Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Twist the cup/blade assembly clockwise until it clicks securely onto the base; the control panel lights up only when the assembly is locked. When off, the panel is unlit.

Touch the illuminated Solid Circle to start the automatic 30-second blending program. Let the program stop before unlocking the cup.

Hold the Dashed Circle to pulse-blend and release it to stop. Tap for short intermittent pulses or hold for a longer pulse until the desired consistency is reached.

Do not blend continuously for more than one minute. After multiple extraction cycles, let the contents settle for 10–15 minutes. Leave a hot or warm cup closed until completely cool.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The NB07500-1008 Premium pack includes a 1000 W motor base, Rapid Extractor Blade, a 900 mL Tritan Renew cup, a 700 mL Tritan Renew cup, a 700 mL Tritan Renew handled cup and three premium flip-top lids.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Twist the cup/blade assembly clockwise until it clicks securely onto the base; the control panel lights up only when the assembly is locked. When off, the panel is unlit.

Touch the illuminated Solid Circle to start the automatic 30-second blending program. Let the program stop before unlocking the cup.

Hold the Dashed Circle to pulse-blend and release it to stop. Tap for short intermittent pulses or hold for a longer pulse until the desired consistency is reached.

Do not blend continuously for more than one minute. After multiple extraction cycles, let the contents settle for 10–15 minutes. Leave a hot or warm cup closed until completely cool.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The NB07200-1210DG guide shows a motor base, easy-twist extractor blade, 900 mL pitcher, pitcher lid with vented lid cap, tamper, 900 mL cup, 700 mL handled cup, 590 mL travel cup and three To-Go Lids. Fit the supplied vessels to their matching base and blade; use their marked MAX lines when filling.

Press POWER to enable the controls; the button lights up. Press it to stop the blend, then power down fully and unplug when finished.

Press LOW for thin batter, gravy, marinades, eggs, cooked foods and uncooked fruit. Cool ingredients before blending them in a sealed cup. Press LOW again or POWER to stop.

Press HIGH for thick mixtures and frozen fruit or vegetables, with liquid added. Press HIGH again or POWER to stop.

Press EXTRACT to make smoothies with whole fruit, vegetables and ice plus liquid. The preset ends automatically; press EXTRACT again or POWER to stop it early.

Press and release PULSE for controlled chopping and processing. Holding it runs the motor until release. Do not pulse hot ingredients.

With a cup attached, LOW and HIGH stop automatically after 60 seconds. With the pitcher attached, the selected speed continues until you press the speed button again or POWER. Wait until the blades stop before unlocking the vessel.

The pitcher lid closes the pitcher; its vented lid cap releases steam while reducing splashes. Always fit both before blending. For hot mixtures use the pitcher, keep solids and liquids below their separate MAX marks, start on LOW and increase speed only after the mixture is level without splashing.

If food sticks, stop with POWER and wait for the blade to stop. Lift the lid, move the ingredients with the supplied tamper, refit the lid and resume. Add more liquid if sticking continues; never substitute a spoon or your hand.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the easy-twist extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The N12-1007MK pack contains a 1200 W motor base, extractor blade, 900 mL and 700 mL cups, two flip-top lids and two lip rings. Fit a lid for carrying a finished drink; the nominal cup size does not replace the MAX line.

Push and twist the filled cup with its tightly fitted blade onto the base. The 60-second automatic cycle begins, and the blue light and motor switch off when it finishes. To stop early, twist anticlockwise; wait for the blades to stop before removing the cup.

For chunky salsa or coarse onions, press PULSE within five seconds of starting the automatic blend. The motor stops and the button flashes blue. Hold PULSE to turn the blades and release it to stop, waiting for a full stop between pulses. Pulse Mode times out after one minute; turn the cup anticlockwise to OFF before resuming normal operation.

Do not run for more than one minute at a time or more than three one-minute intervals without allowing 2–3 minutes of cooling after the third extraction. Let a warm cup cool before opening it away from your body.

Unplug the motor base and allow at least 15 minutes of cooling before trying again. Do not run the cup empty or without liquid.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The guide shows the motor base, easy-twist extractor blade, two 700 mL cups, a 590 mL travel cup and two To-Go Lids. Keep food and liquid within the cup’s MAX line, regardless of its nominal capacity.

Screw the easy-twist extractor blade tightly onto the cup. Invert the cup, place it on the base and turn clockwise to lock it; the extraction cycle runs automatically for one minute.

