Use the blade or disc specified for your exact blender, vessel and food-preparation task; attachment choices are not the same for every model. Select your model to see which blade or disc to use.
NutriBullet Triple Prep System
Choose the Chopping Blade for chopping, mixing or mincing, the Dough Blade for bread, pizza or pie dough, and the Reversible Slice/Shred Disc for slices or shreds.
Which Triple Prep attachment fits the food?
- Use the NutriBullet Triple Prep System Chopping Blade for chopping, mixing and mincing; choose Chop for toppings or mixes, Dip for spreads and dips, or hold Pulse for manual chopping.
- Choose the Dough Blade for bread, pizza or pie dough; pulse wet and dry ingredients together, then use Dough or Low for kneading, never a higher speed.
- Choose the Reversible Slice/Shred Disc for sliced or shredded ingredients, with the required labelled side facing up.
- On the Reversible Slice/Shred Disc, the slicing side handles root vegetables, onions, fruit and cured sausage.
- The Chopping Blade finely chops for salsas, sauces, dips, soup bases, stir-fries and purées.
- The shredding side of the Reversible Slice/Shred Disc shreds cabbage, carrots, potatoes and cheese.
- The Dough Blade mixes and folds dough for pie crust, pizza dough, small batch biscuits and shortbread.
How do I fit the processor blade or disc?
- On a flat, clean, dry surface, push the Blade Adapter onto the Work Bowl’s central shaft, then fit the Chopping Blade or Dough Blade onto its shaft.
- For a disc, align the markings on the disc and adaptor so it sits in the higher working position; if it sits low, remove and rotate it until the marks connect.
- Prepare chopping ingredients by removing seeds, stems and inedible pieces and cutting large items into 2.5–5cm pieces; add food below the Work Bowl MAX line.
- Place the Work Bowl on the unplugged motor base and turn clockwise until it clicks; attach the lid afterwards, twisting clockwise until its arrows align, and insert the Food Pusher.
- For chopping, plug in and use the food-processor menu; Low, Medium and High are also available for alternative processing speeds.
- To add liquid, turn the Pusher Cap clockwise and remove the Inner Pusher; pour through the top chute below MAX and reinsert the pusher.
- For slicing or shredding, select High before feeding. Use the smaller inner chute for narrow pieces or remove the whole pusher for larger pieces; only the supplied pusher should guide food.
- Avoid overloading the Feed Chute or forcing the pusher; let food travel down naturally, and keep fingers and utensils away from the blades.
How do I remove and store the processor attachments?
- After switching off, wait for complete stopping and unplug; unlock the Work Bowl Lid counter-clockwise before turning the Work Bowl counter-clockwise off the base.
- Lift the blade or disc by its central plastic area before taking food out with a spoon or spatula; do not use a scraper while the processor is running.
- Detach blades, discs and adaptor from the Work Bowl before washing; rinse away debris, then use soap and water or the top dishwasher rack with no heat/sanitise cycle.
- Store adaptor, Chopping Blade, Dough Blade and Slice/Shred Disc in that order inside the Work Bowl; the disc’s lower position is for storage, and the lid must cover all cutting edges.
- Inspect the blades and discs for damage before reuse; do not fit damaged components, aftermarket substitutes or an exposed blade directly onto the motor base.
Which blade belongs to the blender vessels?
- Use the pitcher’s integrated blade for the Blending Pitcher and the Extractor Blade with the matching single-serve cup; keep the processor blades and discs in the Work Bowl.
- Clean the Extractor Blade promptly with a small brush or sponge and soapy water; keep a cup fitted over the blade for safe storage.
- For stuck cup residue, fill to MAX with room-temperature water and one or two drops of dish soap, refit the Extractor Blade and blend 20–30 seconds before disconnecting and scrubbing; use half a pitcher of water for pitcher residue.
- Check the Extractor Blade for free rotation and an intact gasket; replace it around six months depending on use, or sooner if damaged. This recommendation is for the extractor, not the processor disc. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Slice side: root vegetables, onions, fruit and cured sausage.
Shred side: cabbage, carrots, potatoes and cheese.
Use the Chopping Blade to chop finely for salsas, sauces, dips, soup bases, stir-fries and purées, with hard, leafy or soft cooked ingredients.
The Reversible Slice/Shred Disc slices on one side and shreds on the other.
The Dough Blade mixes and folds dough for pie crust, pizza dough, small-batch biscuits and shortbread.
NutriBullet Blender Combo 1200
For NBF07500-1210DG, blend pitcher recipes with the integrated pitcher blade and cup recipes with the Easy-Twist Extractor Blade on its matching cup.
