spills from the unplugged NutriBullet 900 Mega Pack NB9-1107AK (AU and NZ) Motor Base by hand with a cloth dampened with warm soapy water.

  1. Unplug the motor base and wait until every moving part has stopped before handling or cleaning it.
  2. Wipe the accessible motor base with a cloth dampened with warm soapy water. NEVER submerge the motor base in water.
  3. Use a small brush if needed to clean sticky debris around the white actuator tabs inside the unplugged base.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

What if the cup still will not engage?
  1. Check all three tabs on the cup. Stop using the cup and replace it if a tab is broken, damaged or missing.

If the blender malfunctions, has been dropped or is damaged, stop using it.

NutriBullet 600 Series

Clean accessible spills from the unplugged NutriBullet 600 Series Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 600 Series, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 600 Series Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 600 Series extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 600 Series cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

For stubborn residue in the grooves or on the actuator tabs of the unplugged base, use a cotton swab or toothbrush with a 50/50 mix of warm water and white vinegar (about 20ml each).

Switch off at the wall outlet and unplug the NutriBullet 600 Series, then wait until every moving part has stopped.

Give the cup an extra half turn onto the blade, then remove the cup and extractor blade together.

NutriBullet Ultra 1000 / Ultra 1000 Premium

Clean accessible spills from the unplugged NutriBullet Ultra 1000 / Ultra 1000 Premium Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Ultra 1000 / Ultra 1000 Premium, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Ultra 1000 / Ultra 1000 Premium Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Ultra 1000 / Ultra 1000 Premium Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Ultra 1000 / Ultra 1000 Premium cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

NutriBullet Select 1200 / 2.0 Select 1200

Clean accessible spills from the unplugged NutriBullet Select 1200 / 2.0 Select 1200 Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Select 1200 / 2.0 Select 1200, then wait until every moving part has stopped.
  2. Remove the cup and easy-twist extractor blade together or unlock and remove the pitcher. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Select 1200 / 2.0 Select 1200 Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade, pitcher and lid separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Select 1200 / 2.0 Select 1200 easy-twist extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet Select 1200 / 2.0 Select 1200 cup or pitcher, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Pro+ 1200 / Pro Plus 1200

Clean accessible spills from the unplugged NutriBullet Pro+ 1200 / Pro Plus 1200 Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Pro+ 1200 / Pro Plus 1200, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Pro+ 1200 / Pro Plus 1200 Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Pro+ 1200 / Pro Plus 1200 extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet Pro+ 1200 / Pro Plus 1200 cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 2.0 Pro 1000 โ€” New Zealand

Clean accessible spills from the unplugged NutriBullet 2.0 Pro 1000 NB07100-1008DG โ€” New Zealand Motor Base by hand with a cloth or sponge dampened with warm soapy water.

Clean a spill on the NutriBullet 2.0 Pro 1000 base with a cloth dampened with warm soapy water after unplugging it and removing the cup and blade. These instructions apply to NB07100-1008DG in New Zealand.

  1. Switch off and unplug the NutriBullet 2.0 Pro 1000 NB07100-1008DG, then wait until every moving part has stopped.
  2. Remove the cup and easy-twist extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 2.0 Pro 1000 NB07100-1008DG Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.
Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 2.0 Pro 1000 NB07100-1008DG easy-twist extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 2.0 Pro 1000 NB07100-1008DG cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 1000 Series

Clean accessible spills from the unplugged NutriBullet 1000 Series Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 1000 Series, then wait until every moving part has stopped.
  2. Remove the cup and Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 1000 Series Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 1000 Series Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 1000 Series cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Turbo 1000

Clean accessible spills from the unplugged NutriBullet Turbo 1000 Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Turbo 1000, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Turbo 1000 Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Turbo 1000 Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again.
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Turbo 1000 cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

NutriBullet 1000 Mega Pack / 1000 Series Mega Pack

Clean accessible spills from the unplugged NutriBullet 1000 Mega Pack / 1000 Series Mega Pack (N10-1107AK) Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. For product code N10-1107AK. Switch off and unplug the NutriBullet 1000 Mega Pack / 1000 Series Mega Pack, then wait until every moving part has stopped.
  2. Remove the cup and Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 1000 Mega Pack / 1000 Series Mega Pack Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 1000 Mega Pack / 1000 Series Mega Pack Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it.
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 1000 Mega Pack / 1000 Series Mega Pack cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 1200 Series / 12 Piece

