Select a cooking program or set the temperature and time with the controls, then press Start/Stop or Start/Pause to begin; use the same start control to pause before opening a basket.
Applies to
- NutriBullet CrispLite Air Fryer 6L
- NutriBullet XXL Digital Air Fryer 7L
- NutriBullet Twin Drawer Air Fryer
- NutriBullet CrispLite Vision Air Fryer 8L
- NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L
NutriBullet CrispLite Air Fryer 6L
Press Power, choose a cooking program with Menu, adjust it with Temp/Time and +/− if needed, then press Start/Stop to begin or pause the selected program.
- Fit the 3-in-1 Reversible Grill, Pizza, & Crisping Tray level in the Cooking Basket, add food with at least 50 mm of space above it, and push the basket fully into the Base. Plug in and press Power. NEVER submerge the main unit in water.
- Press Menu until the program you want flashes; its default time and temperature appear on the display.
- Press Temp/Time and use +/− to set the temperature; press Temp/Time again and use +/− to set the cooking time. Each press changes time by 1 minute or temperature by 5°C.
- Press Start/Stop (Start/Pause) to begin. You can adjust time or temperature during cooking.
- Press the start control to pause, wait for cooking to stop, then pull the basket out by its handle. Turn food with a utensil, refit the basket securely and press the start control again to resume. Keep your face and hands away from steam; use oven gloves for the hot basket and tray.
- At the end, listen for 3 beeps and wait a few seconds for cooking to stop. Lift food out with a utensil, then hold Power until the air fryer switches off.
Which default settings can I select?
| Program | Temperature | Time |
|---|---|---|
| Fries | 200°C | 20 minutes |
| Chicken | 180°C | 30 minutes |
| Steak | 200°C | 16 minutes |
| Bake | 160°C | 16 minutes |
| Vegetable | 180°C | 16 minutes |
| Seafood | 180°C | 16 minutes |
How do I reset the settings?
Hold Power for 5 seconds while cooking to reset the settings.
Why did the panel turn off?
The air fryer switches off after 5 minutes of inactivity with the basket inserted, or 10 minutes with the basket removed. A paused cycle also switches off after 10 minutes without activity.
NutriBullet XXL Digital Air Fryer 7L
Press Power, choose a program with Menu and press Start/Stop to cook; use Temperature/Time and +/− to change the settings, pausing first when a program is running.
- Fit the crisping tray and loaded Cooking Basket fully into the Base; the air fryer cannot operate with the basket incorrectly seated. Leave 50 mm above the food, connect power and press Power to display the controls. NEVER submerge the main unit in water.
- Press Menu until the desired program flashes; its default settings appear. Press Start/Stop to begin that program, or adjust the settings first.
- For manual cooking, press Menu, then Temperature/Time. When the temperature flashes, use +/− to adjust it; press Temperature/Time again and set the duration with +/−. Press Start/Stop to start.
- Press Start/Stop to pause before changing a running program. Press Temperature/Time to select the flashing temperature or time reading, change it with +/− and press Start/Stop to resume.
- Pause with Start/Stop before removing the basket by its handle. Turn food with a utensil, refit the basket and resume with Start/Stop; the timer may add time while the fryer restores its temperature. Keep clear of hot steam.
- When 5 beeps sound, wait a few seconds for the cooking action to stop before opening the basket. Remove food with a utensil rather than your hands.
Which default settings can I select?
| Program | Temperature | Time |
|---|---|---|
| Fry | 200°C | 15 minutes |
| Pork & Lamb Chops | 200°C | 20 minutes |
| Bake | 180°C | 30 minutes |
| Poultry | 200°C | 20 minutes |
| Fish | 200°C | 12 minutes |
| Steak | 200°C | 25 minutes |
| Dried Fruit | 30°C | 4 hours |
| Shellfish | 180°C | 12 minutes |
How do I cancel or wake the fryer?
Hold Power to cancel: the time and temperature flash and the fryer beeps as it powers down. After 30 seconds the Power button reappears; press it to return to the main screen. After 10 minutes idle the fryer enters standby; a Power press wakes it.
NutriBullet Twin Drawer Air Fryer
Select L or R, choose the drawer’s program with Menu and adjust time or temperature with +/−, then press Start/Stop to begin or pause; SYNC applies the same mode and settings to both drawers.
- Seat each Crisping Tray flat in its Cooking Drawer. Add food, keeping 50 mm clear above it, and push the drawers fully into the Base; incorrectly seated drawers prevent operation. NEVER submerge the main unit in water.
- Press L or R for the drawer you want to set. Press SYNC when both drawers should use the same mode and settings.
- Press Menu until your preferred mode is fully illuminated and the other modes dim. Its default time and temperature load for the selected drawer; use the Time/Temperature Select buttons to view them.
- Select time or temperature, then use +/− to adjust it before or during cooking. Temperature changes in 5°C steps; most modes change time in 1-minute steps from 1–60 minutes. Dried Fruit changes in 15-minute steps from 1–12 hours.
- Press Start/Stop. Only the chosen mode remains lit and the drawer’s cooking indicator lights. Set the other drawer separately if it needs different settings.
- Press Start/Stop to pause before removing a drawer by its handle. Turn food with a utensil, refit the drawer and press Start/Stop to resume. Removing a drawer also pauses cooking until it is reinserted; keep your face and hands clear of steam and splashes.
