Skip to main content

How can we help?

How do I use the buttons and programs on my NutriBullet?

  • Updated

Use the control fitted to your appliance: select a labelled speed or program with its start/stop buttons, turn ON/OFF or a cooking dial on dial-operated appliances, or push and twist the cup to start cup-operated blenders and untwist it to stop.

If a step directs you to our team, or you need help with an unresolved issue, see our warranty article.

For recipe ideas, browse the official NutriBullet recipe libraries for Australia and New Zealand. Choose recipes for your exact machine and attachment, and follow your user guide’s hot-ingredient and ice limits.

NutriBullet Ultra 1200

Touch the solid circle for an automatic 30-second blend, or press the dashed circle for a pulse that stops when you release it.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
  2. Touch the solid circle to run the automatic 30-second blending program.
  3. Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
  4. After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.
  5. Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

NutriBullet 900 Series

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

NutriBullet 900 Essentials Set (AU and NZ)

Place the tightly sealed cup on the powered base, gently push down and twist to start blending, then push and untwist anticlockwise to stop.

  1. Plug in the base and place the loaded, tightly sealed cup upside down onto it.
  2. Gently push down and twist the cup to start blending.
  3. Push down and untwist anticlockwise to stop, wait for the motor and blades to stop completely, then lift off the cup and unplug before taking it apart.
  4. Do not run continuously for more than one minute.
What if the motor stops working?

Unplug the base and let it cool for at least 15 minutes before trying again; if the unit is damaged or malfunctions, stop using it and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase).

For spills or residue, see cleaning your blender.

NutriBullet 900 Mega Pack (AU and NZ)

Place the tightly sealed cup on the powered base, gently push down and twist to start blending, then push and untwist anticlockwise to stop.

  1. Plug in the base and place the loaded, tightly sealed cup upside down onto it.
  2. Gently push down and twist the cup to start blending.
  3. Push down and untwist anticlockwise to stop, wait for the motor and blades to stop completely, then lift off the cup and unplug before taking it apart.
  4. Do not run continuously for more than one minute.
What if the motor stops working?

Unplug the base and let it cool for at least 15 minutes before trying again; if the unit is damaged or malfunctions, stop using it and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase).

For spills or residue, see cleaning your blender.

NutriBullet 600 Series

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

NutriBullet Ultra 1000 / Ultra 1000 Premium

For Ultra 1000 Premium NB07500-1008, touch the solid circle for an automatic 30-second blend, or press the dashed circle for a pulse that stops when you release it.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
  2. Touch the solid circle to run the automatic 30-second blending program.
  3. Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
  4. After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.
  5. Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

For the Ultra 1000 Premium NB07500-1008 cup and Rapid Extractor Blade.

NutriBullet Select 1200 / 2.0 Select 1200

Press POWER, select LOW, HIGH or EXTRACT to blend, or hold PULSE for a burst; press the active speed/program or POWER to stop.

  1. After locking on the prepared vessel, press POWER; its light indicates the controls are ready.
  2. Choose LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruit. Choose HIGH for thick mixtures and frozen fruit or vegetables.
  3. Press EXTRACT for a smoothie from whole fruit, vegetables and ice with liquid; the program stops automatically at the end.
  4. For controlled chopping, press and release PULSE; hold it to keep the blades running and release it to stop. Do not use PULSE with hot ingredients.
  5. Press the active speed or EXTRACT button again, or POWER, to stop. The POWER light remains on in idle mode; press POWER and unplug to finish.
  6. Pitcher speeds continue until you stop them. For hot ingredients, use the vented pitcher with lid and cap fitted and start on LOW; never use the sealed cup.
  7. Cup speeds stop after 60 seconds; do not exceed one minute of continuous cup blending.
  8. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

NutriBullet Pro+ 1200 / Pro Plus 1200

Push and twist the sealed cup to start the 60-second automatic blend; for pulse control, press PULSE within five seconds, then hold it to blend and release it to stop.

  1. Push and twist the sealed cup onto the base to start the 60-second automatic blend; the blue light turns off at the end.
  2. For chunky salsa or coarse chopped onions, press PULSE within five seconds after starting the blend. The motor stops and the PULSE button flashes blue.
  3. Hold PULSE to turn the blades; release it to stop. Let the blades stop fully between pulses and repeat only until the desired texture is reached.
  4. Pulse mode times out after one minute. Twist the cup anticlockwise to the OFF position before restarting normal operation.
  5. Limit each run to one minute. After three one-minute intervals, let the motor base cool for 2–3 minutes before continuing; let a warm cup cool before opening it. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

NutriBullet Pro 1000 / 2.0 Pro 1000

For 2.0 Pro 1000 NB07100-1008DG, lock the sealed cup clockwise to start the one-minute automatic blend without a start button, or twist anticlockwise to stop it early.

  1. Lock the sealed cup clockwise onto the base to start the one-minute automatic extraction cycle; no separate start button is required.
  2. Twist the cup anticlockwise to stop early; wait until the blade has stopped before removing it.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

For the 2.0 Pro 1000 NB07100-1008DG cup and easy-twist extractor blade.

NutriBullet 1000 Series

To blend, turn the sealed cup upside down onto the motor base and gently push down and twist. To unlock it, gently push and untwist the cup anticlockwise.

How do I start and unlock it?
  • Twist the extractor blade onto the filled cup until it is tightly sealed, and plug the base in.
  • Turn the cup upside down onto the motor base, then gently push down and twist.
  • Wait until the motor has completely stopped, then gently push and untwist the cup anticlockwise to unlock it.
How long should I blend?
  • Do not blend continuously for more than one minute.
  • Before another cycle, let the contents settle for 2–3 minutes. Check the cup is not hot or warm, carefully open it to release pressure, then tighten it again.
Can I pulse by pressing the cup up and down?
  • This is not recommended. Pressing the cup and blade down and up on the actuators bypasses the cup-locking safety features.

NutriBullet Turbo 1000

Clockwise cup locking starts the automatic 45-second cycle without a start button; an anticlockwise twist stops it early.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
  2. To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
  3. For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.
  4. Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

NutriBullet 1000 Mega Pack / 1000 Series Mega Pack

For 1000 Mega Pack N10-1107AK, there is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Limit each blend to one minute. Before another cycle, wait 2–3 minutes, check that the cup is no longer warm, carefully open it to release pressure, then retighten the blade. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

For the 1000 Mega Pack N10-1107AK.

NutriBullet 1200 Series / 12 Piece

Push and twist the sealed cup to start the 60-second automatic blend; for pulse control, press PULSE within five seconds, then hold it to blend and release it to stop.

  1. Push and twist the sealed cup onto the base to start the 60-second automatic blend; the blue light turns off at the end.
  2. For chunky salsa or coarse chopped onions, press PULSE within five seconds after starting the blend. The motor stops and the PULSE button flashes blue.
  3. Hold PULSE to turn the blades; release it to stop. Let the blades stop fully between pulses and repeat only until the desired texture is reached.
  4. Pulse mode times out after one minute. Twist the cup anticlockwise to the OFF position before restarting normal operation.
  5. Limit each run to one minute. After three one-minute intervals, let the motor base cool for 2–3 minutes before continuing; let a warm cup cool before opening it. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

NutriBullet 1200 Series / 10 Piece

The controls include a pre-programmed Auto-Blast setting that pulses and shuts off automatically, and one-touch pulse.

NutriBullet 2.0 Pro 1200

Lock the sealed cup clockwise to start the one-minute automatic blend without a start button, or twist anticlockwise to stop it early.

