Press POWER, then choose LOW, MEDIUM, HIGH, PULSE or an available program; press the active speed or program to pause, or POWER to return to the main panel.
Applies to
- NutriBullet Smart Touch Blender Combo
NutriBullet Smart Touch Blender Combo
Press POWER and select a speed or program to start, press that active control to pause, or press POWER to return to the main panel and again to switch off.
How do I select and use speeds or programs?
- Assemble the Pitcher with its Lid and cap locked, or the Cup with its blade tightly sealed, then turn the vessel clockwise onto the Motor Base until it locks. Plug in the blender.
- With the Pitcher and Lid or Cup locked in place, press POWER; the Control Panel illuminates.
- Select LOW for thin batters, gravies, marinades, eggs, cooked foods and uncooked fruits.
- Select MEDIUM for creamed soups, sauces, spreads, dips, nuts, mixed drinks, powdered drinks and milkshakes, with liquid.
- Select HIGH for thick mixtures or frozen fruits and vegetables in smoothies.
- Press a speed once to start; the selected speed lights up and the other speeds dim. To change speed, press the desired dimmed button. Press the active speed to pause the motor and timer, then press a speed to resume.
Next steps
- Press and release PULSE to chop. Hold it for a longer burst and release to stop; never hold it continuously beyond one minute and never Pulse hot ingredients.
- Use SMOOTHIES to blend fresh or frozen fruits and vegetables into a drink.
- Use FROZEN DRINKS for ice-blended cocktails, mocktails and frappe-style drinks; include liquid.
- Use PURÉES for smooth dips, sauces and spreads.
- Use SOUPS only with the Pitcher for ready-to-heat soup or chilled gazpacho. The program blends ingredients; it does not heat them.
- Press a program to begin: that program stays lit and the rest of the panel disappears. Let the automatic changes in speed and pulsing complete; you will hear an alert and see the main panel return when finished.
Next steps
- Read the timer as elapsed time counting up during a manual speed, or time remaining counting down during a preset program.
- Press the active program to pause its motor and timer, then press the same program to resume.
- Press POWER once to return to the main panel; fully power down with a second press and unplug. Wait until the blades have stopped before removing the Pitcher or Cup.
- If the motor stops and the power and timer displays flash, unplug the Smart Touch Blender Combo, wait 15 minutes, and plug it back in to reset.
- Do not run the motor continuously for more than one minute. The Cup speeds stop automatically after 60 seconds; stop a Pitcher run yourself within the one-minute limit.
- If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before retrying.
How do I blend hot ingredients or adjust the mixture?
- For hot ingredients, use only the vented Pitcher with its Lid and Vented Lid Cap securely fitted, keep below the fill limits and start at LOW. Increase speed only when the mixture is smooth and steady. Keep hands away from escaping steam and open the Lid carefully after blending.
- Check that the Pitcher Lid vent openings are clear before blending; do not block the steam outlet.
- Stay beside the blender while it runs, keep hands away from the blades and remove all utensils before starting; do not put blender parts in a microwave.
- For cold mixtures, switch to LOW and remove only the lid cap to add ingredients; leave the main Lid fitted. Use only the supplied Tamper, then replace the cap before raising the speed. Do not add through this opening while blending hot ingredients.
- If ingredients stop moving, turn off, unplug and wait until the blades are still before opening. Reduce an overloaded batch; use the supplied Tamper to loosen food while stopped. Refit the Lid before restarting, and add liquid if the mixture still sticks.
- If the sealed Cup feels warm, let it cool before carefully opening it away from your body; never remove the blade while blending is still underway.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: Read the NutriBullet Smart Touch Blender Combo user guide (PDF)