Gently turn the cup anticlockwise to unlock it; a click indicates release. Wait until blending has completely stopped before lifting the cup or removing the blade.

Set the suction-cup feet on a clean, dry, level worktop. Keep clear space beneath and around the base so the ventilation slots remain unobstructed.

Unplug the motor base and allow at least 15 minutes of cooling before trying again. Do not run the cup empty or without liquid.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the easy-twist extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

N10-0807DG has a 1000 W motor and a pre-programmed Auto-Blast cycle.

The Auto-Blast cycle shuts off automatically after extraction. Use the pocket nutritionist recipe guide supplied with the pack for recipes.

Check the full product code under your NutriBullet 1000 Series motor base and the guide supplied with your pack before choosing complete controls and accessory instructions.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Locking the cup onto the motor base starts the automatic 45-second cycle. To stop sooner, turn the cup anticlockwise and wait for the blade to stop before lifting the cup. Unlock and relock the cup to start another cycle.

Do not exceed three consecutive 45-second cycles. Let the contents settle for at least 10–20 minutes after repeated cycles, and never open a cup that still feels hot or warm.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The N10-1107AK pack contains two 700 mL cups and one 500 mL cup. Use the cup’s MAX line when filling.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

The separate Milling Blade has two flat prongs with duller edges and grinds uncooked, dry or low-moisture nuts, seeds and grains. Use it with the 18 oz Short Cup where supplied. Do not add liquid, moist food, spices or coffee, or make nut butter.

Fill below MAX, screw on the Milling Blade, then invert the cup and gently push and twist it onto the base. Mill for no more than one minute, stop and open the cup to check the texture and release pressure, and let the food cool to room temperature before repeating. Use smaller batches for large quantities. Do not pulse by repeatedly pushing and releasing the cup against the base actuators.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Check the full product code under your NutriBullet 1200 Series / 12 Piece motor base and the guide supplied with your pack before choosing complete controls and accessory instructions.

The N12-1007 pack has a 1200 W motor base, extractor blade, 900 mL cup, 900 mL handled cup, two To-Go Lids, two cup rings, a vessel grip and user guide.

The pack information describes a 60-second Auto-Blast cycle. Let the motor and blades stop completely before removing the cup.

Check the full product code under your NutriBullet 1200 Series / 10 Piece motor base and the guide supplied with your pack before choosing complete controls and accessory instructions.

The guide shows the motor base, easy-twist extractor blade, a 900 mL cup and a 700 mL handled cup, a 590 mL travel cup and two To-Go Lids. Keep food and liquid within the cup’s MAX line, regardless of its nominal capacity.

Screw the easy-twist extractor blade tightly onto the cup. Invert the cup, place it on the base and turn clockwise to lock it; the extraction cycle runs automatically for one minute.

Gently turn the cup anticlockwise to unlock it; a click indicates release. Wait until blending has completely stopped before lifting the cup or removing the blade.

Set the suction-cup feet on a clean, dry, level worktop. Keep clear space beneath and around the base so the ventilation slots remain unobstructed.

Unplug the motor base and allow at least 15 minutes of cooling before trying again. Do not run the cup empty or without liquid.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the easy-twist extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base with its matching cup and Extractor Blade. Keep food and liquid below the cup’s MAX line. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The blending assembly uses the motor base, cup and extractor blade. Add ingredients and liquid below the cup’s MAX line, then screw the extractor blade onto the cup until tightly sealed.

Place the motor base on a clean, dry, level surface with clear space beneath and around it for ventilation. Keep the base unplugged while assembling or changing parts. See the cup assembly illustrations in the linked guide before use.

Do not blend continuously for more than one minute. Before another one-minute cycle, let the contents settle for 2–3 minutes, make sure the cup is not warm, carefully open it to release pressure, and securely refit the blade.

If there is damage, a burning smell, smoke, liquid inside the electrical base or another malfunction, leave the appliance off and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase); do not use a cooling reset or run another test. Only if the motor has stopped without any of those warning signs, unplug the base and let it cool for at least 15 minutes to reset the internal thermal breaker. This motor-cooling period is not a warm-cup opening time; let the cup cool before opening it.

The guide does not recommend pressing the cup and blade assembly down and up on the actuators to pulse the motor, because this bypasses the cup-locking safety features.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

The guide shows a 700 mL handled cup, a To-Go Lid, the Extractor Blade and motor base. Use the cup’s MAX line for filling; its nominal volume is not a blending fill allowance.

