Use the extractor blade for smoothies and other drinks made with liquid, and the milling blade for dry ingredients such as nuts, seeds and grains.
NutriBullet 500, 600, 900 and 1000 Series
Extractor blade
- The extractor blade is the blade for blending with liquid, for smoothies and other drinks.
- Always add liquid, and never run the blender with an empty cup.
- The blender is not an ice crusher. Do not crush ice or other hard items without liquid. Crushed ice can be up to 25% of the cup, with liquid filled to the MAX line.
- Do not blend for more than 1 minute at a time. Before another cycle, wait 2 to 3 minutes, check that the cup is not hot or warm, open it carefully to release any pressure, then tighten it again.
- Never blend hot ingredients or fizzy (carbonated) liquids in the cup.
- Do not use the extractor blade as a storage lid for the cup.
Milling blade
- The milling blade grinds nuts, seeds and grains. It has two flat blades with duller edges.
- Use it only with uncooked, dry or low-moisture ingredients, such as steel-cut oats and flax seeds.
- Do not add liquid.
- Do not use it with moist ingredients that can jam the blade, such as vegetables and soft cheeses.
- Do not grind spices or coffee. They can leave the cup cloudy, even after washing.
- Do not use it to make nut butter. To chop nuts, use short pulses.
- Do not run it for more than 1 minute. If the cup feels warm, let it cool before you open it, and open it pointing away from your body. Let the contents cool to room temperature before another cycle.
- The milling blade works best with the 18oz Short Cup.
Handle both blades with care; they are sharp.
The full steps for these models are in their user guide: NutriBullet 500, 600, 900 and 1000 Series user guide (PDF)
NutriBullet 700
- Some NutriBullet 700 packs include a milling blade. Use it for milling herbs, spices, grains and seeds.
The full steps for this model are in its user guide: NutriBullet 700 Series user guide (PDF)
Still need help? Chat with us and give us your model name and product code.