• Use the exact Immersion Blender model when ordering; the attachments are model-specific, so do not choose a part solely because its socket looks similar.
• For a replacement chopper, match the bowl, lid and S-blade together: the S-blade locks onto the centre pin and the lid connects to the Motor Body.
• For a replacement whisk, check that you have the Whisk Holder as well as the wire whisk; the holder locks onto the Motor Body.
• Keep the Blending Arm as a single part rather than trying to remove its internal blade.

1. Unplug and wait for all movement to stop before changing attachments; push the Motor Body into the Blending Arm or Whisk Holder and turn clockwise until it locks, then check it does not separate.
2. For the chopper, press the S-blade onto the centre pin, load the bowl, turn its lid clockwise to lock, then push and turn the Motor Body clockwise into the lid.
3. Inspect the vessel for cracking, crazing, cloudiness or other damage and check that the blade or whisk rotates freely; stop using and replace a damaged detachable part. Buy a replacement whisk (Australia) or whisk (New Zealand).
4. Wash the Chopping Bowl, S-blade, Whisk and Blending Cup with warm soapy water or in the dishwasher.
5. Hand-clean the Blending Arm and Whisk Holder without soaking; wipe the Chopping Bowl Lid with a damp soapy cloth and keep these gear-containing parts out of the dishwasher.
6. Clean after use, avoid metal sponges, dry every part thoroughly and store safely in a dry place; wipe the Motor Body only. NEVER submerge the main unit in water.

• For the NBI07110 blending arm, check BDM-BA006CDB; match your original arm and full appliance code before ordering. Buy a replacement NutriBullet Immersion Blending Blade Arm (Australia) or NutriBullet Immersion Blending Blade Arm (New Zealand).
• For the NBI07110 cup with lid, check NIBM-CLKITCDB rather than choosing a different cup by capacity alone.

• Match chopping blade BDM-BA007CDB to the NBI07110 Immersion Blender 800W when checking the listing.
• For the NBI07110 chopper bowl and lid, check replacement NIBM-BLKITCDB. Buy a replacement Nutribullet Immersion Blender Chopping Bowl (Australia) or Nutribullet Immersion Blender Chopping Bowl (New Zealand).
• For the NBI07110 whisk attachment, check replacement NIBM-WHKITCDB. Buy a replacement Nutribullet Immersion Blender Whisk Attachment (Australia) or Nutribullet Immersion Blender Whisk Attachment (New Zealand).

• Use the EveryGrain Steaming Basket, Rice Spatula and Rice/Grain Measuring Scoop; the supplied scoop measures 180 ml, equivalent to 150 g of uncooked rice.
• Identify the Sealing Panel, removable Steam Vent plug and Condensation Collector separately when describing a missing or damaged piece.
• For an accessory or replacement part, use the EveryGrain Cooker name and the part name shown here when checking the official parts listing.

1. Turn off, unplug, detach the power cord and let the cooker cool before removing or fitting parts; use oven mitts for a hot Cooking Pot or Steaming Basket.
2. Cook only in the removable Cooking Pot or Steaming Basket, and never pour cooking liquid straight into the Cooker Base.
3. After assembly, close the Cooker Lid fully until it clicks; do not operate with the lid open.
4. Hand-wash the Cooking Pot with warm soapy water to preserve its nonstick coating; do not use steel wool on the pot, Sealing Panel or other cooker parts.
5. Wash the Steaming Basket, Rice Spatula and Measuring Scoop in warm soapy water or the dishwasher.

Next steps

1. For stuck food, soak the pot in warm soapy water; for stubborn residue, apply dishwashing liquid for a few minutes before soaking instead of scraping the coating.
2. Clean the Sealing Panel and Condensation Collector with a damp warm-soapy cloth after use; remove and rinse the Steam Vent plug and wipe inside the vent.
3. Once completely cool and unplugged, wipe the heating plate and Cooker Base with a damp cloth. NEVER submerge the main unit in water.
4. Store the cooker upright in a cool, dry place with the accessories and power cord together.

