The NutriBullet Baby NBY-1807 container may not fit correctly if the blade is misaligned, a cup tab is damaged, a part is warped or the attachment is unsuitable. Open the matching question below to check the fit; if the container remains jammed, leave the base unplugged.
NutriBullet Baby
Is the container partly engaged or incorrectly fitted?
- Unplug the motor base before handling the container; wait until all parts have stopped moving.
- If the container has partly engaged, gently turn the assembly anticlockwise and lift it off only if it releases normally. Stop if it remains jammed.
- Check all three cup tabs, the blade attachment and the accessible base recess for damage or food deposits.
- Clean the base with a damp cloth and wash the detached container and blade; allow the cleaned base and parts to dry.
- Hand-tighten the extractor blade onto the Short Cup or Batchbowl, check that it is aligned, and place the complete assembly squarely on the motor base. With the Batchbowl, fit the lid firmly before use.
- Push down and turn clockwise to engage the assembly. If it still will not fit after the checks below, leave the motor base unplugged and ask for help rather than forcing it.
Is the extractor blade squarely fitted to the container?
- Lift the container off the unplugged base before adjusting the blade. Unscrew and refit the extractor blade onto the Short Cup or Batchbowl, tightening it securely by hand.
- Check that the blade attachment is aligned before placing the assembly onto the motor base; the container and blade must fit together securely before you push down and twist.
- If the blade will not sit correctly or is loose or damaged, stop using it and replace the blade attachment. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Does the motor base need cleaning before refitting?
- With the motor base unplugged and the container removed, wipe the accessible inside and outside surfaces of the base with a damp cloth.
- Wash food residue from the detached cup or Batchbowl and hand-wash the blade, then let everything dry completely.
- After cleaning and drying, use the fitting sequence in the first question; if the container still catches, leave the base unplugged for help.
Are all three cup tabs intact?
- Look around the cup for each of the three tabs. Check for missing or broken tabs before trying to engage the base.
- Replace a cup with a damaged tab; do not keep pushing it into the motor base or attempt to defeat the interlock mechanism.
Has hot-water or steam sterilising changed the shape of a part?
- Check the container and blade housing for distortion after exposure to steam, boiling water or rapid temperature changes. Heat can warp Baby plastic accessories.
- Stop using a warped or damaged detachable part and replace it; reheating or forcing it onto the base is not a repair.
- For future cleaning, hand-wash in warm soapy water or use the top rack for cups and Batchbowl; do not put the blade in the dishwasher.
Are you trying to fit a storage cup or an attachment from another appliance?
- Use the Short Cup or Batchbowl with the Baby extractor blade. The Date-Dial Storage Cups and freezer tray are storage accessories and must not be fitted to the motor base.
- Check that the replacement attachment is for NutriBullet Baby NBY-1807 before another attempt; use only the attachments intended for this Baby blender.
Is the blade seal missing, loose or damaged?
- Inspect the blade attachment before refitting it. The seal stays in the blade; it is not a part to remove during cleaning.
- If the seal has been removed or the blade is loose or damaged, stop using the blade attachment and replace it. Do not try to compensate by tightening the container harder. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet Baby NBY-1807 user guide (PDF)