Store the appliance and its parts together in a safe place, using the specified assembled or covered arrangement to protect attachments; where the guide requires it, dry the parts fully and keep the appliance upright with nothing on top.
NutriBullet Immersion Blender 800W
Store the dry NutriBullet Immersion Blender 800W and its attachments in a safe, dry place where they cannot be damaged or cause harm.
How should I prepare the appliance and store its attachments?
- Release the speed button, unplug and wait until the blade or whisk stops. Lift the arm or whisk out of the mixing vessel, detach the Motor Body and separate the Whisk from its holder or the Chopping Blade and Lid from the bowl; the Blending Arm stays as one piece.
- Empty the cup or Chopping Bowl. Wash the Chopping Bowl, Whisk, Blending Cup and Chopping Blade in warm soapy water or the dishwasher. Handle sharp edges carefully and remove food residue from the blade and whisk after each use.
- Clean the Whisk Holder, Chopping Bowl Lid and Blending Arm with warm soapy water; do not soak them or put them in a dishwasher because their internal gears can be damaged. Do not use a metal sponge.
- Wipe the Motor Body with a damp cloth only. NEVER submerge the main unit in water.Clean food residue promptly. For dried residue on other washable parts, soak in hot water for 30 minutes. Keep the Chopping Bowl Lid, Whisk Holder and Blending Arm out of that soak.
- Let every part dry thoroughly, then store the blender and attachments in a safe, dry place where they will not be damaged or cause harm.
NutriBullet EveryGrain Cooker
Store the cooled NutriBullet EveryGrain Cooker upright in a cool, dry location with its accessories and Power Cord.
How should I prepare the appliance and store its attachments?
- End the program, remove food with the supplied Spatula or another non-metal utensil, switch off and unplug. Let the appliance and inner heating plate cool completely to room temperature before cleaning or moving.
- Empty remaining food from the Cooking Pot and Steaming Basket. Hand-wash the Cooking Pot in warm soapy water to protect its coating; wash the basket, Spatula and Measuring Scoop in warm soapy water or the dishwasher. Soak the pot if food sticks.
- Wipe the Sealing Panel and Condensation Collector with a damp cloth or sponge and warm soapy water. Remove the Steam Vent plug and rinse it with warm water; wipe inside the vent with a damp cloth. Clean these after each use.
- Wipe the cooled heating plate and Cooker Base with a clean, damp cloth. NEVER submerge the main unit in water. Do not use steel wool on the Cooking Pot, Sealing Panel or other parts.
- Store the cooled cooker upright in a cool, dry location and keep the accessories and Power Cord with it.
NutriBullet Food Processor
Store the NutriBullet Food Processor blades and permitted discs on the adaptor inside the Work Bowl in their storage positions, with the lid covering sharp edges and the cord wrapped underneath the Motor Base.
How should I prepare the appliance and store its attachments?
- Press OFF, unplug and wait for every attachment to stop before handling. Detach the blades and other attachments from the Motor Base.
- Clean the Blade Adaptor, Chopping Blade, Dough Blade, Slice/Shred Discs, Spiralizer Disc, Work Bowl, Lid and Dual-Size Food Pusher after each use. Hand-wash in warm soapy water or use the dishwasher’s top rack. Do not use the sanitise cycle, steel wool or hard scratching materials. Handle blade edges carefully.
- Wipe the Motor Base with a sponge or cloth dampened with warm soapy water. Use a small brush on the actuator area if needed, while unplugged. Do not remove base pieces.
- Place the Blade Adaptor on the Work Bowl’s centre shaft. Lower the Chopping Blade onto the shaft, then the Dough Blade above it. This stacking is for storage; never operate with multiple blades fitted.
- Choose either two Slice/Shred Discs or one Slice/Shred Disc plus the Spiralizer Disc; all discs will not fit together. Lower the slice/shred discs into the lower storage position; the disc and adaptor lines must not align as they would for operation.
- If storing the Spiralizer Disc, place it last. Align its notches with the upper storage tabs and rotate it so FRONT faces the front of the base; check that the disc is seated on the blade/adaptor assembly.
- Lock the Work Bowl Lid and nest the Dual-Size Food Pusher in the Feed Chute. Wrap the cord underneath the Motor Base to keep it tucked away.
NutriBullet Chill
Store the clean, dry NutriBullet Chill unplugged with the Blade Cover fitted or the Blade attached to the Pint Cup, keeping any Blade Block on the base covered.