Clean accessible spills from the unplugged NutriBullet 1200 Series / 12 Piece Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 1200 Series / 12 Piece, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 1200 Series / 12 Piece Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 1200 Series / 12 Piece extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it.
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 1200 Series / 12 Piece cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 1200 Series / 10 Piece

Clean accessible spills from the unplugged NutriBullet 1200 Series / 10 Piece Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 1200 Series / 10 Piece, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 1200 Series / 10 Piece Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 1200 Series / 10 Piece extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 1200 Series / 10 Piece cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 2.0 Pro 1200

Clean accessible spills from the unplugged NutriBullet 2.0 Pro 1200 Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 2.0 Pro 1200, then wait until every moving part has stopped.
  2. Remove the cup and easy-twist extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 2.0 Pro 1200 Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 2.0 Pro 1200 easy-twist extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 2.0 Pro 1200 cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 500 Series / 4 Piece

Clean accessible spills from the unplugged NutriBullet 500 Series / 4 Piece Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 500 Series / 4 Piece, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 500 Series / 4 Piece Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 500 Series / 4 Piece extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 500 Series / 4 Piece cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet 1000 Essentials McLaren

Keep the NutriBullet 1000 Essentials McLaren off and obtain the cleaning instructions for its exact product code before taking it apart.

  1. Have product code N10-0807GO-MC ready when asking for help, along with the model information printed on the appliance label. Do not open the housing.
  2. Do not run a cleaning blend or restart the appliance to test it. NEVER submerge the motor base in water.

NutriBullet 700 Series

Clean accessible spills from the unplugged NutriBullet 700 Series Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 700 Series, then wait until every moving part has stopped.
  2. Remove the cup and Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 700 Series Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 700 Series Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it.
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 700 Series cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Select 1000 / Select 1000 with pitcher

Clean accessible spills from the unplugged NutriBullet Select 1000 / Select 1000 with pitcher Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Select 1000 / Select 1000 with pitcher, then wait until every moving part has stopped.
  2. Remove the cool NutriBullet Select 1000 / Select 1000 with pitcher cup and easy-twist extractor blade together, turn the cup upright and unscrew the blade.
  3. Wipe the accessible NutriBullet Select 1000 / Select 1000 with pitcher Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Select 1000 / Select 1000 with pitcher easy-twist extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is food dried onto the cup?
  • For dried food in the NutriBullet Select 1000 / Select 1000 with pitcher cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Pro+ Matte Black

Keep the NutriBullet Pro+ Matte Black off and obtain the cleaning instructions for its exact product code before taking it apart. NEVER submerge the motor base in water.

  1. Have product code N12-1207MK-C ready when asking for help, along with the model information printed on the appliance label. Do not open the housing.
  2. Take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase) and explain whether food is on an accessible surface or liquid has entered the base. Do not run another blend to test it.

NutriBullet 600 Essentials Kit

Clean accessible spills from the unplugged NutriBullet 600 Essentials Kit Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 600 Essentials Kit, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 600 Essentials Kit Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 600 Essentials Kit extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it.
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 600 Essentials Kit cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Ultra 1200 McLaren / Club Pack

Clean accessible spills from the unplugged NutriBullet Ultra 1200 McLaren / Club Pack motor base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Ultra 1200 McLaren / Club Pack, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Ultra 1200 McLaren / Club Pack Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Ultra 1200 McLaren / Club Pack Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again.
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Ultra 1200 McLaren / Club Pack cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

NutriBullet Ultra 1200 Premium

Clean accessible spills from the unplugged NutriBullet Ultra 1200 Premium Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Ultra 1200 Premium, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Ultra 1200 Premium Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Ultra 1200 Premium Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again. Buy a replacement extractor blade (New Zealand).
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Ultra 1200 Premium cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

Magic Bullet To Go 200W

Clean accessible spills from the unplugged Magic Bullet To Go 200W Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the Magic Bullet To Go 200W, then wait until every moving part has stopped.
  2. Remove the cup and Cross Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible Magic Bullet To Go 200W Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.
Is food stuck to the detached blade?
  • Inspect the detached Magic Bullet To Go 200W Cross Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it. Buy a replacement cross blade (Australia) or cross blade (New Zealand).
Is food dried onto the cup or pitcher?
  • For dried food in the Magic Bullet To Go 200W cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Ultra Plus+ Compact Kitchen System

Unplug the appliance and wait for all movement to stop before cleaning. Wipe spills from the NutriBullet Ultra Plus+ Compact Kitchen System Motor Base with a damp sponge or cloth and dry it with a clean cloth; hand-wash the Processor Base and Blade Adapter, which must not go in the dishwasher.