Limit a run to 45 seconds, with no more than three consecutive 45-second intervals. Between intervals, let the motor stop, carefully open a cool cup to release pressure, and wait at least one minute.

Some configurations include a separate milling blade for herbs, spices, grains and seeds. Do not use the Extractor Blade to dry-grind grains, cereal or coffee.

If the motor stops from overheating, unplug the base and let it cool for one hour before trying again. The thermal breaker resets after unplugging and cooling.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Extracting is how your NutriBullet 700 Series breaks down fresh fruits and vegetables into a nutrient-rich smoothie. The Extractor Blade is designed specifically for this.

The NB07200-1007DG guide shows a 1000 W motor base, 900 mL cup, 700 mL handled cup, two To-Go Lids and an easy-twist extractor blade. Fit the supplied vessels to their matching base and blade; use their marked MAX lines when filling.

Press POWER to enable the controls; the button lights up. Press it to stop the blend, then power down fully and unplug when finished.

Press LOW for thin batter, gravy, marinades, eggs, cooked foods and uncooked fruit. Cool ingredients before blending them in a sealed cup. Press LOW again or POWER to stop.

Press HIGH for thick mixtures and frozen fruit or vegetables, with liquid added. Press HIGH again or POWER to stop.

Press EXTRACT to make smoothies with whole fruit, vegetables and ice plus liquid. The preset ends automatically; press EXTRACT again or POWER to stop it early.

Press and release PULSE for controlled chopping and processing. Holding it runs the motor until release. Do not pulse hot ingredients.

With a cup attached, LOW and HIGH stop automatically after 60 seconds. Wait until the blades stop before unlocking the vessel.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the easy-twist extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

The N12-1207MK-C pack includes one handled 900 mL cup, two additional 900 mL cups, two vessel grips, two flip-top lids and two lip rings. Use the MAX line when filling; 900 mL is the nominal cup size.

Check the full product code under your NutriBullet Pro+ Matte Black motor base and the guide supplied with your pack before choosing complete controls and accessory instructions.

The NBR-0807AW Essentials Kit includes a 600 W motor base, extractor blade, two 700 mL cups, a lip ring and a flip-top lid.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Twist the cup/blade assembly clockwise until it clicks securely onto the base; the control panel lights up only when the assembly is locked. When off, the panel is unlit.

Touch the illuminated Solid Circle to start the automatic 30-second blending program. Let the program stop before unlocking the cup.

Hold the Dashed Circle to pulse-blend and release it to stop. Tap for short intermittent pulses or hold for a longer pulse until the desired consistency is reached.

Do not blend continuously for more than one minute. After multiple extraction cycles, let the contents settle for 10–15 minutes. Leave a hot or warm cup closed until completely cool.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Twist the cup/blade assembly clockwise until it clicks securely onto the base; the control panel lights up only when the assembly is locked. When off, the panel is unlit.

Touch the illuminated Solid Circle to start the automatic 30-second blending program. Let the program stop before unlocking the cup.

Hold the Dashed Circle to pulse-blend and release it to stop. Tap for short intermittent pulses or hold for a longer pulse until the desired consistency is reached.

Do not blend continuously for more than one minute. After multiple extraction cycles, let the contents settle for 10–15 minutes. Leave a hot or warm cup closed until completely cool.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Twist the cup/blade assembly clockwise until it clicks securely onto the base; the control panel lights up only when the assembly is locked. When off, the panel is unlit.

Touch the illuminated Solid Circle to start the automatic 30-second blending program. Let the program stop before unlocking the cup.

Hold the Dashed Circle to pulse-blend and release it to stop. Tap for short intermittent pulses or hold for a longer pulse until the desired consistency is reached.

Do not blend continuously for more than one minute. Do not exceed six consecutive 30-second cycles; carefully open a cool cup between cycles to release pressure. After multiple extraction cycles, let the contents settle for 10–15 minutes. Leave a hot or warm cup closed until completely cool.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Fit the Work Bowl to the Processor Base and Blade Adapter. Use the Chopping Blade for chopping, mixing and mincing, or the reversible Slice/Shred Disc with the desired function facing up. Fit the Work Bowl Lid and use the Food Pusher to feed food.

Twist the Work Bowl onto the Processor Base until seated flush. Lock the assembly clockwise onto the motor base, align the lid’s locking tab with the locking mechanism, and push and twist the lid clockwise. The processor works only when the base and lid are locked; use the Solid Circle for its 30-second cycle and never use PULSE with the Work Bowl.