  1. Lock the sealed cup clockwise onto the base to start the one-minute automatic extraction cycle; no separate start button is required.
  2. Twist the cup anticlockwise to stop early; wait until the blade has stopped before removing it.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

NutriBullet 500 Series / 4 Piece

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

NutriBullet 1000 Essentials McLaren

Gently push and twist the sealed cup clockwise to start blending, then twist anticlockwise to stop and unlock it.

  1. Fit the tightly sealed cup and extractor blade upside down onto the plugged-in motor base. Gently push down and twist clockwise to start blending.
  2. Twist the cup anticlockwise to stop and unlock it. Wait until the motor and blade have stopped completely before lifting the assembly off; unplug before taking it apart.
  3. Do not run continuously for more than one minute. Before another blend, let the contents settle for 2–3 minutes and make sure the cup is no longer warm. Carefully open it away from your body to release pressure, then securely refit the blade.
Can I pulse by pressing the cup up and down?

Do not repeatedly press the cup/blade assembly down and up on the actuators: this bypasses the cup-locking safety features.

What if the motor stops unexpectedly?

If there is damage, a burning smell, smoke or another malfunction, stop using the appliance and take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase). Otherwise, unplug the base and let it cool for at least 15 minutes to reset its thermal breaker. Let a warm cup cool before carefully opening it away from your body.

NutriBullet 700 Series

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Use no more than 45 seconds per interval and never exceed three consecutive 45-second intervals. Between cycles, stop completely, let a warm cup cool, carefully open it to release pressure and wait at least one minute. If the motor stops working, unplug and cool it for one hour.

NutriBullet Select 1000 / Select 1000 with pitcher

For the Select 1000 NB07200-1007DG blending cup, press POWER, select LOW, HIGH or EXTRACT to blend, or hold PULSE for a burst; press the active speed/program or POWER to stop.

  1. After locking on the prepared vessel, press POWER; its light indicates the controls are ready.
  2. Choose LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruit. Choose HIGH for thick mixtures and frozen fruit or vegetables.
  3. Press EXTRACT for a smoothie from whole fruit, vegetables and ice with liquid; the program stops automatically at the end.
  4. For controlled chopping, press and release PULSE; hold it to keep the blades running and release it to stop. Do not use PULSE with hot ingredients.
  5. Press the active speed or EXTRACT button again, or POWER, to stop. The POWER light remains on in idle mode; press POWER and unplug to finish.
  6. Cup speeds stop after 60 seconds; do not exceed one minute of continuous cup blending.
  7. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

For Select 1000 NB07200-1007DG with its blending cup.

NutriBullet Pro+ Matte Black

Push and twist the sealed cup to start the 60-second automatic blend; for pulse control, press PULSE within five seconds, then hold it to blend and release it to stop.

  1. Push and twist the sealed cup onto the base to start the 60-second automatic blend; the blue light turns off at the end.
  2. For chunky salsa or coarse chopped onions, press PULSE within five seconds after starting the blend. The motor stops and the PULSE button flashes blue.
  3. Hold PULSE to turn the blades; release it to stop. Let the blades stop fully between pulses and repeat only until the desired texture is reached.
  4. Pulse mode times out after one minute. Twist the cup anticlockwise to the OFF position before restarting normal operation.
  5. Limit each run to one minute. After three one-minute intervals, let the motor base cool for 2–3 minutes before continuing; let a warm cup cool before opening it. If the motor stops unexpectedly, unplug and cool it for at least 15 minutes.

NutriBullet 600 Essentials Kit

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

For the extractor-blade cup supplied with this Essentials Kit.

NutriBullet Ultra 1200 McLaren / Club Pack

For Ultra 1200 McLaren NB07500-1206GO-MC, touch the solid circle for an automatic 30-second blend, or press the dashed circle for a pulse that stops when you release it.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
  2. Touch the solid circle to run the automatic 30-second blending program.
  3. Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
  4. After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.
  5. Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

For Ultra 1200 McLaren NB07500-1206GO-MC.

NutriBullet Ultra 1200 Premium

Touch the solid circle for an automatic 30-second blend, or press the dashed circle for a pulse that stops when you release it.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
  2. Touch the solid circle to run the automatic 30-second blending program.
  3. Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
  4. After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.
  5. Do not blend continuously for more than one minute. After multiple consecutive extraction cycles, let the contents settle for 10–15 minutes; a continuously flashing control panel means stop, unplug and cool the motor for at least 15 minutes.

NutriBullet Triple Prep System

Press POWER, then choose an available speed, Pulse or attachment-specific program to start; use POWER in Sleep Mode to switch off.

  1. Lock a filled cup, pitcher with its lid, or work bowl onto the motor base and press POWER. The attachment determines the menu shown on the illuminated control panel.
  2. Select Low, Medium or High for continuous blending or processing. Press and release Pulse for controlled bursts; do not hold Pulse for more than one minute.
  3. With the pitcher, choose Purée for soups, sauces and spreads; Frozen Drinks for ice-blended drinks; Smoothie for fresh or frozen fruit and vegetables; or Nutmilk for the guide’s almond or cashew milk recipes.
  4. With a single-serve cup, choose Dressing for small salad dressings, Frozen Drinks or Smoothie. Keep cup blends cold, include sufficient liquid and stop within one minute.
  5. With the work bowl, use Chop for fresh ingredients such as onions, Dip for salsa and chunky dips, or Dough for small batches of pizza or tortilla dough. Pulse wet and dry dough ingredients together first; use Dough or Low once dough forms, never a higher speed.
  6. Use High with the reversible Slice/Shred Disc in its upper operating position. Start the motor before feeding food through the chute with the food pusher.
  7. The timer counts up for manual speeds, Chop and Dip, and down for other preset programs. The display enters Sleep Mode after a program ends, a speed is stopped or 60 seconds of inactivity; tap a program or speed to wake it, then select the required setting. Press POWER in Sleep Mode to switch off.
  8. Wait for blades or discs to stop and unplug before removing attachments. Cup blends require at least 10–15 minutes between cycles; after a thermal shutdown, unplug and cool the base for one hour.

NutriBullet Blender Combo 1200

Press POWER, then LOW, MEDIUM, HIGH or EXTRACT to blend, or hold PULSE for bursts; press the active speed/program or POWER to stop.

  1. Fit the filled pitcher with its lid and vented lid cap, or the sealed cup/blade assembly, onto the motor base before connecting power. Press POWER; its light shows the controls are ready.
  2. Press LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruit; MEDIUM for creamy soups, dips, nuts, sauces, spreads, mixed or powdered drinks and milkshakes; or HIGH for thick mixtures and frozen fruit or vegetables. Always include liquid.
  3. Press EXTRACT for a timed whole-fruit, vegetable and ice smoothie cycle. It ends automatically; press EXTRACT again or POWER to stop it early.
  4. Press and release PULSE for controlled chopping. Holding the button keeps the blades running until you release it; never use PULSE with hot ingredients.
  5. Press the active speed again to stop; its light goes out while POWER remains lit in idle mode. Press POWER again and unplug to finish. Pitcher speeds continue until stopped, while cup speeds stop after 60 seconds.
  6. Keep each continuous run within one minute. If the motor stops, unplug and cool for at least 15 minutes; do not open a warm sealed cup until it has cooled.

NutriBullet SmartSense Blender — Australia

Choose AUTO for smoothies or a manual speed with BLEND or PULSE for texture control, and press the solid circle to stop.