- At completion, listen for 5 beeps and wait a few seconds before removing food with a utensil. To cancel early, select L or R and hold Start/Stop for 3 seconds until that drawer’s display switches off.
Which default settings can I select?
| Program | Temperature | Time |
|---|---|---|
| Fry | 200°C | 20 minutes |
| Steak | 200°C | 12 minutes |
| Fish | 200°C | 12 minutes |
| Shellfish | 180°C | 12 minutes |
| Poultry | 200°C | 25 minutes |
| Bake | 180°C | 12 minutes |
| Veggie | 160°C | 16 minutes |
| Dried Fruit | 50°C | 5 hours |
How do I wake the controls?
After 5 minutes without a selection, the fryer enters standby. Hold L, R or SYNC to wake it.
NutriBullet CrispLite Vision Air Fryer 8L
Press Power, choose a program with Menu and adjust its settings with the temperature and time controls, then press Start/Stop to begin or pause cooking.
- Fit the 3-in-1 Reversible Grill, Pizza, & Crisping Tray level in the Cooking Basket, add food with at least 50 mm of space above it, and push the basket fully into the Base. Plug in and press Power. NEVER submerge the main unit in water.
- Press Menu until the program you want flashes; its default time and temperature appear on the display.
- Use Temperature Increase/Decrease to set the heat, then Time Increase/Decrease to set the duration. Each press changes time by 1 minute or temperature by 5°C.
- Press Start/Stop (Start/Pause) to begin. You can adjust time or temperature during cooking.
- Press the Light icon to see inside the basket; press it again to switch the light off. It also turns off automatically after 1 minute.
- Press the start control to pause, wait for cooking to stop, then pull the basket out by its handle. Turn food with a utensil, refit the basket securely and press the start control again to resume. Keep your face and hands away from steam; use oven gloves for the hot basket and tray.
- At the end, listen for 3 beeps and wait a few seconds for cooking to stop. Lift food out with a utensil, then hold Power until the air fryer switches off.
Which default settings can I select?
| Program | Temperature | Time |
|---|---|---|
| Fries | 200°C | 20 minutes |
| Chicken | 180°C | 30 minutes |
| Steak | 200°C | 16 minutes |
| Bake | 160°C | 16 minutes |
| Vegetable | 180°C | 16 minutes |
| Seafood | 180°C | 16 minutes |
| Shellfish | 200°C | 16 minutes |
| Dehydrate | 50°C | 5 hours |
How do I reset the settings?
Hold Power for 5 seconds while cooking to reset the settings.
Why did the panel turn off?
The air fryer switches off after 5 minutes of inactivity with the basket inserted, or 10 minutes with the basket removed. A paused cycle also switches off after 10 minutes without activity.
NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L
Press Power, select the basket and cooking program, adjust temperature and time, then press Start/Pause to run or pause; use SYNC for different cycles that finish together or Dual Basket for matching settings.
- Fit the Crisping Tray level in each Cooking Basket; if using a Wire Rack, place it above the tray with handles up. Leave 50 mm above food, fully seat the baskets, plug in and press Power after the display’s 1-second startup. NEVER submerge the main unit in water.
- Press Upper Basket or Lower Basket; the chosen indicator flashes. Hold that basket button for 2 seconds to cancel the selection.
- For independent cooking, select and set each basket separately. For different cooking times that finish together, press SYNC: the shorter cycle starts later. For the same parameters in both baskets, select Dual Basket, set the parameters and press Start.
- Press the desired cooking program icon; it flashes during selection and stays lit once cooking begins. When both baskets use the same preset, only one program icon may be shown.
- Use Temp Increase/Decrease first, then Time Increase/Decrease; press Start/Pause to cook. Use Start/Pause again to pause or resume the cycle.
- Press Light to switch the interior light on or off; the light switches off automatically after 15 seconds.
- Use the Shake button to enable or disable the reminder. The flashing indicator and beep do not stop cooking. Pause before removing the basket, shake or turn food, then refit it to clear the alert and resume; use oven gloves for the hot basket, tray and rack and keep clear of steam. Basket removal itself also pauses cooking until reinsertion.
- At the end of cooking, listen for 3 beeps and wait a few seconds. Remove food with a utensil, then hold Power until the fryer switches off.
Which default settings can I select?
| Program | Temperature | Time |
|---|---|---|
| Fries | 200°C | 20 minutes |
| Steak | 200°C | 15 minutes |
| Seafood | 180°C | 15 minutes |
| Chicken | 180°C | 30 minutes |
| Bake | 160°C | 15 minutes |
| Pizza | 160°C | 20 minutes |
| Vegetables | 180°C | 15 minutes |
| Dehydrate | 50°C | 5 hours |
| Reheat | 160°C | 10 minutes |
You can adjust most programs from 80–200°C for 1–60 minutes. Bake uses 80–170°C for the same time range. Dehydrate uses 40–70°C for 1 minute–24 hours.
When does standby start?
Press Power to enter standby, or allow 10 minutes without activity.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet CrispLite Air Fryer 6L user guide
The full steps for this model are in its user guide: NutriBullet XXL Digital Air Fryer 7L user guide
The full steps for this model are in its user guide: NutriBullet Twin Drawer Air Fryer user guide
The full steps for this model are in its user guide: NutriBullet CrispLite Vision Air Fryer 8L user guide
The full steps for this model are in its user guide: NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L user guide