Magic Bullet To Go 200W

Press and release the fitted cup for short bursts or push and twist clockwise for continuous operation; the guide describes manual cup control rather than buttons or automatic programs.

1. Use cool ingredients with liquid below the Cup’s MAX line and hand-tighten the Cross Blade. Check its gasket is seated and undamaged, then align the cup tabs with the Motor Base tabs.
2. Press the cup down to run the motor; release downward pressure to stop. For short bursts, press and release the cup rather than locking it on.
3. For continuous operation, press down and turn the cup gently clockwise until its tabs lock under the base lip. Stay with the blender while it runs, and never run it continuously for more than 1 minute.
4. Turn the cup anticlockwise to release lock-on mode; wait for complete blade stillness before removing the cup/blade assembly. Unplug before dismantling or cleaning.

Magic Bullet To Go 200W: model number MB1001B, MB1001S; product code (SKU) MBR-0307, MBR-0307AK.

Magic Bullet Blender Combo

Turn the dial to LOW or HIGH to start its preset speed cycle, or hold PULSE with the dial at HOME for short bursts; return the dial to HOME when finished.

1. Start with the dial centred at HOME, where the blender is stopped. For cup blending, hand-tighten the Cross Blade onto a cool, non-fizzy mixture below MAX, invert and lock the cup clockwise onto the base. For pitcher blending, secure the blade, lid and vented cap, then lock the pitcher clockwise until it clicks and connect power.
2. Turn the dial left to LOW to start the low-speed cycle.
3. Turn the dial right to HIGH to start the high-speed cycle.
4. With the dial centred at HOME, press and hold its PULSE button for short bursts; release the button to stop.
5. Return the dial to HOME when blending finishes. Always return to HOME before starting another HIGH, LOW or PULSE cycle; do not leave the dial pointing at the previous speed.
6. Wait until the blades stop, then turn the cup or pitcher anticlockwise and lift it off the base. Set a cup upright before unscrewing the blade; on the pitcher lift the lid tab to release the lid.
7. After 2 consecutive cup cycles, wait 10–15 minutes before starting another. If the cup is warm, do not open it: let its contents cool for at least 30 minutes, and do not force the blade off.

Use LOW for softer ingredients, such as smoothies, protein drinks, milkshakes, sauces, batters, dressings and condiments.

Use HIGH for hard ingredients, such as frozen fruit smoothies, frozen coffee or cocktails, root vegetable soups and puréed sauces. Blend hot foods only in the pitcher, starting on LOW before moving to HIGH.

Use PULSE for chunky salsas, dips and dressings, and to chop herbs, vegetables and other ingredients.

Magic Bullet Blender Combo: model number MBF-100; product code (SKU) MBF07200AK.

Magic Bullet Mini Juicer

Press the Power Button down to ON to start juicing and up to OFF to stop; the guide describes this on/off control rather than selectable automatic programs.

1. Keep the Power Button up at OFF while assembling or connecting power. Check both Locking Arms are upright and locked, the Pulp Bin sits at the rear, the Spout Cap points down and the Juice Cup is directly below it.
2. Plug in and press the Power Button down to ON; the Sieve starts spinning. Start the motor before adding produce.
3. Feed washed and prepared produce gradually through the chute, using the Food Pusher gently. Do not push with your fingers or a utensil, or use excessive force.
4. Stop and empty the Pulp Bin when full and empty the Juice Cup at MAX before continuing. Juice should flow from the spout while separated pulp collects in the bin.
5. Press the button up to OFF. Wait for the Sieve to stop fully before removing the Juice Cup or unlocking the Locking Arms; unplug before disassembly.
6. Tilt the Juice Cup slightly forward to free its lid opening from the spout and slide the cup out. Turn the Spout Cap upwards to retain residual drips and leave the Power Button at OFF after use.

Magic Bullet Mini Juicer: model number MBJ-100; product code (SKU) MBJ07110, MBJ07110K.

Magic Bullet Kitchen Express 250W

Turn the Power Control Knob to ON for continuous operation, hold PULSE for short bursts and select OFF to stop; the guide describes these manual controls rather than automatic programs.

1. For the processor, fit the blade and food, lock the lid clockwise, then lock the bowl clockwise onto the base. For blending, fill the cup below MAX, tighten the Cross Blade and lock the inverted cup clockwise onto the base; neither attachment runs unless securely locked.
2. Turn the Power Control Knob to ON for continuous blending or food processing. It keeps running until you select OFF; never run the cup or bowl continuously for more than 1 minute.
3. Hold the knob at PULSE for short bursts and release it to stop; the knob returns automatically to OFF. Use bursts to control how finely food is processed.
4. Turn the knob to OFF and wait until all blades stop. Disconnect power before changing the working attachment.
5. Turn the bowl or cup anticlockwise to unlock it from the base. Unlock the bowl lid anticlockwise and remove the Chopping Blade before pouring out food; set a blending cup upright before untwisting its Cross Blade.

Magic Bullet Kitchen Express 250W: model number MB3001; product code (SKU) MB07200.

Magic Bullet Air Fryer 2.5L

Set the Temperature Dial and turn the Timer to begin cooking, then let it reach 0 or turn it back to stop; the guide uses these two manual dials rather than buttons or preset programs.

1. Place the air fryer on a clean, dry, flat, solid surface and seat the Fry Pot completely inside the Base before plugging in; it will not operate if the pot is incorrectly fitted. NEVER submerge the main unit in water.
2. Turn the Temperature Dial to its highest setting and run for 3 minutes to preheat. For any timer setting under 10 minutes, first turn the Timer clockwise past 10, then anticlockwise to your chosen time.
3. Support the Base with one hand and pull out the Fry Pot by its handle with the other. Seat the Crisping Tray securely and level at the bottom, add food with about 50 mm clear above it, then refit the pot until it clicks and sits flush with the Base.
4. Turn the Temperature Dial to your recipe’s setting; the top of the Base has a quick guide to cooking times and temperatures.
5. Turn the Timer clockwise to the required cooking time; cooking begins. The left green light indicates heating and turns off at the set temperature; the right orange light stays on while the timer runs.
6. The timer automatically stops the air fryer at 0 and the orange light turns off. To shorten cooking, turn the Timer anticlockwise; turn it all the way back to stop manually.
7. For recipes that require turning, stop cooking before removing the Fry Pot; hold its handle firmly to prevent spills and turn food with a utensil. At completion, wait a few seconds until frying sounds stop, then support the Base and remove the pot by its handle. Keep clear of steam, use insulated oven gloves for hot parts and lift food out with a utensil.

Magic Bullet Air Fryer 2.5L: product code (SKU) MBA07100.