  1. For an AUTO blend, add enough liquid to cover all solid ingredients.
  2. Choose AUTO for a creamy smoothie or shake. Choose manual speed and PULSE for salsa or chunky dips.
  3. While blending, press the plus or minus button beside the display to change speed. The timer counts up in seconds.
  4. Press the solid circle to stop blending.
What if the display shows a flat line?

A flat line with BLEND or PULSE not working can mean the pitcher is not attached properly; reattach the pitcher and try again.

NutriBullet SmartSense Blender Combo

  1. While blending, press the plus or minus button beside the display to change speed. The timer counts up in seconds.
  2. Press the solid circle to stop blending.

NutriBullet Smart Touch Blender Combo

Press POWER, then a manual speed or displayed program to blend, or hold PULSE for bursts; press the active speed/program to pause and POWER to end that selection.

  1. Lock the filled cup/blade assembly, or the pitcher with its lid and cap, onto the base and press POWER. The panel lights up only when the vessel is secured; press the pitcher lid firmly down if the controls still show dashes.
  2. Select LOW for thin batters, gravy, marinades, eggs, cooked food and uncooked fruit; MEDIUM for creamy soups, sauces, spreads, dips, nuts, mixed or powdered drinks and milkshakes; or HIGH for thick mixtures and frozen-fruit or vegetable smoothies.
  3. Press a dimmed speed to change speed. Press the lit speed to pause the motor and timer, then any manual speed to resume. Cup speeds stop after 60 seconds.
  4. Press and release PULSE for controlled chopping. It runs only while held; do not hold it for more than one minute or use it with hot food.
  5. Choose PURÉES for smooth dips, sauces and spreads, FROZEN DRINKS for ice-blended drinks, or SMOOTHIES for fresh or frozen fruit and vegetables. SOUPS appears only with the pitcher and blends soup without heating it.
  6. When a program starts, its icon stays lit while the other controls disappear; the timer counts down and a beep signals completion. Programmed pulsing and speed changes are normal. Press the active program to pause and the same program to resume.
  7. Read elapsed time when using manual speed and time remaining during a program. Press POWER once to end the current selection and return to the main panel; from a paused cycle, press POWER twice to switch fully off, then unplug.
  8. Keep continuous runs within one minute. If the power/timer display flashes after the motor stops, unplug and cool for at least 15 minutes before reconnecting.

NutriBullet Power Core Blender

Press Power and choose LOW, MED, HIGH or SMOOTHIE to start, or hold PULSE for a burst; release PULSE or press the active speed to pause, and use Power to stop.

  1. After the filled vessel is secured, plug in and press the Power Button. The blending-mode lights illuminate from left to right. Select a speed once to start.
  2. Choose LOW for thin batters, gravy, marinades, eggs, cooked food and raw fruit; MED for creamy soups, dips, nuts, sauces, spreads, drinks and milkshakes; or HIGH for thick blends and frozen fruit or vegetables. Include sufficient liquid.
  3. Select SMOOTHIE for the timed automatic smoothie cycle. For controlled chopping, hold PULSE; blending stops when you release it.
  4. Press the current pitcher speed again to pause; the speed light goes out. Choose a setting to resume, or press Power to stop and wait for the blades to stop. Press Power again to switch off fully and unplug.
  5. For hot pitcher blends, begin on LOW and increase only after the mixture is smooth and steady. Keep the lid secured and the vents unobstructed.
  6. Limit blending to one minute total; do not extend it with consecutive cycles. If the thermal breaker shuts the motor off, unplug and cool the base for one hour.

NutriBullet Blender Combo 1000

Press POWER, choose LOW, HIGH or EXTRACT to blend, or hold PULSE for a burst; use the active speed/program or POWER to pause or stop.

  1. Lock the filled pitcher with its lid and vented lid cap, or the sealed cup/blade assembly, onto the base, connect power and press POWER. The power light shows that the controls are available.
  2. Press LOW for thin batter, gravies, marinades, eggs, cooked foods and uncooked fruits. Select HIGH for thick mixtures and frozen fruits or vegetables, with liquid in the vessel.
  3. Use EXTRACT for whole-fruit, vegetable and ice smoothies. The cycle stops automatically; EXTRACT again or POWER pauses or stops the cycle.
  4. For chopping, press and release PULSE; a held button runs continuously until released. Keep hot ingredients out of PULSE.
  5. Press the active speed again to pause or stop: its light goes out and POWER remains lit. Press POWER and unplug for full shutdown. Pitcher speeds continue until you stop them; cup speeds cut off at 60 seconds.
  6. Do not run continuously for more than one minute. If the motor stops, unplug the base and cool for at least 15 minutes before restarting. Let any warm sealed cup cool before opening away from your body.

NutriBullet Power Core Blender Combo

Press Power, then a pitcher speed or SMOOTHIE to blend, or hold PULSE for a pitcher burst; the single-serve cup uses SMOOTHIE, and Power stops blending.

  1. After the filled vessel is secured, plug in and press the Power Button. The blending-mode lights illuminate from left to right. Select a speed once to start.
  2. For the pitcher, choose LOW for thin batters, gravy, marinades, eggs, cooked food and raw fruit; MED for creamy soups, dips, nuts, sauces, spreads, drinks and milkshakes; or HIGH for thick blends and frozen fruit or vegetables. Include sufficient liquid.
  3. For pitcher blending, select SMOOTHIE for the timed automatic smoothie cycle. For controlled chopping, hold PULSE; blending stops when you release it.
  4. Press the current pitcher speed again to pause; the speed light goes out. Choose a setting to resume, or press Power to stop and wait for the blades to stop. Press Power again to switch off fully and unplug.
  5. For hot pitcher blends, begin on LOW and increase only after the mixture is smooth and steady. Keep the lid secured and the vents unobstructed.
  6. For a single-serve cup, press SMOOTHIE after locking the cup clockwise onto the base; wait for the blades to stop before powering off and unlocking the cup counterclockwise.
  7. Keep cup blending within one minute. Allow contents to settle for 10–15 minutes before another cycle, opening only once cool to release pressure. If thermal protection shuts the motor off, unplug and cool the base for one hour.

NutriBullet Power Core Plus

The Australian NutriBullet Power Core Plus (NBF07200AKP) offers Low, Medium and High speed settings. It also has Pulse and Smoothie settings. Follow the guide supplied with the blender for the start and stop sequence.

NutriBullet Portable Blender / Portable Blender McLaren

Press Power once to wake, wait about one second, then press again for a 20-second cycle; another press stops the blend early or pulses it.

  1. With the Cup aligned and locked and the Lid shut, press Power once to wake the blender. Wait about one second: a solid blue ring means ready.
  2. Press Power again to start a 20-second cycle; blue LEDs travel clockwise while blending. Press again to stop early or pulse. After two minutes idle, the lights go off and the blender sleeps.
  3. Hold Power for two seconds to check remaining charge. All six solid blue LEDs mean fully charged; blinking LEDs progressively become solid blue while charging; LED 1 flashing red means low battery.
  4. If the ring flashes red, stop and check Cup alignment. Add liquid within MAX and shake or invert to loosen trapped food; with power off, use a utensil to release a persistent blockage.
  5. Alternating top and bottom red LEDs mean too many blends: pause and let the motor cool, and do not exceed nine cycles in six minutes. A solid red ring also means stop and cool the motor.
  6. Never blend continuously or consecutively for more than one minute total. Before repeating a cycle, carefully open the cooled container to release pressure; keep the lid shut while blades move.