Which blade belongs with the pitcher or cup?
- For product code NBF07500-1210DG, use the NutriBullet Blender Combo 1200 pitcher with its integrated blade for pitcher recipes; attach the Easy-Twist Extractor Blade to the matching single-serve cup for cup blending.
- Leave the integrated pitcher blade in the pitcher; do not remove it or try to install a processor chopping blade or slicing disc in that vessel.
- For the cup, add ingredients and liquid below MAX, use cold or room-temperature ingredients, then twist the extractor blade onto the cup until tightly sealed.
- Turn the cup assembly upside down and turn clockwise into the motor base until locked; keep a hand away from the cutting edges when handling the detached blade.
How should I check and clean the blades?
- After blending has stopped, switch off and unplug, then detach the cup/blade assembly or pitcher before washing.
- Hand-clean the Extractor Blade promptly using soap and water and a small brush or sponge for trapped food; dry it completely after each use.
- Keep the blade’s components and gasket in place; if the blade becomes loose or its underside cracks or breaks, stop using and replace the whole attachment.
- Rinse and brush residue from the pitcher, then hand-wash with soap and water or use the dishwasher without a sanitise cycle; keep fingers clear of its integrated blades.
- Check the pitcher and threads for cracking, crazing or breakage; stop using and replace a damaged vessel. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
How should I store the blade and pitcher?
- Store the pitcher upright with its lid attached and nothing on the lid; place other pieces safely where they cannot be damaged.
- Do not store an exposed extractor blade on the motor base; cover it with its matching cup and do not keep a blend sealed under the blade as a storage lid.
NutriBullet SmartSense Blender
Use Deluxe Easy Twist blade ANBFB-BA033CDB with the exact SmartSense appliance and matching vessel listed for that part. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Which blade should I match before buying?
- For NutriBullet SmartSense Blender, match the Deluxe Easy Twist blade ANBFB-BA033CDB to the exact SmartSense appliance and its matching vessel; do not order a disc or a different blade based on a similar motor rating.
- Use the blade and cup designed for the exact NutriBullet SmartSense Blender; check the full model name and part listing before fitting an accessory.
NutriBullet Smart Touch Blender Combo
Blend in the pitcher using its integrated blade, or use the Easy-Twist Extractor Blade with the matching single-serve cup.
Which blade belongs with the pitcher or cup?
- Use the NutriBullet Smart Touch Blender Combo pitcher with its integrated blade for pitcher recipes; attach the Easy-Twist Extractor Blade to the matching single-serve cup for cup blending.
- Leave the integrated pitcher blade in the pitcher; do not remove it or try to install a processor chopping blade or slicing disc in that vessel.
- For the cup, add ingredients and liquid below MAX, use cold or room-temperature ingredients, then twist the extractor blade onto the cup until tightly sealed.
- Turn the cup assembly upside down and turn clockwise into the motor base until locked; keep a hand away from the cutting edges when handling the detached blade.
How should I check and clean the blades?
- After blending has stopped, switch off and unplug, then detach the cup/blade assembly or pitcher before washing.
- Hand-clean the Extractor Blade promptly using soap and water and a small brush or sponge for trapped food; dry it completely after each use.
- Keep the blade’s components and gasket in place; if the blade becomes loose or its underside cracks or breaks, stop using and replace the whole attachment.
- Rinse and brush residue from the pitcher, then hand-wash with soap and water or use the dishwasher without a sanitise cycle; keep fingers clear of its integrated blades.
- Check the pitcher and threads for cracking, crazing or breakage; stop using and replace a damaged vessel. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
How should I store the blade and pitcher?
- Store the pitcher upright with its lid attached and nothing on the lid; place other pieces safely where they cannot be damaged.
- Do not store an exposed extractor blade on the motor base; cover it with its matching cup and do not keep a blend sealed under the blade as a storage lid.
NutriBullet Blender Combo 1000
For pitcher recipes use the integrated pitcher blade; for single-serve cup recipes use the matching Easy-Twist Extractor Blade.
Which blade belongs with the pitcher or cup?
- Use the NutriBullet Blender Combo 1000 pitcher with its integrated blade for pitcher recipes; attach the Easy-Twist Extractor Blade to the matching single-serve cup for cup blending.
- Leave the integrated pitcher blade in the pitcher; do not remove it or try to install a processor chopping blade or slicing disc in that vessel.
- For the cup, add ingredients and liquid below MAX, use cold or room-temperature ingredients, then twist the extractor blade onto the cup until tightly sealed.
