1. Switch off, unplug and wait for the Sieve to stop before taking the juicer apart; remove the Food Pusher, lift off the Basin Cover, then lift the Sieve by its rim without touching its sharp teeth.
2. Empty the Pulp Basin, using the flat end of the Cleaning Brush to scrape out pulp, then rinse the removable parts under running water.
3. Scrub the Sieve with the Cleaning Brush under running water immediately after every use until the holes are clear; keep fingers away from the teeth on its flat disc.
4. If pulp has dried on the Sieve, soak the detached Sieve in hot water for 30 minutes, then brush and rinse away the softened pulp.
5. For original NBJ07100, hand-wash the Food Pusher with warm, soapy water and wash the other removable juicing parts by hand or in the dishwasher. Never use the dishwasher sterilise cycle.
6. Wipe the Motor Base with a clean, damp cloth.
7. Store the Juice Pitcher upright with its lid tightly sealed and latch closed, and put nothing on the lid; keep sharp parts safely stored where they cannot be damaged.

1. Unplug the Motor Base, detach the parts and empty the Juice and Pulp Containers before washing.
2. Rinse the Juice Bowl Cover, Food Pusher, Auger, Juicing Screen, Rotating Bowl Brush, Juice Bowl and both containers under running water.
3. Hand-wash the Auger with warm, soapy water and a soft cloth; do not put it in the dishwasher.
4. Wash the other removable parts in warm, soapy water or the dishwasher. Using no metal sponge that can damage the surfaces.
5. Scrub the Juicing Screen with the small Cleaning Brush under running water every time you juice, until residue is removed from the holes; handle the sharp screen carefully.

Next steps

1. To clean the pulp spout, pull its pulp plug out, brush inside with the narrow end of the Cleaning Brush, and run water through the bowl and spout to flush out remaining pulp.
2. Clean promptly after juicing; soak detached parts with dried pulp in hot water for 30 minutes to soften the residue before scrubbing.
3. Wipe the outside of the Motor Base with a clean, damp cloth.
4. Dry all parts thoroughly before reassembling and storing in a safe, dry place. The Juice Container nests inside the Pulp Container for storage; lift the juicer by its base, not its bowl or cover.

1. Switch off, unplug and wait for the Sieve to stop before taking the juicer apart; remove the Food Pusher, lift off the Basin Cover, then lift the Sieve by its rim without touching its sharp teeth.
2. Empty the Pulp Basin, using the flat end of the Cleaning Brush to scrape out pulp, then rinse the removable parts under running water.
3. Scrub the Sieve with the Cleaning Brush under running water immediately after every use until the holes are clear; keep fingers away from the teeth on its flat disc.
4. If pulp has dried on the Sieve, soak the detached Sieve in hot water for 30 minutes, then brush and rinse away the softened pulp.
5. Hand-wash the Food Pusher with warm, soapy water. Wash the other removable juicing parts in warm, soapy water or the dishwasher; do not use its sterilise cycle because high heat can deform parts.

Next steps

1. Wipe the Motor Base with a clean, damp cloth.
2. Store the Juice Pitcher upright with its lid tightly sealed and latch closed, and put nothing on the lid; keep sharp parts safely stored where they cannot be damaged.
3. Wash the Glass Storage Bottles, their lids, Freezer Trays and tray lids in the dishwasher or by hand.
4. Leave about 0.6 cm of space at the top of each filled Glass Storage Bottle; use the Freezer Trays for frozen juice portions rather than filling a bottle to the brim.

The cover underneath the Juicing Bowl is silicone.

1. Turn the Dial to OFF and unplug. Open the Lid, turn the Hopper counterclockwise until its arrows no longer align, and lift it off; pull the Auger straight up, then lift the Juicing Bowl off the Motor Base.
2. Empty the Hopper and Juicing Bowl and rinse the removable parts under running water.
3. Scrub the Auger under running water with the Cleaning Brush and clean the Hopper and Juicing Bowl after every use so pulp does not build up.
4. Clean under the Juicing Bowl, including its Silicone Cover, Spouts and Spout Cover; push the Silicone Cover firmly back into position until it sits fully flush.
5. Hand-wash removable parts with warm, soapy water or put them in the dishwasher without a sterilise cycle; keep the Motor Base out of the dishwasher.

Next steps

1. Use no metal sponges or abrasive pads, which can damage the surfaces; do not microwave parts or immerse them in or hold them over boiling water.
2. Wipe the Motor Base with a clean, damp cloth.
3. Inspect parts for wear or cracks before use, especially the Auger; replace a cracked, bent or damaged detachable part before using the juicer again.
4. Store the parts together safely where they cannot be damaged or cause harm.