NutriBullet Flip Stainless

Press Power once to wake, wait about one second, then press again for a 30-second cycle; press during blending to stop or pulse, starting with the motor assembly on top before flipping.

  1. Fit the Cup firmly, snap the Flip-Top Lid closed and keep the Motor Base, Blade, and Lid on top. Press Power once; wait about one second for the ring to finish lighting. White means normal charge, yellow low charge, and red means recharge before blending. NEVER submerge the entire Motor Base, Blade, and Lid in water.
  2. Press Power again for a 30-second cycle. Once the motor starts, flip the blender so the blade assembly is at the bottom, and set it on a clean, dry, level surface. White LEDs circulate while blending; press Power during the cycle to stop or pulse.
  3. After the blades stop, return the motor assembly to the top and open the Flip-Top Lid slowly, pointing away from your body. Do not exceed one minute total for continuous or consecutive cycles.
  4. When charging with the supplied cable and Power Supply, solid green means full, flashing green ready for normal use, flashing yellow low and flashing red too low to blend. After 90 seconds idle all LEDs go off and the blender shuts down.
  5. If yellow flashes during use, check the Cup is tight enough for a white ring, then check for blocked blades, too little liquid or ingredients above MAX. Start with the blade assembly on top before flipping.
  6. If red flashes during use, stop and do not press Power for at least 90 seconds. Let the overheated blender cool; if the lockout remains after ten minutes, take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase).

NutriBullet Flip Tritan

Press Power once to wake, wait about one second, then press again for a 30-second cycle; press during blending to stop or pulse, starting with the motor assembly on top before flipping.

  1. Fit the Cup firmly, snap the Flip-Top Lid closed and keep the Motor Base, Blade, and Lid on top. Press Power once; wait about one second for the ring to finish lighting. White means normal charge, yellow low charge, and red means recharge before blending. NEVER submerge the entire Motor Base, Blade, and Lid in water.
  2. Press Power again for a 30-second cycle. Once the motor starts, flip the blender so the blade assembly is at the bottom, and set it on a clean, dry, level surface. White LEDs circulate while blending; press Power during the cycle to stop or pulse.
  3. After the blades stop, return the motor assembly to the top and open the Flip-Top Lid slowly, pointing away from your body. Do not exceed one minute total for continuous or consecutive cycles.
  4. When charging with the supplied cable and Power Supply, solid green means full, flashing green ready for normal use, flashing yellow low and flashing red too low to blend. After 90 seconds idle all LEDs go off and the blender shuts down.
  5. If yellow flashes during use, check the Cup is tight enough for a white ring, then check for blocked blades, too little liquid or ingredients above MAX. Start with the blade assembly on top before flipping.
  6. If red flashes during use, stop and do not press Power for at least 90 seconds. Let the overheated blender cool; if the lockout remains after ten minutes, take your claim, with your receipt, to the place of purchase (the manufacturer warranty is 12 months from the date of purchase).

NutriBullet Flex Portable / Flex Portable McLaren

Press Power once to wake, wait about one second, then press again for a 30-second cycle; press during the cycle to stop early or pulse.

  1. Lock the Cup and Blade Block onto the Motor Base. The ring lights white clockwise and flashes twice when correctly locked; three orange flashes when you press Power mean the Blade Block is misaligned or incompletely locked. Refit gently without forcing it.
  2. Press Power once and wait about one second for the LED animation and battery display. Press Power again for a 30-second cycle; the ring moves clockwise and becomes solid white at completion. Press during the cycle to stop early or pulse.
  3. Keep continuous blending and consecutive cycles within one minute in total. After the blades stop, check the Cup is cool before removing it. If it feels warm, leave it on the base untouched and follow the cooling steps below.
  4. For a cool Cup, hold the Cup and Motor Base and gently twist the Cup off without pushing down or gripping the Sip Lid.
  5. After 90 seconds without use, the ring moves white counterclockwise and the blender goes into sleep mode.
How do I read the battery display?
  • Four solid white bars mean full charge; three white plus a flashing fourth mean 75–99%; two white plus a flashing third mean 50–75%; one white plus a flashing second mean 25–50%; a flashing first white bar means 0–25%.
  • A solid orange first bar means low charge; solid red means charge is needed and blinking red means the battery is too depleted to operate. A flashing orange first bar shows charging from 0%. You may blend while plugged in once the first bar turns white; charging pauses while the motor runs.
What if the Cup feels warm?
  1. Do not blend again or open or remove the Cup. Leave it on the Motor Base for at least 30 minutes and longer until it is fully cool.
  2. Once cool, slowly open the Sip Lid away from your face and body, then pour the contents into a separate vessel.
What if the ring flashes orange six times?
  1. Switch off and unplug the charger before detaching the Cup and Blade Block together.
  2. Gently shake the closed contents to release stuck ingredients, then reattach clockwise. Never put a hand or utensil inside the Cup to clear a blockage.
What if the ring flashes red for three seconds and stays red?

Stop blending and let the motor cool before further use.

NutriBullet GO

Hold Power for three seconds to wake, press it twice quickly for the 30-second blend, and press once to stop early.

  1. Fasten the Cup onto the Motor Base and hold Power for three seconds. Blue flashes for 30 seconds when locked and ready; if red and blue flash together, continue tightening the Cup. If the ready period expires, hold Power three seconds to wake again.
  2. Set the base on a dry, level surface and press Power twice quickly to start the automatic 30-second cycle. Steady blue means running and flashing blue after blending means finished.
  3. Press Power once to stop early; the blue light turns off. Wait for the blades to stop before inverting and unscrewing the Motor Base. The motor automatically stops after three seconds if started with an empty cup; never deliberately run it empty.
  4. Limit operation to two consecutive cycles or one minute continuously. Five red flashes mean overheating: stop and let the motor cool. Ten red flashes mean food is blocking the blades: switch off, wait for the blades to stop, invert the assembly, remove the Cup and reduce excess food below MAX before refitting.
  5. A red light flashing for 30 seconds means the battery needs charging. While plugged in, steady red means charging and steady blue means fully charged. No light means powered off.

NutriBullet Juicer 800W

Turn the speed dial to LOW for soft produce or HIGH for harder produce, and return it to OFF to stop juicing.

  1. Original Juicer 800W (NBJ07100): Seat the Pulp Basin and Sieve, fit the Basin Cover, lock the handle upright and place the lidded pitcher under the open spout before plugging in.
  2. Turn the Dual-Speed Control Dial to LOW for softer fruits and vegetables or HIGH for harder produce such as carrots and beetroot.
  3. Start the motor before adding produce and use only the Food Pusher; feed gradually and empty a full pulp basin with the power off.
  4. Turn the dial to OFF to stop juicing. Wait until the Sieve stops before moving the pitcher or unlocking the cover, then unplug.
  5. If no speed is selected for ten minutes the juicer switches off. A stop during use can mean the Locking Handle has moved: switch off and securely relock it before restarting.
  6. After ten minutes of continuous operation, unplug and leave off for 15 minutes. If overheating stops the motor, allow the same cooling time before reuse.

NutriBullet Cold Press Slow Juicer

Press ON to juice and OFF to stop; use REV only for stuck food, selecting OFF and waiting for the Auger to stop before changing direction.