• For a matching set of small accessories, choose the EveryGrain Cooker Accessory Kit containing the steaming basket, measuring scoop and rice spoon.

• For a replacement NBG07100 rice/grain measuring cup, check BDM-VE057CDB. Buy a replacement NutriBullet Everygrain Cooker Measuring Cup (Australia) or NutriBullet Everygrain Cooker Measuring Cup (New Zealand).

• For the NBG07100 EveryGrain Cooker rice spoon, check replacement BDM-VE056CDB.

• For the required cutting tool, identify the Chopping Blade, Dough Blade, Reversible Thin Slice/Shred Disc, Reversible Thick Slice/Shred Disc or Spiralizer Disc.
• Use only the bowl and blade attachments intended for the NutriBullet Food Processor; match each replacement to the full product code on your appliance.
• Check each replacement for cracks or damage before fitting, and replace any damaged bowl or attachment rather than continuing to use it.

1. With power off and the base unplugged, lower the Blade Adaptor onto the Work Bowl centre shaft and push it firmly into place.
2. For a chopping or dough blade, hold the plastic centre and slide it down the adaptor to the bowl bottom; operate with only one blade fitted.
3. For a slice/shred disc, align its marks with the adaptor so it sits in the high working position; the lower position is for storage.
4. For the Spiralizer Disc, align its notches with the tabs inside the Work Bowl and turn FRONT towards the front of the base, placing the spiralizer beneath the Feed Chute.
5. Turn the Work Bowl Lid clockwise until the arrows on the lid and handle align; insert the pusher and turn the complete bowl clockwise onto the base until it clicks.

1. Clean the removable adaptor, blades, discs, bowl, lid and pusher after use with warm soapy water or on the dishwasher top rack; avoid sanitise cycles, steel wool and hard scouring tools.
2. Wipe the unplugged Motor Base with a damp soapy cloth and brush the actuator area if needed. Do not dismantle the base.
3. For storage, put the Blade Adaptor, Chopping Blade and Dough Blade in the bowl, then lower the discs into the storage position with their marks unaligned.
4. Choose either both Slice/Shred Discs, or one Slice/Shred Disc and the Spiralizer Disc last; the full set will not store together.
5. Lock on the lid, put the pusher in the chute and tuck the cord under the base; never leave cutting edges exposed.

• Check disc BDM-BA014CDB against the NBP07100 Food Processor listing, including the cutting function you need before ordering.

• For blending a recipe before freezing, use only a blender blade block specifically listed as compatible with the Chill Pint Cup; check the compatibility listing before fitting it.
• For that pre-freezing blend, use only cool or room-temperature, non-carbonated ingredients and blend for no longer than 30 seconds; stay below the Pint Cup MAX line.
• For churning in the Chill, fit the Chill blade assembly and use a properly frozen recipe between MIN FILL and MAX FILL; do not run an empty cup or add loose ice, frozen fruit or dry hard ingredients.

1. Inspect the Pint Cup for cracks and the Blade Block for damage before each use; stop using and replace damaged detachable parts.
2. Fully retract the Blade Shaft so the Blade touches the top of the Blade Block; adjust it by the shaft, keeping fingers away from the cutting edges.
3. Turn the Blade, Blade Block and Shaft assembly clockwise onto the Pint Cup until secure.
4. Keep the shaft dry inside and out, lower the inverted cup assembly shaft-first onto the Motor Base, align the cup tabs and base notches, then press down and turn clockwise to lock.
5. After the program ends and the blade stops, hold the release button while turning the cup counter-clockwise; lift it off and turn the Blade Block counter-clockwise to remove it.
6. Carry the assembly with both hands around the Pint Cup and Blade Block, never by the shaft; use the plastic grip after operation and cool a warm shaft under cool water before handling it.

