Replace the complete single-serve blade assembly if its fixed gasket is loose, missing or damaged; chat with us to identify the correct repair or replacement for a loose or missing pitcher seal. Stop using the affected part, and follow the checks for your exact model before removing parts or choosing a replacement.
Need help identifying a replacement?
Have the full model name or product code and a clear photo of the affected part ready for our team. Keep the part out of use until the correct replacement or refitting instructions are identified.
Has liquid entered the motor base or electrical body?
If liquid has entered the motor base or electrical body, stop using it, unplug it only if it is safe to do so, and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase).
If a step above directs you to our team, or you need help with an unresolved issue in this article, see our warranty article.
NutriBullet Triple Prep System
Arrange a matching NutriBullet Triple Prep System Extractor Blade assembly replacement if its gasket is displaced, missing or damaged.
For the NutriBullet Triple Prep System, a missing or damaged gasket on the Extractor Blade means the blade must not be used. Check the cup blade separately from the pitcher or food processor attachments.
Is the blade gasket missing or damaged?
- Power off the NutriBullet Triple Prep System, unplug it and wait for the blades to stop. If the sealed cup feels hot or warm, leave it in place for at least 30 minutes and longer if still warm; do not handle or remove it until completely cool.
- Once the cup is cool, detach it from the motor base. Point it away from your face and body and use a towel to slowly untwist the blade, releasing any remaining pressure; then inspect the Extractor Blade gasket without touching the cutting edges.
- Stop using the affected blade if the gasket is absent, split or damaged. Arrange the correct replacement blade assembly through support before blending again.
Is residue covering the blade or gasket area?
- Detach the Extractor Blade from the cup only after the contents are cool and the motor is stopped.
- Use a small brush or sponge dampened in soapy water to remove residue from the Extractor Blade.
- Inspect the cleaned blade before reuse. If a seal is still displaced or damaged, leave the blade out of service and chat with us for the matching replacement.
Is the blade-to-cup connection loose instead of the gasket?
- Inspect the NutriBullet Triple Prep System cup for cracks, cloudiness or other damage and replace a damaged cup.
- With an intact gasket and undamaged cup, twist the Extractor Blade onto the cup until tightly sealed.
- If the parts will not join securely, stop using that attachment and have the model and replacement part checked. Use genuine parts intended for the NutriBullet Triple Prep System.
NutriBullet Blender Combo 1200
Replace the complete easy-twist extractor blade on the NutriBullet Blender Combo 1200, product code NBF07500-1210DG, if its gasket is loose, missing or damaged; have support check a Blender Combo 1200 pack or other product code before choosing its replacement. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
These blade checks apply to the NutriBullet Blender Combo 1200 with product code NBF07500-1210DG. For a Blender Combo 1200 pack or a different code, give support the product code and a photo of the affected part before choosing a replacement.
If the seal on the NutriBullet Blender Combo 1200 easy-twist extractor blade is loose, missing or damaged, stop using that blade assembly. Check the rubber gasket separately from the connection between the blade and cup.
Is the blade gasket loose, missing, worn or damaged?
- With the NutriBullet Blender Combo 1200 switched off, unplugged and fully stopped, detach the cup and blade assembly from the motor base.
- Inspect the gasket around the easy-twist extractor blade without touching the cutting edges. Do not pull the gasket out for cleaning or try to fit a separate replacement ring.
- If the gasket has come out, set the easy-twist extractor blade aside and replace the complete blade assembly before blending again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
- Look at the exposed gasket and the bottom of the easy-twist extractor blade; check for a split seal, cracking or breakage.
- A damaged gasket needs a replacement easy-twist extractor blade, even if the NutriBullet Blender Combo 1200 has only been used a few times.
Was the blade put in a dishwasher or exposed to high heat?
- Dishwasher hot water can damage the seal around the NutriBullet Blender Combo 1200 blade attachment.
- If the seal is now loose or damaged, replace the blade attachment; cleaning will not repair the seal.
- For the replacement blade, hand-wash with soap and water instead of placing it in the dishwasher.
Is dried food around the blade hiding the condition of the seal?
- Hand-wash the detached easy-twist extractor blade with soap and water, keeping fingers away from sharp edges.
- Use a small brush or sponge to remove stuck food from the accessible surfaces; leave the blade assembly intact.
- Dry the easy-twist extractor blade completely and inspect again. Only use an intact blade with its gasket in place; replace a blade whose seal is loose or damaged. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is the whole blade attachment loose on the cup?