  1. Before connecting power, set the switch OFF and check the Juice Bowl and its cover are locked and the juice and pulp containers are under the spouts.
  2. Press ON to start the motor, then feed prepared produce gently with the Food Pusher. OFF stops it; REV is only for releasing stuck food.
  3. Always select OFF and wait for the Auger to stop before changing between ON and REV. For a jam, switch OFF, press the RESET beneath the base, then hold REV for a few seconds; if it stays stuck, switch off, unplug and reassemble.
  4. Opening the wide chute lid pauses the motor for loading; closing it restarts the Auger. If the Juice Bowl lid is disconnected, the motor stops.
  5. Stop and empty both containers when the juice container fills. Limit rapid or firm-pressure juicing to 15 minutes, rest one minute between uses, and cool at least 15 minutes after an overheat shutdown.

NutriBullet Juicer Pro 1000W

Press LOW for soft produce, HIGH for harder produce or TURBO for the toughest vegetables; press the active speed to stop, then centre Power to switch off.

  1. Seat the Pulp Basin and Sieve, fit the Basin Cover, lock the handle upright and place the lidded pitcher under the open spout before plugging in.
  2. Press LOW for soft produce, HIGH for harder produce such as pineapple, or TURBO for the toughest vegetables such as beetroot and carrots. The selected speed lights up; change speed as your ingredients change.
  3. Start the motor before adding produce and use only the Food Pusher; feed gradually and empty a full pulp basin with the power off.
  4. Press the active speed once to stop juicing; press centre Power to switch off completely. Wait until the Sieve stops before moving the pitcher or unlocking the cover, then unplug.
  5. If no speed is selected for ten minutes the juicer switches off. A stop during use can mean the Locking Handle has moved: switch off and securely relock it before restarting.
  6. After ten minutes of continuous operation, unplug and leave off for 15 minutes. If overheating stops the motor, allow the same cooling time before reuse.
  7. Three power-button flashes followed by a steady light when a speed is selected indicate incorrect assembly: switch off and reseat the Pulp Basin and Locking Handle. All lights flashing three times signal overheating; unplug and cool for 15 minutes.

NutriBullet Cold Press Batch Juicer

Turn the dial right to ON to juice, left briefly to REVERSE for stuck ingredients, and to OFF to stop.

  1. With the dial OFF, fit the Juicing Bowl, Auger and Hopper, place both cups under their spouts and close the Lid. The motor does not start without the Auger and closed Lid.
  2. Turn the dial right to ON to extract juice; open the Juice Spout Cover so the bowl can drain. Feed prepared produce without overloading, using the 2-in-1 Pusher and Scraper Tool only.
  3. Turn the dial left to REVERSE briefly to release stuck ingredients. For manual clearing, turn OFF and unplug before touching or removing parts.
  4. Turn the dial OFF to stop, unplug, and wait for the Auger to stop before opening the Hopper. If overheating stops the motor, unplug and cool for at least 15 minutes.

NutriBullet CrispLite Air Fryer 6L

Press Power, use Menu to select the flashing program, check time and temperature, and press Start/Stop to begin or pause cooking.

  1. Seat the Cooking Basket fully, connect power and press Power to show the control panel.
  2. Press Menu until the program you want flashes, check its displayed time and temperature, then press Start/Stop to begin.
  3. Select Fries for a starting setting of 200°C and 20 minutes; adjust to suit the recipe.
  4. Select Chicken for a starting setting of 180°C and 30 minutes; adjust to suit the recipe.
  5. Select Steak for a starting setting of 200°C and 16 minutes; adjust to suit the recipe.
  6. Select Bake for a starting setting of 160°C and 16 minutes; adjust to suit the recipe.

Next steps

  1. Select Vegetable for a starting setting of 180°C and 16 minutes; adjust to suit the recipe.
  2. Select Seafood for a starting setting of 180°C and 16 minutes; adjust to suit the recipe.
  3. Press Temp/Time, then +/− to change one minute or 5°C per press; select the desired time and temperature, then press Start/Stop. You may change settings during cooking.
  4. Press Start/Stop to pause before removing the basket to turn food; refit it securely and press the same button to resume. Wait after the completion beeps before taking out hot food with a utensil.
  5. The fryer powers off after five minutes idle with the basket in, ten minutes with it out, or ten minutes paused. Hold Power for five seconds to reset settings during cooking.
How do I switch off after cooking?
  • Hold Power until the fryer switches off after cooking, then unplug before letting it cool for cleaning. NEVER submerge the main unit in water.

NutriBullet XXL Digital Air Fryer 7L

Press Power, use Menu to select the flashing program, check time and temperature, and press Start/Stop to begin or pause cooking.

  1. Seat the Cooking Basket fully, connect power and press Power to show the control panel. NEVER submerge the main unit in water.
  2. Press Menu until the program you want flashes, check its displayed time and temperature, then press Start/Stop to begin.
  3. Select Fry for a starting setting of 200°C and 15 minutes; adjust to suit the recipe.
  4. Select Pork & Lamb Chops for a starting setting of 200°C and 20 minutes; adjust to suit the recipe.
  5. Select Bake for a starting setting of 180°C and 30 minutes; adjust to suit the recipe.
  6. Select Poultry for a starting setting of 200°C and 20 minutes; adjust to suit the recipe.
  7. Select Fish for a starting setting of 200°C and 12 minutes; adjust to suit the recipe.

Next steps

  1. Select Steak for a starting setting of 200°C and 25 minutes; adjust to suit the recipe.
  2. Select Dried Fruit for a starting setting of 30°C and 4 hours; adjust to suit the recipe.
  3. Select Shellfish for a starting setting of 180°C and 12 minutes; adjust to suit the recipe.
  4. Press Temperature/Time until time or temperature flashes, then adjust with +/−. During cooking first press Start/Stop to pause; adjust, then press Start/Stop again to resume.
  5. Press Start/Stop to pause before removing the basket to turn food; refit it securely and press the same button to resume. Wait after the completion beeps before taking out hot food with a utensil.
  6. After ten minutes idle the fryer enters standby; press Power to wake. To cancel, hold Power: the readings flash and beeps sound; Power reappears after 30 seconds and pressing it returns to the main screen.
  7. After a turning pause, the timer may add time while the fryer adjusts its temperature.

NutriBullet Twin Drawer Air Fryer

Select L, R or SYNC, choose the mode with Menu and check time/temperature, then press Start/Stop to cook or pause; hold Start/Stop for three seconds to cancel the selected drawer.

  1. Fit the Drawers fully and connect power. Select L or R for one drawer, or SYNC to give both drawers the same mode. NEVER submerge the main unit in water.
  2. Press Menu until the mode is fully lit; use Time Select or Temperature Select to inspect settings, then Start/Stop to cook. The active program and Cooking Indicator remain lit. Set the other drawer separately if required.
  3. Select Fry to load 200°C and 20 minutes, then adjust if the recipe requires it.
  4. Select Steak to load 200°C and 12 minutes, then adjust if the recipe requires it.
  5. Select Fish to load 200°C and 12 minutes, then adjust if the recipe requires it.
  6. Select Shellfish to load 180°C and 12 minutes, then adjust if the recipe requires it.
  7. Select Poultry to load 200°C and 25 minutes, then adjust if the recipe requires it.

Next steps

  1. Select Bake to load 180°C and 12 minutes, then adjust if the recipe requires it.
  2. Select Veggie to load 160°C and 16 minutes, then adjust if the recipe requires it.
  3. Select Dried Fruit to load 50°C and 5 hours, then adjust if the recipe requires it.
  4. Select L, R or SYNC, then Time Select or Temperature Select and +/− to change settings before or during cooking. Temperature changes in 5°C steps; normal programs use 1-minute steps from 1–60 minutes. Dried Fruit changes by 15 minutes from 1–12 hours and displays hours and minutes.
  5. Press Start/Stop to pause; remove a drawer carefully by its handle for turning, then refit and resume. Hold Start/Stop three seconds to cancel the selected drawer.
  6. After five minutes without a selection the fryer goes to standby. Hold L, R or SYNC to wake. Five beeps announce cooking finished; wait a few seconds before removing food.