1. After unplugging and waiting for all motion to stop, separate the Blade from the Blade Block before dishwashing.
2. Hand-wash the Pint Cup, lid, Blade, Blade Block and Shaft in warm soapy water or place them on the dishwasher top rack; use no heat/sanitise cycle, steel wool or abrasive cleaner.
3. When hand-washing, clean the circular Blade Block opening and around the shaft with a sponge and dish soap after every use.
4. Wipe the base with a damp mild-soapy cloth and brush around the cup mounting area if needed; keep liquid away from the drive shaft and centre opening. Do not dishwash the base.
5. Dry all parts, store unplugged and fit the Blade Cover or attach the blade assembly to the Pint Cup.
6. If storing the covered Blade Block in the base, turn it counter-clockwise to disengage it before lifting it out; never leave an uncovered blade on the base.

• For a pair of Chill Pint Cups with lids, check pack ANBD-2PC16CDB against the Chill product code on your appliance.

• For a Chill Blade Block with Cover, check replacement ANBD-BA053CDB and match the listing to your full Chill model.

1. If CHECK BLADE appears, remove the cup assembly and reset the shaft until the Blade rests against the Blade Block before refitting it gently.

• Choose the Limitless Chopping Blade or Reversible Slice/Shred Disc for the Work Bowl; use its Endless Chute and Slinger Disc for direct serving.
• Use only genuine attachments specifically for the Limitless Food Processor; match each replacement to the full product code on your appliance.
• Inspect each part before use and stop using and replace any damaged detachable bowl, blade or disc.

1. With the base unplugged, hold the Chopping Blade by its plastic top and press it down the Blade Adaptor to the bowl bottom; alternatively fit the reversible disc by its centre grip with the required side up.
2. Turn the Work Bowl Lid clockwise until its markings line up with the handle, then turn the bowl clockwise onto the base until it clicks; use only one cutting tool during operation.
3. For the Endless Chute, turn it clockwise onto the base, press the Slinger Disc into its bottom opening and fit the Slice/Shred Disc to the slinger stem before locking the lid.
4. Clean the removable bowl, lid, pusher, adaptor, blade, disc, chute and slinger after use with warm soapy water or on the dishwasher top rack up to 82°C.
5. Do not use heat/sanitise cycles, steel wool or hard scouring materials; never microwave an attachment.
6. Wipe the unplugged Motor Base with a damp soapy cloth and clean the actuator area with a small brush if needed. NEVER submerge the motor base in water. Do not dismantle the base.
7. Store the Chopping Blade on the adaptor with the disc above it, lock the lid and insert the pusher; store the Endless Chute and Slinger Disc separately with cutting edges covered.

• For the original Baby Short Cup, observe the 180 ml MAX blending line even though total capacity is 295 ml; use cooled food and liquid only.
• For the original Baby Batchbowl, stay below its 475 ml MAX blending line even though total capacity is 945 ml; for warm ingredients, secure both the lid and vented lid cap.
• Use the Stay-Fresh Resealable Lid, Date-Dial Storage Cups and Tip-Proof Tray for storage, and the Easy-Pop Freezer Tray with its lid for freezing.
• Do not substitute attachments from another model; use the NutriBullet Baby model and original part name when selecting a replacement.

• Inspect the Extractor Blade before every use and check its gasket is fully seated; do not remove or replace the gasket separately.
• Replace the complete Extractor Blade if the gasket is loose, damaged or removed, or if the blade is loose or damaged; the guide recommends blade replacement every six months. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
• With the base unplugged, hand-tighten the Extractor Blade securely onto the Short Cup or Batchbowl before fitting the vessel to the base.
• Stop using and replace a warped or damaged plastic accessory; do not expose Baby parts to boiling water, steam sterilisation or rapid extreme temperature changes.