  1. Power off and unplug the NutriBullet Ultra Plus+ Compact Kitchen System and wait until every blade or disc has stopped. For the blending cup, remove the cup and Rapid Extractor Blade assembly from the base; stand the cup upright before unscrewing the blade.
  2. For the Processor Attachment, turn the Work Bowl Lid counterclockwise and lift it off first. Then turn the Work Bowl and Processor Base counterclockwise off the Motor Base. Lift the blade or disc by its central plastic knob before removing food with a spoon or spatula.
  3. Separate the processor Work Bowl from its Processor Base by holding the base underneath and turning the bowl counterclockwise. Wash the blade, disc, Work Bowl and lid by hand with a sponge or cloth, soap and water, or on the top dishwasher rack without heat/sanitise. Hand-wash the Processor Base and Blade Adapter.
  4. For the Coffee & Dry Spice Grinder, disengage it from the Motor Base and separate the Grinding Cup and Grinder Blade. Hand-wash with a sponge or cloth, soap and water, or use the top dishwasher rack without heat/sanitise.
  5. Rinse the Rapid Extractor Blade with warm soapy water and use a small brush or sponge to lift residue from it. Wipe the Motor Base exterior gently with a damp sponge or cloth and dry with a clean cloth; do not open the housing. NEVER submerge the motor base in water.
  6. Inspect cleaned parts for cracks, warping, cloudiness or a damaged blade gasket before reassembly. Replace damaged detachable parts; secure the Rapid Extractor Blade tightly on the cup, or reassemble the chosen attachment in the reverse of its removal order. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Are ingredients stuck to the Cup or Rapid Extractor Blade?
  • For an intact NutriBullet Ultra Plus+ Compact Kitchen System cup and blade with a clean, dry base, add room-temperature water up to MAX and one or two drops of dish soap. Twist the blade on securely and blend for 20โ€“30 seconds.
  • Unplug, remove and open the assembly, then scrub remaining residue away with soap and water. A leaking or damaged assembly must be hand-washed and repaired by replacing the affected detachable part before any cleaning blend.
Is food packed into the Processor Feed Chute?
  • Power off and unplug the NutriBullet Ultra Plus+ Compact Kitchen System, then wait until the disc or blade stops. Remove the lid before attempting to unlock the Work Bowl assembly.
  • Clear the Feed Chute and remove accumulated food from the bowl after lifting out the blade or disc by its plastic centre. Reassemble with the correct disc side facing up and its hash marks aligned with the Blade Adapter; the disc should sit nearly flush with the bowl rim. Feed the next batch slowly.
Is stubborn residue stuck to a processor blade or disc?
  • Remove the NutriBullet Ultra Plus+ Compact Kitchen System blade or disc only after shutdown and disassembly, holding the plastic centre.
  • Immerse the detached blade or disc in room-temperature water with one or two drops of dish soap for 20โ€“30 seconds, then scrub away loosened residue without touching cutting edges. Hand-wash the Processor Base and Blade Adapter; they must not go in the dishwasher.
Is dry food trapped in the Coffee & Dry Spice Grinder?
  • Unplug the NutriBullet Ultra Plus+ Compact Kitchen System and disengage the Grinder from the Motor Base. Separate the Grinding Cup and Grinder Blade, keeping hands clear of cutting edges.
  • Wash both using a sponge or cloth, soap and water, or place them on the top dishwasher rack without the heat/sanitise cycle. Clean the Motor Base exterior with a damp cloth and check for damage before refitting the attachment.