NutriBullet CrispLite Vision Air Fryer 8L

Press Power, use Menu to select the flashing program, check time and temperature, and press Start/Stop to begin or pause cooking.

  1. Seat the Cooking Basket fully, connect power and press Power to show the control panel.
  2. Press Menu until the program you want flashes, check its displayed time and temperature, then press Start/Stop to begin.
  3. Select Fries for a starting setting of 200°C and 20 minutes; adjust to suit the recipe.
  4. Select Chicken for a starting setting of 180°C and 30 minutes; adjust to suit the recipe.
  5. Select Steak for a starting setting of 200°C and 16 minutes; adjust to suit the recipe.
  6. Select Bake for a starting setting of 160°C and 16 minutes; adjust to suit the recipe.
  7. Select Vegetable for a starting setting of 180°C and 16 minutes; adjust to suit the recipe.

Next steps

  1. Select Seafood for a starting setting of 180°C and 16 minutes; adjust to suit the recipe.
  2. Select Shellfish for a starting setting of 200°C and 16 minutes; adjust to suit the recipe.
  3. Select Dehydrate for a starting setting of 50°C and 5 hours; adjust to suit the recipe.
  4. Use the separate Temperature +/− and Time +/− buttons: one press changes 5°C or one minute. Settings may be adjusted while cooking.
  5. Press the Light icon to switch the interior light on or off; it turns off automatically after one minute.
  6. Press Start/Stop to pause before removing the basket to turn food; refit it securely and press the same button to resume. Wait after the completion beeps before taking out hot food with a utensil.
  7. The fryer powers off after five minutes idle with the basket in, ten minutes with it out, or ten minutes paused. Hold Power for five seconds to reset settings during cooking.
How do I switch off after cooking?
  • Hold Power until the fryer switches off after cooking, then unplug before letting it cool for cleaning. NEVER submerge the main unit in water.

NutriBullet CrispLite Dual Stack / Stacked Air Fryer 9L

Press Power, select a basket and program, adjust Temp and Time, then press Start/Pause to begin or pause cooking.

  1. Fit both Baskets, connect power and press Power after the initial one-second display. Choose Upper Basket or Lower Basket; its indicator flashes. Hold that Basket button for two seconds to cancel selection.
  2. Choose a program icon, adjust temperature with Temp +/− and duration with Time +/−, then press Start/Pause. The selected program changes from flashing to steady while cooking.
  3. Select Fries to load 200°C for 20 minutes.
  4. Select Steak to load 200°C for 15 minutes.
  5. Select Seafood to load 180°C for 15 minutes.
  6. Select Chicken to load 180°C for 30 minutes.
  7. Select Bake to load 160°C for 15 minutes. Adjust within 80–170°C and 1–60 minutes.
  8. Select Pizza to load 160°C for 20 minutes.

Next steps

  1. Select Veggie to load 180°C for 15 minutes.
  2. Select Dehydrate to load 50°C for 5 hours. Adjust within 40–70°C and 1 minute–24 hours.
  3. Select Reheat to load 160°C for 10 minutes.
  4. For independent cooking, select and program each Basket separately. Press SYNC Finish to delay the shorter program so both end together; press Dual Basket to use matching parameters and start both at once. If both use the same preset, only one icon may show.
  5. Press Start/Pause to pause and again to resume. Removing a Basket pauses its cooking until it is refitted.
  6. Press Light to toggle the interior light; it also switches off after 15 seconds. Press Shake to enable or disable reminders; when it beeps and flashes, cooking continues until you remove the basket to shake and refit it to clear the reminder.
  7. Power or ten minutes idle puts the fryer into standby. At the end, three beeps signal completion; wait briefly before removing food. Hold Power to switch off after cooking. NEVER submerge the main unit in water.
Which range applies to the other cooking programs?
  • For Fries, Steak, Seafood, Chicken, Pizza, Veggie and Reheat, adjust within 80–200°C and 1–60 minutes; Bake and Dehydrate use their separate limits above.

NutriBullet Immersion Blender 800W

Hold I for low speed and adjust its dial, or use II for high-speed arm blending after starting low; release the button to stop, and use only I for whisking or chopping.

  1. Lock the chosen arm, whisk or chopping-bowl attachment while unplugged. For arm/whisk use, submerge it upright before connecting power or pressing a button; for chopping, lock the lid and hold both motor body and bowl. NEVER submerge the main unit in water.
  2. Hold I for low speed. Turn the variable dial right to increase speed while holding I; the dial works only with the low-speed button. Begin on low, then hold II for high speed with the blending arm if needed after food breaks down.
  3. Use I for whisking, and only I for chopping. The whisk needs liquid and a run shorter than two minutes; hard permitted chopper foods need bursts of no more than five seconds.
  4. Release the button to stop; wait for motion to cease before lifting an attachment, then unplug before removal. Keep ordinary blends generally under one minute and allow at least five minutes cooling between uses. A hot motor that has stopped needs one hour unplugged to cool.

NutriBullet EveryGrain Cooker

Press Power, select White Rice, Brown Rice, Quinoa, Oats, Grains or Steam, and press Start/Stop to cook or cancel; set the Steam time with the arrows before starting.

  1. Lock the loaded Cooking Pot/lid assembly, connect the cord and plug in. Listen for a beep, then press the blue Power button; available programs illuminate white.
  2. Press White Rice for white/jasmine/basmati/sushi rice; Brown Rice for whole-grain brown/brown basmati; Quinoa for any colour; Oats for rolled/steel-cut oats; or Grains for other grains such as amaranth, farro, spelt, buckwheat or millet. The chosen button lights fully; select another to change it.
  3. For Steam only, add one scoop of water to the Cooking Pot, fit the basket and press Steam. From 0:00, press/hold arrows to set one-minute increments, up to one hour. You can also steam in the basket while a grain program cooks below.
  4. For a delay, first choose the program, press Delay Start, and change the default 2:00 with arrows in 15-minute steps between 15 minutes and 12 hours. Press Start/Stop to begin the delay countdown or start cooking immediately without a delay.
  5. During cooking, cascading lines show activity. Grain programs beep and begin a countdown with ten minutes remaining; Steam preheats for 5–9 minutes before its countdown starts.
  6. At completion, a beep announces Keep Warm and the timer counts upwards, for up to three hours. Remove tender foods promptly and stir rice within 30 minutes. Press Start/Stop to cancel cooking or end Keep Warm; switch off, unplug and cool completely before handling parts. NEVER submerge the main unit in water.
Why will the program not start?
  • Check the power connection, close the lid until it clicks and select a program before pressing Start/Stop. An open/unlocked lid or no selected program prevents operation.

NutriBullet Food Processor

Press LOW or HIGH for continuous processing, hold PULSE for a burst and release it to stop, or press OFF to stop continuous operation.

