No. NutriBullet juicers do not need added water; the juice comes from the fruit and vegetables.
NutriBullet Juicer 800W
No, the NutriBullet Juicer 800W extracts juice from fruit and vegetables without added water or other liquid.
How do I get the juice to flow?
- Juice fruit and vegetables without adding water or other liquid; the juice comes from the produce itself.
- Wash produce, remove citrus rind and stone-fruit pits and cut pieces to fit the feed chute. Start the motor first; select LOW for softer produce and HIGH for harder produce, then feed gradually with the Food Pusher without forcing it.
- If juice extraction slows, stop and unplug, empty the full Pulp Basin and scrub the Sieve under running water with the Cleaning Brush; do not touch its sharp teeth. Refit the basin, Sieve and cover and lock the handle before restarting.
NutriBullet Juicer Pro 1000W
No, the NutriBullet Juicer Pro extracts juice from fruit and vegetables without added water or other liquid.
How do I get the juice to flow?
- Juice fruit and vegetables without adding water or other liquid; the juice comes from the produce itself.
- Wash and prepare produce, remove rind and pits and choose the right chute size with the Dual-Size Food Pusher. Start before feeding; use LOW for soft produce, HIGH for hard produce and TURBO for the toughest vegetables. Feed gradually without force, allowing each portion to clear the chute before adding more.
- If juice extraction slows, stop and unplug, empty the full Pulp Basin and scrub the Sieve under running water with the Cleaning Brush; do not touch its sharp teeth. Refit the basin, Sieve and cover and lock the handle before restarting.
NutriBullet Cold Press Slow Juicer
No, the NutriBullet Cold Press Slow Juicer extracts juice from fruit and vegetables without added water or other liquid.
How do I get the juice to flow?
- Juice fruit and vegetables without adding water or other liquid; the juice comes from the produce itself.
- Peel hard skins and citrus rind, remove pits and slice lower-moisture or hard-fibred produce. Cut long stems to 4-inch pieces, roll leaves and alternate soft produce with harder pieces; feed gradually with the Food Pusher without force.
- Do not add water as a substitute for juiceable produce such as apples or carrots. Avoid bananas, avocados and coconuts, and thaw frozen ingredients before juicing.
- After extracting juice, a little water through the feed chute may help loosen residue for disassembly. This is a cleaning step; switch OFF, unplug and wait for all parts to stop before taking the juicer apart.
NutriBullet Cold Press Batch Juicer
The juicing steps donโt include adding water: the juicer works with the juice inside your fruit and vegetables. Choose produce that has juice to extract.
Which produce gives enough juice?
- Do not juice low-water foods such as avocados, coconut, rhubarb and bananas. They lack the liquid the juicer needs and may cause it to clog.
- Never use foods with no juice to extract, or frozen fruit or vegetables.
- Rinse produce, peel as needed, remove citrus rind and large stone-fruit pits and seeds, then cut pieces small enough to fit the Hopper without forcing.
How do I get the juice to flow?
- Add ingredients to the Hopper, then close the Lid and turn the dial to ON.
- Open the Juice Spout Cover to release juice into the Juice Cup. Pulp goes into the Pulp Cup.
- If the Juicing Bowl gets too full, open the Juice Spout Cover and keep juicing.
- Use only the 2-in-1 Pusher and Scraper Tool to push food down. Never use your hands, fingers or other tools.
NutriBullet Juicer 800W 2.0
The NutriBullet Juicer 800W 2.0 guide does not explicitly say whether water must or may be added; it describes extracting liquid from juicy fruit and vegetables.
The NutriBullet Juicer 800W 2.0 extracts liquid from juicy fruit and vegetables. Avoid bananas, avocados, coconut and rhubarb: their low water content can clog the juicer.
How do I prepare the produce and let juice flow?
- Wash the produce, remove citrus rind and stone-fruit pits, and remove apple seeds. Cut pieces to fit the Feed Chute without forcing them.
- Fit the Juice Pitcher under the No-Drip Spout and point the spout down. Select I or II with the Dial Ring, then press the centre Power Button before feeding produce.
- Feed gradually with the Food Pusher, allowing each portion to pass into the Sieve before adding more. Do not force food down the chute.
Still need help? Chat with us and give us your model name and product code.