1. Hand-wash the blade and leave its gasket fitted; keep the blade out of the dishwasher because hot water can damage the seal.
2. Wash cups and the Batchbowl on the dishwasher top rack or by hand in warm soapy water, then rinse.
3. For dried food in a cup, fill halfway with soapy water, attach the blade and blend for 10–20 seconds. Stop, unplug and wait for the blade to stop; remove the cup assembly from the base, turn it upright with the blade on top and unscrew the blade before pouring out the water. Lightly scrub and rinse away the remaining food.
4. Wipe the unplugged Motor Base inside and out with a damp cloth.
5. Use cold-water sterilisation tablets if sterilising accessories; do not microwave any Baby component or use hot-water or steam sterilisation.
6. For refrigerated food, remove the blade and fit a storage lid; fill Date-Dial Cups no more than two-thirds full and use the dial to record the preparation date.
7. Keep Date-Dial Cups out of the freezer; use the Easy-Pop Freezer Tray and lid for frozen portions, and do not use the Batchbowl for storage.
8. Use refrigerated food within two days and frozen purées within three months; never store an exposed blade on the Motor Base.

• For the Baby NBY-1807 date-dial storage cups and tray, check NBY-1901CDB.
• For a Baby NBY-1807 short cup with handles, check NBY-0205CDB and read the replacement cup’s own fill markings.
• For the Baby NBY-1807 freezer tray, check NBY-0202CDB.
• For a Baby NBY-1807 batch bowl with lid, check NBY-0306CDB and the pieces included in the listing.
• For a complete Baby NBY-1807 blade replacement, check NBY-BA029CDB. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).

• Choose only attachments intended for the Baby Steam + Blend; do not fit a damaged Blending Blade or use the Work Bowl as a serving cup.
• Keep the Blending Blade and Blade Holder together when identifying a replacement; the blade lifts vertically off its holder, while the holder is removed by rotating its bottom.
• For steaming alone, the Blending Blade is optional; its drainage holes help keep excess water separate from steamed ingredients.

1. Unplug and let the appliance cool for at least ten minutes, with all moving parts stopped, before disassembly or changing attachments.
2. Lower the Blending Blade vertically onto the Blade Holder in the centre of the Work Bowl until secure.
3. Twist the Work Bowl Lid clockwise to close; align the black bowl arrow with the base Unlock icon, hold the base and turn the bowl counter-clockwise to lock.
4. Turn the Water Reservoir Cap clockwise to seal it, filling the reservoir only when the appliance is cool and off.
5. Keep food below MAX and the pour-spout vents clear; do not put food or liquid inside the Work Bowl Lid assembly, and avoid sudden hot-to-cold temperature changes that can crack the bowl.
6. After cooling, turn the Work Bowl clockwise off the base, open the lid and lift the Blending Blade vertically using a mitt; do not touch its sharp edges.
7. To separate the lid for cleaning, turn the circular bottom grip counter-clockwise; remove trapped food or water and dry both pieces completely.

1. Wash the Work Bowl and lid before and after use with warm soapy water or on the dishwasher top shelf, then dry thoroughly.
2. Hand-wash the Blending Blade and Blade Holder with warm soapy water, clean inside the blade stem and dry fully; keep both out of the dishwasher.
3. Clean cooled parts promptly with a cloth or soft brush; soak stubborn dried food on detachable parts in hot water for 30 minutes before cleaning.
4. Empty remaining water from the reservoir after use and wipe the Motor Base with a damp cloth.
5. For limescale, let the appliance cool and empty the reservoir; add 240 ml white vinegar, leave for at least 30 minutes and up to 24 hours, then discard and rinse with cool water.
6. After descaling, run and discard fresh-water cycles several times and finish with the initial cleaning cycle; repeat if residue remains, and descale about every four weeks or sooner when buildup appears.
7. To run the initial cleaning cycle, fill the reservoir to the 25-minute line, secure its cap, run a Steam cycle, then unplug, cool fully and discard remaining water.
8. Keep the assembled appliance and its parts together in a cool, dry, safe place when unplugged; store leftover food upright in a separate tightly covered container and use within 48 hours.

• For the NBY07200 Baby Steam + Blend work bowl with lid, check assembly ANBYB9CDB and the pieces included before ordering.

1. If assembly produces six warning beeps, unplug, remove and refit the Work Bowl and lid so both are correctly locked before retrying.