  1. Assemble the correct single blade/disc and loaded Work Bowl, align the lid arrows and turn the bowl clockwise onto the base until it clicks. Plug in only after the lid and bowl are locked.
  2. Press LOW or HIGH for continuous mixing/chopping; press and hold PULSE for a high-speed burst. PULSE stops when released; the current speed is shown by its blue light.
  3. For dough use PULSE to cut butter into flour, then LOW for mixing/kneading until a loose ball forms; do not use HIGH for dough. Use HIGH for slicing/shredding/spiralising and feed gently with the supplied pusher.
  4. Press OFF to stop continuous LOW/HIGH. Wait for the blade to stop, unplug and then unlock the bowl. Run for no more than one minute at a time, resting at least one minute between cycles.
What do the flashing lights mean?
  • If the lid unlocks, the motor stops and blue button lights flash: switch OFF, unplug and relock the lid and bowl before retrying. If it stops with three flashes after extended running, unplug for 15 minutes; future runs must still follow the one-minute safety limit.

NutriBullet Chill

Select Ice Cream, Sorbet, Gelato, Frozen Yogurt or Smoothie Bowl and press the centre Start/Stop button; tap it to pause/resume or hold it for two seconds to cancel.

  1. Use a recipe frozen level for at least 24 hours, between MIN FILL and MAX FILL, and process within five minutes of freezer removal. Retract the dry Blade Shaft fully, lock the Blade Block onto the cup and lock the inverted cup shaft-first onto the base.
  2. Turn on and select Ice Cream, Sorbet, Gelato, Frozen Yogurt or Smoothie Bowl. Press the centre Start/Stop button; each program takes about 3–4½ minutes.
  3. The selected program stays lit and the progress ring advances clockwise. Pauses and a quick pulse during operation are normal; all five progress segments and a beep indicate completion. Tap Start/Stop to pause/resume; hold it for two seconds to cancel and return the blade home.
  4. After all blade motion stops, hold the Cup Release button and turn the cup counterclockwise off the base. Unplug and turn the Blade Block counterclockwise to remove it; grip its plastic part, not a hot shaft.
What should I do with red indicators?
  • Solid centre button plus CHECK BLADE: remove cup and block, retract the shaft until the blade rests against the block and reinstall. If this happened mid-run, follow the recipe/fill requirements before trying again.
  • Solid centre button alone: a removed cup or blocked/improper load can interrupt mixing. Clear the remaining mixture/blockage, reset the blade and reinstall; tap the centre button when prompted to reset home.
  • Flashing red centre button: at installation, tap it to return the drive shaft home. After an automatic interruption, remove cup/block, clear any blockage, reset the blade and check the fill is above MIN and below MAX before reinstalling.
  • Solid red progress ring: stop using the Chill and request support for the internal hardware error.

NutriBullet Limitless Food Processor

Slide the toggle to ON for continuous processing, hold it at PULSE for a burst that stops on release, and return it to OFF to stop continuous use.

  1. Do not process nuts or other hard ingredients. Fit one blade/disc, load within the food-specific capacity and LIQUID MAX limit, lock the lid clockwise and the bowl clockwise onto the base until it clicks. With the Endless Chute, fit the slinger and disc first and put a receptacle underneath.
  2. Slide the handle toggle to ON for continuous processing; it remains ON until you move it. Slide and hold at PULSE for a burst; releasing it returns the toggle to OFF.
  3. For discs, start the motor before feeding with gentle pusher pressure. Use 5–10 pulses for prepared fruit/vegetables or herbs, 5–10 seconds for meat/seafood or chopped cheese, 10–20 seconds for slicing/shredding, and 30 seconds for dough. Endless Chute operation times out at 120 seconds.
  4. Slide to OFF, wait for blade/disc motion to stop, then unplug before unlocking the bowl/lid or removing food. Never tip a loose blade into your hand.
Why does the processor stop or fail to start?
  • Check the powered outlet, lid/handle markings and bowl click-lock. If the chute is blocked or the bowl fills to just below the disc, turn OFF, unplug and clear/empty it with a spoon, spatula or pusher before reassembling.

NutriBullet Baby

Push the assembled vessel down and turn it clockwise to start the motor, then turn counterclockwise to stop it.

  1. Assemble the Short Cup with cooled food/liquid and blade, or the Batchbowl with blade, food/liquid, lid and vented cap. Stay below the matching MAX line and place the vessel on the Motor Base.
  2. Push down and turn clockwise to engage the motor. Blend only until the desired consistency is reached; do not run continuously beyond one minute.
  3. Turn counterclockwise to disengage. Wait for motion to stop, lift the vessel off and unplug before taking it apart. Cool a warm sealed cup fully before opening away from your body.
  4. If the motor stops working, unplug and leave it to cool for a few hours before retrying; do not override the interlock.

NutriBullet Baby Steam + Blend

Turn the dial to Steam, Blend or Steam + Blend and press Power to run; for Pulse, select Blend and hold Power for three seconds, then hold for bursts and release to stop.

  1. Lock the lid clockwise and the bowl counterclockwise onto the base. For steaming, fill the reservoir with cold water while off and cool and lock its cap. Connect power; one beep and a steady blue light mean ready.
  2. Turn the Setting Dial to Steam and press Power to steam. For Blend, choose Blend and press Power for the automatic one-minute cycle; press Power again to return to Standby early.
  3. Select Steam + Blend and press Power for steaming followed automatically by blending. A flashing blue indicator is normal during running; five beeps indicate completion and Standby.
  4. For Pulse, set Blend and hold Power for three seconds until three beeps. Hold Power for a burst and release to stop. Pulse exits after 60 seconds without action, or if the dial is moved or the bowl removed.
  5. To defrost a frozen baby-food serving, fill water to the 10-minute line, put the portion in the Work Bowl, select Steam and press Power. Check food temperature before feeding.
  6. Switch off and unplug after use. Let the bowl cool for at least ten minutes and until all parts are cool and motionless before disassembly.
What do beeps or a stopped cycle mean?
  • Six beeps: remove and refit the Work Bowl and fully close the lid. Stopped when the lid opened: close it and press Power to resume.
  • Three beeps with flashing blue during steaming: water is low. Switch off, unplug and cool completely before adding room-temperature water; never refill while hot. A steady blue light shows ready; press Power to resume.

Magic Bullet To Go 200W

Press the sealed cup down to blend and release to stop, or press and twist clockwise for hands-free operation and untwist anticlockwise to stop it.

  1. Align the sealed cup tabs with the motor base and press down to blend; release pressure to stop.
  2. For hands-free operation, press down and twist clockwise until the tabs lock under the lip of the base. Twist anticlockwise to stop lock-on operation.
  3. Keep each run within one minute and wait for the blades to stop before lifting off the cup.
  4. If the motor stops working, unplug the base and cool it for a few hours before attempting use again.

Magic Bullet Value Pack 200W

Press the sealed cup down to blend and release to stop, or press and twist clockwise for hands-free operation and untwist anticlockwise to stop it.

  1. Align the sealed cup tabs with the motor base and press down to blend; release pressure to stop.
  2. For hands-free operation, press down and twist clockwise until the tabs lock under the lip of the base. Twist anticlockwise to stop lock-on operation.
  3. Keep each run within one minute and wait for the blades to stop before lifting off the cup.
  4. If the motor stops working, unplug the base and cool it for a few hours before attempting use again.

Magic Bullet Blender Combo

Turn the dial left for LOW or right for HIGH, returning it to HOME to stop; with the dial centred, hold PULSE to blend and release to stop.

  1. Lock the prepared cup or pitcher onto the base. Leave the dial at HOME until ready; HOME is the stopped position.
  2. Turn left for the preset LOW-speed cycle or right for the preset HIGH-speed cycle; start pitcher blends on LOW and increase once ingredients combine.
  3. For pulse blending, leave the dial centred and hold the PULSE button. Releasing it stops the blades.
  4. Return to HOME after a cycle, and before selecting the next LOW, HIGH or PULSE operation; wait for the blades to stop before removing the vessel.
  5. After two cup cycles, wait 10–15 minutes before another; do not open a warm cup. Allow at least 30 minutes and longer until fully cool before opening away from your body.