- If the gasket is intact and in place, align the easy-twist extractor blade with the cup and twist it on until tightly sealed.
- Check the cup and blade attachment for cracks or damaged threads if they will not join securely.
- Stop using the damaged part and replace it with the correct NutriBullet Blender Combo 1200 part; do not continue blending with a loose connection.
NutriBullet SmartSense Blender
Keep the affected NutriBullet SmartSense Blender part out of use while the ring and matching replacement are identified.
Which part has the loose or missing ring?
- Check the product code on the NutriBullet SmartSense Blender; include NBF07600 if that is the code shown.
- Note whether the ring came from the lid, pitcher or another accessory, and keep it with that part.
- Send support a photo of the ring, its original position and the complete part so the correct repair or replacement can be specified.
NutriBullet Smart Touch Blender Combo
Replace the complete NutriBullet Smart Touch Blender Combo easy-twist extractor blade when its gasket is loose, missing or damaged.
If the seal on the NutriBullet Smart Touch Blender Combo easy-twist extractor blade is loose, missing or damaged, stop using that blade assembly. Check the rubber gasket separately from the connection between the blade and cup.
Is the blade gasket loose, missing, worn or damaged?
- With the NutriBullet Smart Touch Blender Combo switched off, unplugged and fully stopped, detach the cup and blade assembly from the motor base.
- Inspect the gasket around the easy-twist extractor blade without touching the cutting edges. Do not pull the gasket out for cleaning or try to fit a separate replacement ring.
- If the gasket has come out, set the easy-twist extractor blade aside and replace the complete blade assembly before blending again.
- Look at the exposed gasket and the bottom of the easy-twist extractor blade; check for a split seal, cracking or breakage.
- A damaged gasket needs a replacement easy-twist extractor blade, even if the NutriBullet Smart Touch Blender Combo has only been used a few times.
Was the blade put in a dishwasher or exposed to high heat?
- Dishwasher hot water can damage the seal around the NutriBullet Smart Touch Blender Combo blade attachment.
- If the seal is now loose or damaged, replace the blade attachment; cleaning will not repair the seal.
- For the replacement blade, hand-wash with soap and water instead of placing it in the dishwasher.
Is dried food around the blade hiding the condition of the seal?
- Hand-wash the detached easy-twist extractor blade with soap and water, keeping fingers away from sharp edges.
- Use a small brush or sponge to remove stuck food from the accessible surfaces; leave the blade assembly intact.
- Dry the easy-twist extractor blade completely and inspect again. Only use an intact blade with its gasket in place; replace a blade whose seal is loose or damaged.
Is the whole blade attachment loose on the cup?
- If the gasket is intact and in place, align the easy-twist extractor blade with the cup and twist it on until tightly sealed.
- Check the cup and blade attachment for cracks or damaged threads if they will not join securely.
- Stop using the damaged part and replace it with the correct NutriBullet Smart Touch Blender Combo part; do not continue blending with a loose connection.
The sealed gasket keeps food particles on its surface, which helps with cleaning.
We recommend replacing the whole easy-twist extractor blade every six months for best performance, or sooner if it becomes loose or damaged.
The gasket is deep-seated and factory sealed in the blade housing, so it cannot be replaced on its own.
NutriBullet Power Core Blender
Request the correct replacement for a NutriBullet Power Core Blender pitcher or lid with a loose or missing seal, using a photo of the affected part and seal location to identify it.
If a ring or piece has come loose from the NutriBullet Power Core Blender pitcher or lid, keep that part out of use and identify where it came from before reassembly.
Is the loose piece part of a damaged pitcher or lid?
- Turn off and unplug the NutriBullet Power Core Blender, wait for all parts to stop and remove the Pitcher from the Motor Base.
- Inspect the Pitcher for cracks or damage; replace a damaged Pitcher rather than continuing to blend with it. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
- For a loose ring without an obvious origin, send support a photo of the ring and the pitcher or lid so the correct component can be identified.
Is the lid sitting incorrectly on the pitcher?
- Hand-wash the detached Pitcher and lid with warm, soapy water; use a dish brush or sponge on stuck-on food.
- Once the parts are clean and undamaged, fit the Pitcher Lid with its cap, aligning the rear loop opposite the spout with the handle.
- The lid must sit securely before blending. If a piece remains loose or a seal is missing, keep the affected part out of use and request the correct replacement.