How should I prepare the appliance and store its attachments?
- Unplug and wait for all moving parts to stop. Remove the Blade from the Blade Block before washing; handle the sharp blade by safe, non-cutting areas.
- Wash the Pint Cup, Lid, Blade, Blade Block and Shaft in warm soapy water or on the dishwasher’s top rack. For hand-washing, gently clean the Blade Block’s circular opening and around the Blade Shaft with a sponge and dish soap. Do not use the sanitise cycle, steel wool or abrasive cleaners.
- Wipe the Motor Base with a damp sponge or cloth and mild soapy water. A cleaning brush can remove residue around the top where the Pint Cup attaches. Keep liquid away from the drive shaft and centre hole. Do not put the motor base in the dishwasher.
- Ensure all parts are clean and dry. Store unplugged with the Blade Cover properly fitted to the Blade, or attach the Blade to the Pint Cup. Never leave an exposed Blade Block on the Motor Base.
- If storing the Blade Block in the base, fit the Blade Cover on top. Clockwise blade rotation can engage it; when taking it out later, turn the Blade anticlockwise to disengage before lifting the block.
NutriBullet Limitless Food Processor
Store the NutriBullet Limitless Food Processor Chopping Blade and Slice/Shred Disc on the adaptor inside the locked Work Bowl with sharp edges covered, and keep the Endless Chute and Slinger Disc separately.
How should I prepare the appliance and store its attachments?
- Slide the toggle to OFF, unplug and wait for all parts to stop before detaching the blades and other attachments. Keep sharp blades and discs covered when they are not being handled.
- Clean the Work Bowl, Lid, Food Pusher, Blade Adaptor, Chopping Blade, Reversible Slice/Shred Disc, Endless Chute and Slinger Disc after each use. Hand-wash with warm soapy water or use the top dishwasher rack up to 82°C. Do not use a heat/sanitise cycle, steel wool or hard scratching materials.
- Wipe the Motor Base with a sponge or cloth dampened with warm soapy water; use a small brush on the actuator area if needed. Do this only while unplugged. Do not remove pieces from the motor base.
- Lower the Chopping Blade onto the Blade Adaptor in the Work Bowl, then lower the Reversible Slice/Shred Disc onto the adaptor above it. This is a storage stack; never run the motor with more than one cutting attachment.
- Lock the Work Bowl Lid and nest the Food Pusher in the Feed Chute. Store the Endless Chute and Slinger Disc separately. Keep all sharp edges covered with the appropriate lid or cover.
NutriBullet Baby
Store the NutriBullet Baby Extractor Blade attached to a cup or vessel whenever it is on the Motor Base, so the blade is covered.
How should I prepare the appliance and store its attachments?
- Unplug and wait for all moving parts to stop before separating the blending vessel and blade from the Motor Base. Do not store an uncovered Extractor Blade on the base; keep it attached to a cup or vessel when it is on the base.
- Empty the food into its storage container. Wash the cups and Batchbowl on the dishwasher’s top rack or by hand with warm soapy water. Hand-wash the Extractor Blade; never put it in the dishwasher or remove its seal.
- For stuck cup residue, fill the cup halfway with soapy water, attach the blade and blend for 10–20 seconds. Stop, unplug, remove the blade, empty, scrub gently and rinse.
- Wipe the inside and outside of the unplugged Motor Base with a damp cloth. Do not use boiling water, steam or a microwave to sterilise any components; use only cold-water sterilisation options such as suitable dissolvable tablets.
- Keep the cord away from hot surfaces and out of a position where it hangs over a counter edge. Replace a blade with a removed or damaged seal rather than refitting the seal yourself. Buy a replacement extractor blade (Australia) or extractor blade (New Zealand).
NutriBullet Baby Steam + Blend
Keep all NutriBullet Baby Steam + Blend pieces together and store the assembled appliance unplugged in a cool, dry, safe place.
How should I prepare the appliance and store its attachments?
- Turn off, unplug and allow at least ten minutes and complete cooling before taking apart. Wait for the motor and blade to stop, hold the Work Bowl handle and twist clockwise to unlock it from the Motor Base.
- Open the Work Bowl Lid. Separate its two pieces by twisting the circular bottom grip anticlockwise. Lift the Blending Blade vertically by a non-sharp area, using a mitt while it is still warm; remove food from the bowl and empty remaining water from the Water Reservoir.