Align the Slice/Shred Disc’s marks with the Blade Adapter’s marks and fit it with the required cutting face upward. The disc should sit nearly flush with the Work Bowl’s top rim. Start processing before feeding food and press gently with the Food Pusher.

Stop and unplug the base, wait for the blade or disc to stop, then remove the lid first by turning it anticlockwise. Turn the bowl/base assembly anticlockwise and lift it off. Lift the blade or disc by the plastic centre hub before removing food; never tip the blade into your hand.

Hand-wash the Processor Base and Blade Adapter. The blade, disc, Work Bowl and lid can be hand-washed or placed on the dishwasher’s top rack without a heat or sanitise cycle. Soak stubborn blade/disc residue in room-temperature water with 1–2 drops of dish soap for 20–30 seconds, then scrub carefully.

Store the Blade Adapter, Chopping Blade and Slice/Shred Disc inside the Work Bowl. Hold the disc’s centre knob and lower the disc to the lower storage position without aligning its marks to the adapter marks, then fit the Work Bowl Lid. Keep all cutting edges covered.

Use the Grinding Cup and Grinder Blade with dry or dehydrated ingredients only. Do not add ice, liquid or moist food. Fill below MAX, assemble the cup onto the blade and twist the grinder clockwise onto the base until it clicks.

Use the Dashed Circle for short 1–2 second pulses until the coffee or spices reach the desired texture. Wait for the blade to stop, unlock the grinder anticlockwise and lift it off before opening the Grinding Cup.

After every use, unplug the base and separate the stopped grinder’s cup and blade. Hand-wash them with soap and water or use the dishwasher’s top rack without a heat or sanitise cycle. Store dry in a clean, cool place; never use the grinder as a food-storage container or put it in the fridge or freezer.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

NBR-1107AK uses 500 mL and 700 mL cups. Check the contents list supplied with your pack for the number of each; the MAX line determines how much to add for blending.

Use the motor base with its matching cup and Extractor Blade. Screw the blade onto the cup until tightly sealed; the blade assembly connects the cup to the base.

Turn the filled cup upside down, place it on the motor base, then gently push down and twist to start. Gently push and turn the cup anticlockwise to unlock it; wait until the motor and blade stop before lifting it off.

Keep each continuous blend within one minute. Stop if the cup becomes warm and let it cool before opening it away from your body.

If the motor stops, unplug the base and let it cool for at least 15 minutes before trying again. Keep ventilation openings clear and use a clean, dry, level surface.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the extractor blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Locking the cup onto the motor base starts the automatic 45-second cycle. To stop sooner, turn the cup anticlockwise and wait for the blade to stop before lifting the cup. Unlock and relock the cup to start another cycle.

Do not exceed three consecutive 45-second cycles. Let the contents settle for at least 10–20 minutes after repeated cycles, and never open a cup that still feels hot or warm.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.

Use the motor base, matching NutriBullet cup and Rapid Extractor Blade. Tighten the blade onto the cup, invert the assembly and twist it clockwise onto the base until it clicks. The base has suction-cup feet; keep the supporting surface clean, dry and level.

Locking the cup onto the motor base starts the automatic 45-second cycle. To stop sooner, turn the cup anticlockwise and wait for the blade to stop before lifting the cup. Unlock and relock the cup to start another cycle.

Do not exceed three consecutive 45-second cycles. Let the contents settle for at least 10–20 minutes after repeated cycles, and never open a cup that still feels hot or warm.

Use liquid-based blends and sufficient liquid with ice or frozen ingredients. Do not use the Rapid Extractor Blade as an ice crusher or to dry-grind grains, cereal or coffee.

When the blend is ready and the blades have stopped, remove the Rapid Extractor Blade and fit the To-Go Lid or transfer the food to a vented container. Never use the blade as a storage lid or leave blended food sealed underneath it.

Rinse or brush food residue off the cup and To-Go Lid, then wash them by hand with warm soapy water or place them on the dishwasher’s top rack. Do not use the heat or sanitise cycle.

Unplug the base and wait until all movement stops, then remove the cup/blade assembly. Wash the Rapid Extractor Blade with warm soapy water, using a small brush or sponge to loosen residue; handle the sharp edges carefully. Dry the blade completely before putting it away.

Wipe the unplugged motor base with a cloth or sponge dampened with soapy water. Keep the base out of the dishwasher, keep the motor base's ventilation openings clear, and never store an exposed blade on the base.