NutriBullet Blender Combo 1000
Replace the complete NutriBullet Blender Combo 1000 easy-twist extractor blade when its gasket is loose, missing or damaged. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
If the seal on the NutriBullet Blender Combo 1000 easy-twist extractor blade is loose, missing or damaged, stop using that blade assembly. Check the rubber gasket separately from the connection between the blade and cup.
Is the blade gasket loose, missing, worn or damaged?
- With the NutriBullet Blender Combo 1000 switched off, unplugged and fully stopped, detach the cup and blade assembly from the motor base.
- Inspect the gasket around the easy-twist extractor blade without touching the cutting edges. The gasket must sit completely within the blade assembly.
- If the gasket has come out, set the easy-twist extractor blade aside and replace the complete blade assembly before blending again. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
- Look at the exposed gasket and the bottom of the easy-twist extractor blade; check for a split seal, cracking or breakage.
- A damaged gasket needs a replacement easy-twist extractor blade, even if the NutriBullet Blender Combo 1000 has only been used a few times.
Is dried food around the blade hiding the condition of the seal?
- Hand-wash the detached easy-twist extractor blade with soap and water, keeping fingers away from sharp edges.
- Use a small brush or sponge to remove stuck food from the accessible surfaces; leave the blade assembly intact.
- Dry the easy-twist extractor blade completely and inspect again. Only use an intact blade with its gasket in place; replace a blade whose seal is loose or damaged. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Is the whole blade attachment loose on the cup?
- If the gasket is intact and in place, align the easy-twist extractor blade with the cup and twist it on until tightly sealed.
- Check the cup and blade attachment for cracks or damaged threads if they will not join securely.
- Stop using the damaged part and replace it with the correct NutriBullet Blender Combo 1000 part; do not continue blending with a loose connection.
NutriBullet Power Core Blender Combo
Arrange a replacement Extractor Blade assembly for the NutriBullet Power Core Blender Combo, product code NBF07202AK, if its gasket is displaced, missing or damaged; have support check any other product code before choosing its replacement.
These checks apply to the NutriBullet Power Core Blender Combo with product code NBF07202AK. If your product code is NBF07200 or another code, provide support with that code and a photo of the affected part before fitting a replacement.
For the NutriBullet Power Core Blender Combo, a missing or damaged gasket on the Extractor Blade means the blade must not be used. Check the cup blade separately from the other attachments.
Is the blade gasket missing or damaged?
- Power off the NutriBullet Power Core Blender Combo, unplug it and wait for the blades to stop. If the sealed cup feels hot or warm, leave it in place for at least 30 minutes and longer if still warm; do not handle or remove it until completely cool.
- Once the cup is cool, detach it from the motor base. Point it away from your face and body and use a towel to slowly untwist the blade, releasing any remaining pressure; then inspect the Extractor Blade gasket without touching the cutting edges.
- Stop using the affected blade if the gasket is absent, split or damaged. Arrange the correct replacement blade assembly through support before blending again.
Is residue covering the blade or gasket area?
- Detach the Extractor Blade from the cup only after the contents are cool and the motor is stopped.
- Wash the detachable parts with warm, soapy water and remove visible food residue from accessible surfaces.
- Inspect the cleaned blade before reuse. If a seal is still displaced or damaged, leave the blade out of service and chat with us for the matching replacement.
Is the blade-to-cup connection loose instead of the gasket?
- Inspect the NutriBullet Power Core Blender Combo cup for cracks, cloudiness or other damage and replace a damaged cup.
- With an intact gasket and undamaged cup, twist the Extractor Blade onto the cup until tightly sealed.
- If the parts will not join securely, stop using that attachment and have the model and replacement part checked. Use genuine parts intended for the NutriBullet Power Core Blender Combo.
NutriBullet Power Core Plus
Keep the affected NutriBullet Power Core Plus part out of use while the ring and matching replacement are identified.
Which part has the loose or missing ring?
- Check the product code on the NutriBullet Power Core Plus; include NBF07200AKP if that is the code shown.
- Note whether the ring came from the lid, pitcher or another accessory, and keep it with that part.
- Send support a photo of the ring, its original position and the complete part so the correct repair or replacement can be specified.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet Triple Prep System user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Blender Combo 1200 user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Smart Touch Blender Combo user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Power Core Blender user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Blender Combo 1000 user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Power Core Blender Combo user guide (PDF)