- Rinse the Work Bowl, Lid and Blade; wash the bowl and lid in warm soapy water or the dishwasher’s top shelf. Hand-wash the Blending Blade and Blade Holder, then dry thoroughly. Rotate the bottom of the Blade Holder to remove it, and clean inside the Blade Stem so no food or water remains.
- Wipe the entire Motor Base with a clean, damp cloth only. Clean cooled parts promptly; if residue dries, soak the washable part in hot water for 30 minutes and use a cloth or soft-bristle brush to loosen it.
- If limescale has built up, descale the cooled Water Reservoir before storage: discard water, add 240 mL white vinegar or a suitable chemical-free descaler and leave for at least 30 minutes, up to 24 hours as needed. Discard, rinse with cool water, boil fresh water several times and discard it; repeat if residue remains, then run the initial cleaning cycle. The guide recommends descaling every four weeks or sooner when buildup appears; filtered water helps reduce buildup.
- Keep all pieces together and store the assembled appliance unplugged in a cool, dry, safe place where it will not be damaged or cause harm.
NutriBullet Triple Prep System
Store the NutriBullet Triple Prep System upright with nothing on top and its processor blades and disc inside the covered Work Bowl.
How should I prepare the appliance and store its attachments?
- Power off, unplug and wait for the motor to stop, then detach the Cup, Pitcher or Work Bowl. Remove processor Blades, Discs and Blade Adaptor before washing the bowl.
- Clean the Extractor Blade with a small brush or sponge and soapy water. Hand-wash the Tamper. The Pitcher, Pitcher Lid, Work Bowl, Work Bowl Lid, Blade Adaptor, blade attachments, cups, Food Pusher and To-Go Lids may be washed in the dishwasher after removing debris, or with soap and water. Do not use dishwasher heat/sanitise cycles.
- For stubborn cup/blade residue, add room-temperature water to the cup MAX line and one or two drops of dish soap; attach the blade and blend for 20–30 seconds. For the Pitcher, fill halfway with water plus one or two drops of dish soap and blend for the same time. Stop, unplug, scrub and rinse.
- Wipe the Motor Base with a warm sponge or cloth dampened with soapy water, and use a small brush on its actuator area. Keep ventilation openings clear and clean. Do not use boiling water, a microwave, oven, air fryer or stovetop pot to clean components.
- Store processor components in the Work Bowl: fit the Blade Adaptor to the centre shaft, then the Chopping Blade, Dough Blade and lastly the Slice/Shred Disc. Attach the lid to cover every sharp edge.
- Store the NutriBullet Triple Prep System upright with nothing on top, and keep accessories in a safe place. Check parts for cracks, cloudiness, warping, a blade that does not rotate freely, or a missing/damaged gasket; stop using a damaged detachable part and replace it with the correct genuine part.
Magic Bullet Kitchen Express 250W
Store all Magic Bullet Kitchen Express 250W pieces together in a safe place where they cannot be damaged or cause harm.
How should I prepare the appliance and store its attachments?
- Turn the power control knob to OFF, wait for all parts to stop and unplug the Motor Base.
- For the Work Bowl, turn it anticlockwise to detach it from the Motor Base and set it on a clean, dry, flat surface. Turn the Lid anticlockwise to unlock it. Carefully lift out the Chopping Blade before pouring food from the bowl; if using the Disc Blade, lift it out by the two larger finger holes first.
- For the Tall Cup, turn the Cup/Cross Blade assembly anticlockwise to remove it from the Motor Base. Turn it upright, twist off the Cross Blade and empty the cup before cleaning.
- Wash all parts except the Motor Base by hand in warm soapy water and rinse, or put them on the dishwasher’s top rack. Do not use the sanitise cycle, which can warp cups or the bowl. Handle blades carefully; use the two larger finger holes to lift the disc.
- Wipe the Motor Base with a damp cloth or sponge. While unplugged, use a small brush to remove dried residue around the actuator tabs if needed. Do not remove any base pieces.
- Store all pieces together in a safe place where they will not be damaged or cause harm.
NutriBullet Ultra Plus+ Compact Kitchen System
Store the NutriBullet Ultra Plus+ Compact Kitchen System upright in a cool, dry, clean place with nothing on top, the cord tucked away and sharp attachments covered.
How should I prepare the appliance and store its attachments?