NutriBullet 600 Mega Pack

Clean accessible spills from the unplugged NutriBullet 600 Mega Pack Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet 600 Mega Pack, then wait until every moving part has stopped.
  2. Remove the cup and extractor blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet 600 Mega Pack Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; leave the fixed base liners and components in place.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet 600 Mega Pack extractor blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use the guide-approved hand-washing method to clean the accessible blade surfaces, then rinse and dry the assembly completely.
  • Leave the blade gasket in place. If it becomes loose or damaged, replace the whole blade assembly before refitting it.
Is food dried onto the cup or pitcher?
  • For dried food in the NutriBullet 600 Mega Pack cup, remove the vessel from the base and wash it with soap and water.
  • Use a dish brush or sponge to loosen the remaining deposits and rinse away the residue. A washed rim and fitting area should be clear of stuck food before the blade or lid is refitted.
  • Inspect the cleaned vessel for cracks or damaged fitting tabs; replace a damaged detachable part rather than continuing to use it.

NutriBullet Turbo 1000 Deluxe Set

Clean accessible spills from the unplugged NutriBullet Turbo 1000 Deluxe Set Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Turbo 1000 Deluxe Set, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Turbo 1000 Deluxe Set Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Turbo 1000 Deluxe Set Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again.
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Turbo 1000 Deluxe Set cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

NutriBullet Turbo Ultimate Pack

Clean accessible spills from the unplugged NutriBullet Turbo Ultimate Pack Motor Base by hand with a cloth or sponge dampened with warm soapy water.

  1. Switch off and unplug the NutriBullet Turbo Ultimate Pack, then wait until every moving part has stopped.
  2. Remove the cup and Rapid Extractor Blade together. Empty the cool vessel and separate its detachable parts for washing.
  3. Wipe the accessible NutriBullet Turbo Ultimate Pack Motor Base surfaces with a sponge or cloth dampened with warm soapy water. NEVER submerge the motor base in water. Do not remove the motor base's housing parts.
  4. Use a small brush to loosen sticky debris around the actuator area while the base remains unplugged; keep the Motor Base intact.
  5. Wash the detachable cup and blade separately with soap and water, keeping fingers away from the cutting edges. Rinse the washable parts and dry them before reassembly.
  6. Check that the accessible base is free of food and moisture before refitting the clean parts. If liquid has entered the housing, follow the liquid-in-base advice in this article instead of restarting.

This video shows how to clean the motor base: unplug it, wipe it inside and out with a damp sponge, use a small brush dipped in warm soapy water, and let it dry before use.

Is food stuck to the detached blade?
  • Inspect the detached NutriBullet Turbo Ultimate Pack Rapid Extractor Blade for food around the cutting area. Keep hands clear of the sharp edges while cleaning.
  • Use a small brush or sponge with soapy water to dislodge residue from the blade, then rinse and dry the assembly completely.
  • Keep the blade intact during cleaning; replace a damaged blade assembly before fitting it to the vessel again.
Is food stuck to the cup or pitcher?
  • Remove the NutriBullet Turbo Ultimate Pack cup from the base before hand-washing it with soap and water.
  • Use a dish brush or sponge to loosen food on accessible surfaces; keep fingers away from blade edges and rinse away all residue.
  • Check that the cleaned cup is sound before refitting it. Replace damaged detachable parts before further use.

Still need help? Chat with us and give us your model name and product code.

The full steps for this model are in its user guide: NutriBullet Ultra 1200 user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 900 Series user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 900 Essentials Set NB9-0807DG user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 900 Mega Pack NB9-1107AK user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 600 Series user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Ultra 1000 / Ultra 1000 Premium user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Select 1200 / 2.0 Select 1200 user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Pro+ 1200 / Pro Plus 1200 user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 2.0 Pro 1000 NB07100-1008DG user guide (NZ, PDF)

The full steps for this model are in its user guide: NutriBullet 1000 Series user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Turbo 1000 user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 1000 Mega Pack / 1000 Series Mega Pack user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 1200 Series / 12 Piece user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 1200 Series / 10 Piece user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 500 Series / 4 Piece user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 700 Series user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Select 1000 / Select 1000 with pitcher user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 600 Essentials Kit user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Ultra 1200 McLaren / Club Pack user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Ultra 1200 Premium user guide (PDF)

The full steps for this model are in its user guide: Magic Bullet To Go 200W user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Ultra Plus+ Compact Kitchen System user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 600 Mega Pack user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Turbo 1000 Deluxe Set user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Turbo Ultimate Pack user guide (PDF)

Related articles

Contact us