Magic Bullet Mini Juicer

Press the Power Button down to ON to start the Sieve, and up to OFF to stop it.

  1. Before plugging in, set Power up to OFF and verify the Juice Bowl fits its keyed position, both arms are locked, the pulp bin is attached and the spout points down over the Cup.
  2. Press the Power Button down to ON to start the Sieve before feeding prepared produce. Use the Food Pusher gently; stop and empty the Pulp Bin when full or the Juice Cup when it reaches MAX.
  3. Press Power up to OFF to stop; wait for the Sieve to stop, unplug and then remove the Cup and turn the spout cap upward. Do not release the arms while the Sieve rotates.
  4. If ON does not start the motor or it stops midway, switch OFF and check the bowl seating, locked arms and plug. Check that Power was not accidentally moved to OFF. Correct the cause before switching ON again.
  5. For overheating, unplug and cool 15 minutes before resuming.

Magic Bullet Kitchen Express 250W

Turn the knob to ON for continuous operation and back to OFF to stop, or hold PULSE for bursts that end when you release it.

  1. Start with the knob OFF and fully lock the cup, or the work bowl and lid, onto the motor base.
  2. Turn to ON for continuous blending or food processing; it keeps running until you turn back to OFF.
  3. Hold the knob at PULSE for short bursts that let you control texture; release it and the knob returns to OFF.
  4. Use ON with the slicing/shredding disc and guide food with the supplied pusher, without force.
  5. Do not run longer than one minute at a time. Turn OFF, wait for the blade to stop and unplug before disassembly.

Magic Bullet Air Fryer 2.5L

Set the Temperature Dial for the recipe and turn the Timer clockwise to start cooking; let it reach zero or turn it fully anticlockwise to stop.

  1. With the Fry Pot clicked into place and the appliance plugged in, turn Temperature Dial to the highest setting and set Timer for three minutes to preheat. For a time below ten minutes, first turn past ten clockwise, then back anti-clockwise.
  2. Prepare food, refit the pot flush with the Base and set Temperature Dial for the recipe. Turn Timer clockwise to the desired cooking time; the two lights come on and cooking starts. NEVER submerge the main unit in water.
  3. Green, on the left, means heating to the selected temperature and goes out when reached. Orange, on the right, means the Timer is running; it goes out when the Timer reaches zero.
  4. Let Timer return to zero for automatic shutoff. Turn it anti-clockwise to shorten the remaining time or fully anti-clockwise to stop manually.
  5. If cooking does not start, check the wall plug, push the Fry Pot until it audibly clicks and make sure the Timer is set.
  6. After cooking stops, wait a few seconds before pulling out the Fry Pot by its handle. Keep hands and face away from steam, turn both dials to zero and unplug after use.

NutriBullet Ultra Plus+ Compact Kitchen System

Use the solid circle for a 30-second cup blend or processor cycle, and the dashed circle for cup pulses or short grinder pulses; never use PULSE with the work bowl.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; the touch panel should illuminate.
  2. Touch the solid circle to run the automatic 30-second blending program.
  3. Tap the dashed circle for short pulses, or hold it for a longer pulse; release it to stop. Use these bursts when you want to control the final consistency.
  4. After the motor and blades stop, check that the cup is cool before twisting anticlockwise to unlock it. Leave a warm or hot cup on the base for at least 30 minutes and longer until completely cool; unplug before removing the blade.
  5. Keep continuous blending within one minute and do not exceed six consecutive 30-second cycles. Between cycles, open only a cool cup carefully to release pressure; after repeated cycles let contents settle for 10–15 minutes. A continuously flashing panel after repeated cup blends requires unplugging and at least 15 minutes of cooling.
  6. With the processor attachment, use only the solid-circle 30-second cycle; never use PULSE for the work bowl. Start before adding food to the chute.
  7. With the Coffee & Dry Spice Grinder, use the dashed circle in short 1–2 second pulses; release it to stop.

NutriBullet 600 Mega Pack

There is no separate program button: gently push and twist the sealed cup clockwise to blend, then push and untwist it anticlockwise to stop.

  1. Align the assembled cup with the motor base, gently push down and twist clockwise to blend; there is no separate program to select.
  2. To stop, gently push and untwist the cup anticlockwise; wait for the blades to stop before lifting it off.
  3. Do not run continuously for more than one minute. If the motor stops unexpectedly, unplug the base and let it cool for at least 15 minutes before another attempt. Let any warm cup cool before carefully opening it.

For the supplied extractor-blade cup; use the separate instructions supplied with any milling attachment.

NutriBullet Turbo 1000 Deluxe Set

Clockwise cup locking starts the automatic 45-second cycle without a start button; an anticlockwise twist stops it early.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
  2. To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
  3. For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.
  4. Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

NutriBullet Turbo Ultimate Pack

Clockwise cup locking starts the automatic 45-second cycle without a start button; an anticlockwise twist stops it early.

  1. Lock the sealed cup clockwise onto the motor base until it clicks; this starts the automatic 45-second cycle, without a start button.
  2. To stop before the cycle ends, twist anticlockwise and wait for the blades to stop before lifting the cup.
  3. For another permitted cycle, unlock anticlockwise and then refit and lock clockwise again.
  4. Do not exceed three consecutive 45-second cycles; allow the contents to settle for 10–20 minutes after repeated cycles. If the blender stops after consecutive use, unplug and cool it for at least 20 minutes; if the motor has overheated under a heavy load, allow one hour.

NutriBullet Juicer 800W 2.0

Align I for LOW or II for HIGH to the white dot, then press the centre Power Button to start juicing and press it again to stop.

  1. Assemble with the centre Power Button OFF and the No-Drip Spout facing down over the pitcher. Connect power, then align the single-line I mark to the white dot for LOW or the double-line II mark for HIGH.
  2. Press the centre Power Button to start: the green indicator ring becomes visible. Use LOW for soft fruit and vegetables or HIGH for carrots, beetroot and other hard produce; start the motor before feeding.
  3. Press the centre button to stop; OFF leaves the button flush with the Dial Ring and hides the green ring. Unplug and wait for the Sieve to stop before tilting out the pitcher and pointing the No-Drip Spout upward.
What if the motor stops?

If the motor stops, unplug and let it cool for at least 15 minutes before another attempt.

Still need help? Chat with us and give us your model name and product code.

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 900 Essentials Set NB9-0807DG user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 900 Mega Pack NB9-1107AK user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: NutriBullet 1000 Essentials McLaren user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Triple Prep System user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Blender Combo 1200 user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Smart Touch Blender Combo user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Power Core Blender user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Blender Combo 1000 user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Power Core Blender Combo user guide (PDF)

The full steps for this model are in its user guide: McLaren Flex Papaya user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Immersion Blender 800W user guide (PDF)

The full steps for this model are in its user guide: NutriBullet EveryGrain Cooker user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Food Processor user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Chill user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Limitless Food Processor user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Baby user guide (PDF)

The full steps for this model are in its user guide: NutriBullet Baby Steam + Blend user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the Magic Bullet Value Pack 200W user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the user guide (PDF)

The full steps for this model are in its user guide: Read the NutriBullet Flip Tritan user guide (PDF)

The full steps for this model are in its user guide: NutriBullet SmartSense Blender Combo user guide (PDF)

Related articles

Contact us