- Turn the cup assembly upside down and turn clockwise into the motor base until locked; keep a hand away from the cutting edges when handling the detached blade.
How should I check and clean the blades?
- After blending has stopped, switch off and unplug, then detach the cup/blade assembly or pitcher before washing.
- Hand-clean the Extractor Blade promptly using soap and water and a small brush or sponge for trapped food; dry it completely after each use.
- Keep the blade’s components and gasket in place; if the blade becomes loose or its underside cracks or breaks, stop using and replace the whole attachment.
- Rinse and brush residue from the pitcher, then hand-wash with soap and water or use the dishwasher without a sanitise cycle; keep fingers clear of its integrated blades.
- Check the pitcher and threads for cracking, crazing or breakage; stop using and replace a damaged vessel. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
How should I store the blade and pitcher?
- Store the pitcher upright with its lid attached and nothing on the lid; place other pieces safely where they cannot be damaged.
- Do not store an exposed extractor blade on the motor base; cover it with its matching cup and do not keep a blend sealed under the blade as a storage lid.
NutriBullet Power Core Blender
Use the integrated six-point stainless-steel blade in the Power Core Blender’s 2.1 L pitcher, keeping the blade installed in that pitcher.
Which Power Core cutting part should I use?
- Use the NutriBullet Power Core Blender’s 2.1L pitcher with its integrated six-point stainless-steel blade; keep that blade in its pitcher.
- Use only genuine attachments designed for NutriBullet Power Core Blender; do not fit a processor blade or disc by matching wattage.
- Remove stone-fruit pits and seeds; do not grind dry grains, cereal or coffee, which can damage blades or overheat the motor.
How should I use and look after the pitcher blade?
- Secure the Pitcher Lid and vented cap before blending; use the pitcher’s MAX marks and begin hot blending on Low.
- If the blade is damaged or will not rotate freely, stop using the pitcher and obtain help with its replacement.
- Switch off, unplug and wait for all motion to stop, then remove the pitcher from the motor base.
- Rinse and scrub remaining food with a dish brush before dishwashing, without a sanitise cycle; alternatively wash with soap and water and a brush or sponge.
- Replace a cracked or damaged pitcher and never run a pitcher that does not fit the motor base correctly. Buy a replacement pitcher (Australia) or pitcher (New Zealand).
- Store the pitcher upright with the lid on and nothing stacked above it; keep remaining parts in a safe place.
NutriBullet Power Core Blender Combo
Use the Power Core Blender Combo pitcher for pitcher recipes and the matching Extractor Blade and cup for cup recipes.
Which Power Core Combo blade goes with each vessel?
- Use the NutriBullet Power Core Blender Combo pitcher for pitcher blending and the Extractor Blade with its matching cup; fit the supplied vessel and blade combination rather than a processor disc.
- For the cup, add ingredients and sufficient liquid below MAX; never use hot, warm, carbonated or effervescent ingredients in the sealed cup.
- Twist the Extractor Blade onto the cup until tightly sealed, invert the assembly and turn it clockwise onto the base; press Power, then Smoothie.
- Limit cup blending to one minute; let ingredients settle for 10–15 minutes and safely release pressure before another cycle, and never open a cup while it is hot or warm.
- When blending is complete, wait for the blades to stop, press Power off and unlock the cup counter-clockwise.
How do I clean and store the attachments?
- Unplug before cleaning and remove the pitcher or cup from the base; handle the sharp blades carefully.
- Hand-wash the pitcher with soap and water, or rinse and scrub first before dishwashing without a heat/sanitise cycle.
- For dried residue, fill the undamaged cup or pitcher to liquid MAX with room-temperature water and one or two drops of dish soap; secure the blade or lid/vented cap and blend on Low for 20–30 seconds, then disconnect and scrub clean.
- Check the pitcher and threaded areas for cracks, crazing or breakage and replace a damaged vessel.
- Store the pitcher upright with its lid fitted and nothing on top, and keep the other pieces safe from damage.
- Remove the Extractor Blade before storing a blend; use the To-Go Lid or transfer to a vented container.
- Choose only genuine attachments made for NutriBullet Power Core Blender Combo when replacing a cutting part.
NutriBullet Power Core Plus
The Australian NutriBullet Power Core Plus pack (NBF07200AKP) includes a deluxe easy-twist extractor blade. If you need a replacement, give our team the product code and a photo of the original blade so they can check the fit.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet Triple Prep System user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Smart Touch Blender Combo user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Blender Combo 1000 user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Power Core Blender user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Power Core Blender Combo user guide (PDF)