- Power off, unplug and wait for all blades to stop. Detach the cup, Processor Attachment or Grinder Attachment before cleaning; never put a partly assembled blade assembly on the Motor Base.
- Rinse the Rapid Extractor Blade in warm soapy water and brush or sponge off residue. Wash Cups and To-Go Lids on the top rack, first removing food debris. For stuck cup/blade residue, add room-temperature water to MAX plus one or two drops of dish soap, blend for 20–30 seconds, then stop, unplug and wash.
- Disassemble the Processor Attachment in reverse assembly order. Wash Blades, Discs, Work Bowl and Lid on the dishwasher’s top rack or by hand with a sponge/cloth, soap and water. Hand-wash the Processor Base and Blade Adapter; do not put these two parts in the dishwasher. Soak stubborn blade/disc residue in room-temperature water and one or two drops of dish soap for 20–30 seconds before scrubbing.
- For processor storage, fit the Blade Adapter to the Work Bowl centre shaft, add the Chopping Blade, then the Slice/Shred Disc. Hold the disc’s centre knob and do not align its marks with the adapter marks; lower it into the storage position about halfway down the shaft. Fit the Work Bowl Lid over all components so no sharp edges are exposed.
- Separate the Grinding Cup and Grinder Blade after removing the grinder. Wash them by hand with soap and water or on the dishwasher’s top rack. Empty the grinder before storing; do not use it as a food-storage container.
- Wipe the Motor Base with a damp sponge or cloth; use a small brush on the actuator area and keep ventilation clear. Avoid heat/sanitise dishwasher cycles and bottom-rack washing, and do not use microwaves, ovens, air fryers, stovetop pots or boiling water to clean components.
- Store the appliance upright with nothing on top in a cool, dry, clean place. Keep the cord safely tucked away and accessories secure; never leave an exposed Rapid Extractor Blade or Grinder Blade on the Motor Base.
NutriBullet CrispLite Air Fryer 6L
Store the fully dry NutriBullet CrispLite Air Fryer 6L assembled in a safe, dry location with nothing on top.
How should I prepare the appliance and store its attachments?
- Turn the air fryer off, unplug and let it cool thoroughly after use before cleaning or handling the cooking parts.
- Remove the Cooking Basket and 3-in-1 Tray. Wash them in warm soapy water or on the top rack of the dishwasher after every use. Do not use the sanitise cycle, which can warp plastic; keep the Base out of the dishwasher.
- Do not use abrasive or metal cleaning tools or oven cleaner on the removable cooking parts; these damage the non-stick coating.
- Gently wipe food residue from the Base’s inner wall with a warm cotton cloth, then dry with a dry cloth. Clean the Base interior and exterior by wiping with a damp cloth only. NEVER submerge the main unit in water. If food particles remain on the cold heating element, use a soft-medium bristle brush to remove them.
- Let all parts dry thoroughly, then store the air fryer fully assembled in a safe, dry location. Do not store anything on top of the appliance.
NutriBullet XXL Digital Air Fryer 7L
Store the fully dry NutriBullet XXL Digital Air Fryer 7L assembled in a safe, dry location.
How should I prepare the appliance and store its attachments?
- Turn the air fryer off, unplug and let it cool thoroughly after use before cleaning or handling the cooking parts.
- Remove the Cooking Basket and Crisping Tray. Wash them in warm soapy water or on the top rack of the dishwasher after every use. Do not use the sanitise cycle, which can warp plastic; keep the Base out of the dishwasher.
- Do not use abrasive or metal cleaning tools on the removable cooking parts; these damage the non-stick coating.
- Gently wipe food residue from the Base’s inner wall with a warm cotton cloth, then dry with a dry cloth. Clean the Base interior and exterior by wiping with a damp cloth only. NEVER submerge the main unit in water.
- Let all parts dry thoroughly, then store the air fryer fully assembled in a safe, dry location.
NutriBullet Twin Drawer Air Fryer
Store the fully dry NutriBullet Twin Drawer Air Fryer assembled in a safe, dry location.
How should I prepare the appliance and store its attachments?
- Turn the air fryer off, unplug and let it cool thoroughly after use before cleaning or handling the cooking parts.
- Remove the Cooking Drawers and Crisping Trays. Wash them in warm soapy water or on the top rack of the dishwasher after every use. Do not use the sanitise cycle, which can warp plastic; keep the Base out of the dishwasher.
