No, the SOUPS program blends the ingredients but does not heat them; heat the soup separately.
The SOUPS program is available only with the pitcher and can prepare smooth, ready-to-heat soup or chilled gazpacho.
NutriBullet Smart Touch Blender Combo
No, the NutriBullet Smart Touch Blender Combo SOUPS program blends soup ingredients without heating them; warm the soup separately.
- Prepare the ingredients in the pitcher. If they are already hot, use this vented pitcher only. Fill below the higher solids MAX and lower liquid MAX lines, press the pitcher lid firmly down to lock it, and press and twist the lid cap into place. Keep clear of steam and splashes.
- Place the pitcher onto the motor base and twist clockwise until it clicks. Plug in and press POWER; the control panel should light when both pitcher and lid are locked.
- Select SOUPS. The program icon lights, other controls disappear and the timer counts down; programmed pulses and speed changes are part of the cycle.
- To pause, press SOUPS once; the motor and timer pause. Press SOUPS again to resume, or POWER once to end the program and return to the main panel.
- At the completion beep, wait for the blade to stop. Press POWER until the display turns off completely, unplug, twist the pitcher counterclockwise and lift it from the base; open the lid carefully to avoid any hot steam or splashing.
For a chilled soup, prepare the ingredients for the pitcher; for soup to serve hot, transfer the blended soup to a suitable cooking vessel and heat it separately.
What if SOUPS is missing from the controls?
If SOUPS is absent, check the fitted vessel: it is not a cup program. Use the pitcher with its lid locked; never put hot or carbonated ingredients into a sealed cup.
What if I want to blend hot soup manually?
For a manual hot blend, start on LOW and increase only once the mixture is level and no longer splashing. Do not use PULSE with hot ingredients or add food through the cap opening during a hot blend.
What if the motor stops and the display flashes?
If the motor stops with power and timer flashing, unplug and cool for at least 15 minutes before reconnecting. Keep continuous motor operation within the guide’s one-minute limit.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: Read the NutriBullet Smart Touch Blender Combo user guide (PDF)