- Do not use abrasive or metal cleaning tools on the removable cooking parts; these damage the non-stick coating.
- Gently wipe food residue from the Base’s inner wall with a warm cotton cloth, then dry with a dry cloth. Clean the Base interior and exterior by wiping with a damp cloth only. NEVER submerge the main unit in water.
- Let all parts dry thoroughly, then store the air fryer fully assembled in a safe, dry location.
NutriBullet CrispLite Vision Air Fryer 8L
Store the fully dry NutriBullet CrispLite Vision Air Fryer 8L assembled in a safe, dry location with nothing on top.
How should I prepare the appliance and store its attachments?
- Turn the air fryer off, unplug and let it cool thoroughly after use before cleaning or handling the cooking parts.
- Remove the Cooking Basket and 3-in-1 Tray. Wash them in warm soapy water or on the top rack of the dishwasher after every use. Do not use the sanitise cycle, which can warp plastic; keep the Base out of the dishwasher.
- Do not use abrasive or metal cleaning tools or oven cleaner on the removable cooking parts; these damage the non-stick coating.
- Gently wipe food residue from the Base’s inner wall with a warm cotton cloth, then dry with a dry cloth. Clean the Base interior and exterior by wiping with a damp cloth only. NEVER submerge the main unit in water. If food particles remain on the cold heating element, use a soft-medium bristle brush to remove them.
- Let all parts dry thoroughly, then store the air fryer fully assembled in a safe, dry location. Do not store anything on top of the appliance.
NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L
Store the fully dry NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L assembled in a safe, dry location with nothing on top.
How should I prepare the appliance and store its attachments?
- Turn the air fryer off, unplug and let it cool thoroughly after use before cleaning or handling the cooking parts.
- Remove the Cooking Baskets and Crisping Trays and Wire Racks. Wash them in warm soapy water or on the top rack of the dishwasher after every use. Do not use the sanitise cycle, which can warp plastic; keep the Base out of the dishwasher.
- Do not use abrasive or metal cleaning tools on the removable cooking parts; these damage the non-stick coating.
- Gently wipe food residue from the Base’s inner wall with a warm cotton cloth, then dry with a dry cloth. Clean the Base interior and exterior by wiping with a damp cloth only. NEVER submerge the main unit in water. If food particles remain on the cold heating element, use a soft-medium bristle brush to remove them.
- Let all parts dry thoroughly, then store the air fryer fully assembled in a safe, dry location. Do not store anything on top of the appliance.
Magic Bullet Air Fryer 2.5L
Keep the Magic Bullet Air Fryer 2.5L and all its parts together in a safe place where they cannot be damaged or cause harm, with the cord away from hot surfaces and counter edges.
How should I prepare the appliance and store its attachments?
- Turn both the Timer and Temperature Dial to 0, unplug and wait for frying to stop and the heating element to cool completely. Check that the orange indicator light is off before removing parts.
- Pull the Fry Pot out by its handle. Remove food scraps, lift the Crisping Tray by its centre handle and remove residue from the tray. Rinse both parts in hot soapy water after each use so food does not become stuck on.
- Wipe the Base exterior with a clean, damp cloth. NEVER submerge the main unit in water or another liquid.
- Keep all parts together in a safe place where they will not be damaged or cause harm. Keep the cord away from hot surfaces and from overhanging a counter edge.
Still need help? Chat with us and give us your model name and product code.
The full steps for this model are in its user guide: NutriBullet Immersion Blender 800W user guide (PDF)
The full steps for this model are in its user guide: NutriBullet EveryGrain Cooker user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Food Processor user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Chill user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Limitless Food Processor user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Baby user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Baby Steam + Blend user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Triple Prep System user guide (PDF)
The full steps for this model are in its user guide: Magic Bullet Kitchen Express 250W user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Ultra Plus+ Compact Kitchen System user guide (PDF)
The full steps for this model are in its user guide: NutriBullet CrispLite Air Fryer 6L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet XXL Digital Air Fryer 7L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet Twin Drawer Air Fryer user guide (PDF)
The full steps for this model are in its user guide: NutriBullet CrispLite Vision Air Fryer 8L user guide (PDF)
The full steps for this model are in its user guide: NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L user guide (PDF)
The full steps for this model are in its user guide: Magic Bullet Air Fryer 2.5L user guide (PDF)